VHCF response of Gaussian SLM AlSi10Mg specimens: Effect of a stress relief heat treatment

[1]  Y. Murakami.  Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions , 2002 .

[2]  Paul C. Paris,et al.  Gigacycle fatigue in mechanical practice , 2004 .

[3]  Y. Furuya.  Notable size effects on very high cycle fatigue properties of high-strength steel , 2011 .

[4]  E. Brandl,et al.  Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior , 2012 .

[5]  G. Chiandussi,et al.  Comparison between dog-bone and Gaussian specimens for size effect evaluation in gigacycle fatigue , 2013 .

[7]  G. Chiandussi,et al.  On specimen design for size effect evaluation in ultrasonic gigacycle fatigue testing , 2014 .

[8]  Flaviana Calignano,et al.  Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting , 2014 .

[9]  F. Walther,et al.  Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting , 2015 .

[10]  J.-P. Kruth,et al.  Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation , 2015 .

[11]  Yukitaka Murakami,et al.  Dominant factors for very-high-cycle fatigue of high-strength steels and a new design method for components , 2015 .

[12]  G. Chiandussi,et al.  VHCF Response of AISI H13 Steel: assessment of Size Effects through Gaussian Specimens , 2015 .

[13]  Zhaohui Huang,et al.  A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility , 2015 .

[14]  F. Walther,et al.  Fatigue Performance of Laser Additive Manufactured Ti–6Al–4V in Very High Cycle Fatigue Regime up to 109 Cycles , 2015, Front. Mater..

[15]  G. Chiandussi,et al.  S-N curves in the very-high-cycle fatigue regime: Statistical modeling based on the hydrogen embrittlement consideration , 2016 .

[16]  I. Ashcroft,et al.  The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment , 2016 .

[17]  R. Hague,et al.  Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography , 2016 .

[19]  T. Mower,et al.  Mechanical behavior of additive manufactured, powder-bed laser-fused materials , 2016 .

[20]  Ian A. Ashcroft,et al.  Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality , 2016 .

[21]  G. Chiandussi,et al.  VHCF strength decrement in large H13 steel specimens subjected to ESR process , 2016 .

[22]  Y. Murakami,et al.  Defect Analysis and Fatigue Design Basis for Ni-based Superalloy 718 manufactured by Additive Manufacturing , 2017 .

[23]  T. Niendorf,et al.  Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime , 2017 .

[24]  A. Tridello.  VHCF response of Gaussian specimens made of high-strength steels:comparison between unrefined and refined AISI H13 , 2017 .

[25]  C. Biffi,et al.  Microstructure and preliminary fatigue analysis on AlSi10Mg samples manufactured by SLM , 2017 .

[26]  Stefano Beretta,et al.  Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength , 2017 .

[27]  F. Walther,et al.  Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy , 2017 .

[28]  S. Beretta,et al.  A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes , 2017 .

[29]  N. Uzan,et al.  Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM) , 2017 .

[30]  G. Chiandussi,et al.  Effect of electroslag remelting on the VHCF response of an AISI H13 steel , 2017 .

[31]  Carlo Alberto Biffi,et al.  Low temperature annealing dedicated to AlSi10Mg selective laser melting products , 2017 .

[32]  G. Chiandussi,et al.  An innovative testing technique for assessing the VHCF response of adhesively bonded joints , 2018, Fatigue & Fracture of Engineering Materials & Structures.

[33]  P. Rometsch,et al.  Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting , 2018, Materials & Design.

[34]  C. Biffi,et al.  VHCF response of as-built SLM AlSi10Mg specimens with large loaded volume , 2018 .

[35]  Annalisa Pola,et al.  Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy , 2019 .

[36]  Bo Song,et al.  A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends , 2019, Journal of Materials Science & Technology.