A stand-alone photovoltaic supercapacitor battery hybrid energy storage system

Most of the stand-alone photovoltaic (PV) systems require an energy storage buffer to supply continuous energy to the load when there is inadequate solar irradiation. Typically, Valve Regulated Lead Acid (VRLA) batteries are utilized for this application. However, supplying a large burst of current, such as motor startup, from the battery degrades battery plates, resulting in destruction of the battery. An alterative way of supplying large bursts of current is to combine VRLA batteries and supercapacitors to form a hybrid storage system, where the battery can supply continuous energy and the supercapacitor can supply the instant power to the load. In this paper, the role of the supercapacitor in a PV energy control unit (ECU) is investigated by using Matlab/Simulink models. The ECU monitors and optimizes the power flow from the PV to the battery-supercapacitor hybrid and the load. Three different load conditions are studied, including a peak current load, pulsating current load and a constant current load. The simulation results show that the hybrid storage system can achieve higher specific power than the battery storage system.

[1]  B. Conway.  Electrochemical Supercapacitors: Scientific Fundamentals and Technological Applications , 1999 .

[2]  S. Armstrong,et al.  Comparison of battery charging algorithms for stand alone photovoltaic systems , 2008, 2008 IEEE Power Electronics Specialists Conference.

[3]  M. Ceraolo,et al.  New dynamical models of lead-acid batteries , 2000 .

[4]  Ralph E. White,et al.  Power and life extension of battery-ultracapacitor hybrids , 2002 .

[5]  Chunbo Zhu,et al.  State-of-Charge Determination From EMF Voltage Estimation: Using Impedance, Terminal Voltage, and Current for Lead-Acid and Lithium-Ion Batteries , 2007, IEEE Transactions on Industrial Electronics.

[6]  Robyn A. Jackey,et al.  A Simple, Effective Lead-Acid Battery Modeling Process for Electrical System Component Selection , 2007 .

[7]  W. G. Hurley,et al.  An Improved Battery Characterization Method Using a Two-Pulse Load Test , 2008, IEEE Transactions on Energy Conversion.

[8]  Yousuke Nozaki,et al.  Ni-MH batteries and EDLCs hybrid stand-alone photovoltaic power system for digital access equipment , 2000, INTELEC. Twenty-Second International Telecommunications Energy Conference (Cat. No.00CH37131).

[9]  James P. Dunlop,et al.  RECOMMENDATIONS FOR MAXIMIZING BATTERY LIFE IN PHOTOVOLTAIC SYSTEMS: A REVIEW OF LESSONS LEARNED , 2001 .

[10]  Syed Islam,et al.  A battery management system for stand alone photovoltaic energy systems , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[11]  Geoffrey R. Walker,et al.  Evaluating MPPT Converter Topologies Using a Matlab PV Model , 2000 .

[12]  R.A. Dougal,et al.  Power enhancement of an actively controlled battery/ultracapacitor hybrid , 2005, IEEE Transactions on Power Electronics.

[13]  R. Mark Nelms,et al.  Classical equivalent circuit parameters for a double-layer capacitor , 2000, IEEE Trans. Aerosp. Electron. Syst..

[14]  A. Burke.  Ultracapacitors: why, how, and where is the technology , 2000 .

[15]  Shengyi Liu,et al.  Design of autonomous photovoltaic power plant for telecommunication relay station , 2005 .

[16]  S. Barsali,et al.  Dynamical Models of Lead-Acid Batteries: Implementation Issues , 2002, IEEE Power Engineering Review.