Determination of Fracture Toughness of Anisotropic Rocks by Boundary Element Method

SummaryThis paper presents a systematic procedure for determining fracture toughness of an anisotropic marble using the diametral compression test (Brazilian test) with a central crack on the discs. Additionally, a novel formulation to increase the accuracy in Stress Intensity Factor (SIF) calculations using Boundary Element Method (BEM) is applied to determine the stress intensity factors and the fracture toughness of anisotropic rocks under mixed-mode loading. The numerical results show that the SIFs for both isotropic and anisotropic problems are in good agreement with those reported by previous authors. The marble with clear white-black foliation from Hualien (in eastern Taiwan), was selected for the Brazilian tests. Diametral loading was conducted on the Cracked Straight Through Brazilian Disc (CSTBD) specimens to evaluate their fracture toughness. In addition, a new fracture criterion was developed to predict pure mode I, pure mode II or mixed mode (I–II) fracture toughness of the anisotropic marble. The new fracture criterion is based on the examination of mode I, mode II and mixed mode (I–II) fracture toughness for different crack angles and anisotropic orientation.

[1]  Makoto Isida,et al.  Arbitrary loading problems of doubly symmetric regions containing a central crack , 1975 .

[2]  I. L. Lim,et al.  Stress intensity factors for semi-circular specimens under three-point bending , 1993 .

[3]  B. Amadei,et al.  Determination of deformability and tensile strength of anisotropic rock using Brazilian tests , 1998 .

[4]  A. A. Griffith.  The Phenomena of Rupture and Flow in Solids , 1921 .

[5]  Xinming Li,et al.  Analysis and modification of fracture criteria for mixed-mode crack , 1989 .

[6]  B. Amadei.  Rock Anisotropy and the Theory of Stress Measurements , 1983 .

[7]  S. E. Kovchik,et al.  Fracture of discs containing cracks , 1967 .

[8]  Chengcheng Xu,et al.  The use of the cracked Brazilian disc geometry for rock fracture investigations , 1994 .

[9]  Finn Ouchterlony,et al.  A presentation of the ISRM suggested methods for determining the fracture toughness of rock material , 1987 .

[10]  A. R. Rosenfield,et al.  Mixed-Mode Fracture of Ceramics in Diametral Compression , 1986 .

[11]  D. P. Rooke,et al.  The stress intensity factors of a radial crack in a point loaded disc , 1973 .

[12]  J. F. Beech,et al.  A Short-Rod Based System for Fracture Toughness Testing of Rock , 1984 .

[13]  Shaoquan Kou,et al.  More accurate stress intensity factor derived by finite element analysis for the ISRM suggested rock fracture toughness specimen: CCNBD , 2003 .

[14]  R. J. Fowell,et al.  Suggested method for determining mode I fracture toughness using Cracked Chevron Notched Brazilian Disc (CCNBD) specimens , 1995 .

[15]  A. R. Rosenfield,et al.  Mixed-mode fracture in biaxial stress state: Application of the diametral-compression (Brazilian disk) test , 1987 .

[16]  K. Gandhi.  Analysis of an inclined crack centrally placed in an orthotropic rectangular plate , 1972 .

[17]  R. Alley,et al.  Finite element analysis of the modified ring test for determining mode I fracture toughness , 1996 .

[18]  E. Pan,et al.  A general Boundary Element Analysis of 2-D Linear Elastic Fracture Mechanics , 1997 .

[19]  Ernian Pan,et al.  Fracture Mechanics Analysis of Cracked Discs of Anisotropic Rock Using the Boundary Element Method , 1998 .

[20]  A. R. Rosenfield,et al.  Fracture Toughness of Ceramics Measured by a Chevron‐Notch Diametral‐Compression Test , 1985 .

[21]  Yang Wang,et al.  Stress intensity factors for central cracked circular disk subjected to compression , 2004 .

[22]  H. Awaji,et al.  Combined Mode Fracture Toughness Measurement by the Disk Test , 1978 .

[23]  K. Chong,et al.  Fracture Toughness Determination of Rocks with Core-Based Specimens , 1989 .

[24]  Zongqi Sun,et al.  Fracture toughness of stripa granite cores , 1986 .

[25]  L. C. Schmidt,et al.  Rock fracture-toughness determination by the Brazilian test , 1993 .

[26]  Ove Stephansson,et al.  Effect of loading rate on Mode I fracture toughness, roughness and micromechanics of sandstone , 2003 .

[27]  G. Sih.  Strain-energy-density factor applied to mixed mode crack problems , 1974 .

[28]  E. Dill,et al.  Theory of Elasticity of an Anisotropic Elastic Body , 1964 .

[29]  G. Swan,et al.  Sub-Critical Crack Growth In Stripa Granite: Direct Observations , 1982 .

[30]  F. Erdogan,et al.  On the Crack Extension in Plates Under Plane Loading and Transverse Shear , 1963 .

[31]  T. Ramamurthy,et al.  A comparative evaluation of rock strength measures: Discussion of paper by K. L. Gunsallus and F. H. Kulhawy, Int. J. Rock Mech. Min. Sci. & Geomech. Abstr.21, 233–248 (1984) , 1987 .

[32]  Musharraf Zaman,et al.  Fracture toughness of a soft sandstone , 1998 .

[33]  M. H. Aliabadi,et al.  Fracture mechanics analysis of anisotropic plates by the boundary element method , 1993 .

[34]  R. A. Bearman,et al.  The use of the point load test for the rapid estimation of Mode I fracture toughness , 1999 .

[35]  I. L. Lim,et al.  Fracture testing of a soft rock with semi-circular specimens under three-point bending. Part 2—mixed-mode , 1994 .

[36]  Miguel Cerrolaza,et al.  A bi‐cubic transformation for the numerical evaluation of the Cauchy principal value integrals in boundary methods , 1989 .

[37]  C. Atkinson,et al.  Combined mode fracture via the cracked Brazilian disk test , 1982, International Journal of Fracture.

[38]  W. Knauss,et al.  Propagation of a crack under general, in-plane tension , 1972 .

[39]  P. C. Paris,et al.  On cracks in rectilinearly anisotropic bodies , 1965 .

[40]  G. Irwin.  ANALYSIS OF STRESS AND STRAINS NEAR THE END OF A CRACK TRAVERSING A PLATE , 1957 .

[41]  Yukitaka Murakami.  A simple procedure for the accurate determination of stress intensity factors by finite element method , 1976 .

[42]  P. Sollero,et al.  Anisotropic analysis of cracks in composite laminates using the dual boundary element method , 1995 .

[43]  Zhigang Suo,et al.  Singularities, interfaces and cracks in dissimilar anisotropic media , 1990, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[44]  F. Kulhawy,et al.  A comparative evaluation of rock strength measures , 1984 .

[45]  Finn Ouchterlony,et al.  Suggested methods for determining the fracture toughness of rock , 1988 .

[46]  Jh Underwood,et al.  Chevron-Notched Specimens: Testing and Stress Analysis , 1984 .