Electro-Thermal Model of Threshold Switching in TaOx-Based Devices.

Pulsed and quasi-static current-voltage (I-V) characteristics of threshold switching in TiN/TaOx/TiN crossbar devices were measured as a function of stage temperature (200-495 K) and oxygen flow during the deposition of TaOx. A comparison of the pulsed and quasi-static characteristics in the high resistance part of the I-V revealed that Joule self-heating significantly affected the current and was a likely source of negative differential resistance (NDR) and thermal runaway. The experimental quasi-static I-V's were simulated using a finite element electro-thermal model that coupled current and heat flow and incorporated an external circuit with an appropriate load resistor. The simulation reproduced the experimental I-V including the OFF-state at low currents and the volatile NDR region. In the NDR region, the simulation predicted spontaneous current constriction forming a small-diameter hot conducting filament with a radius of 250 nm in a 6 μm diameter device.

[1]  Daniele Ielmini,et al.  Threshold switching mechanism by high-field energy gain in the hopping transport of chalcogenide glasses , 2008 .

[2]  Electro‐thermal theory of the switching and memory effects in chalcogenide glassy semiconductors , 2009 .

[3]  A. Pergament,et al.  Electroforming and Switching in Oxides of Transition Metals: The Role of Metal-Insulator Transition in the Switching Mechanism , 1996 .

[4]  Victor G. Karpov,et al.  Field-induced nucleation in phase change memory , 2008 .

[5]  A. Reisman,et al.  Electrical properties of amorphous tantalum pentoxide thin films on silicon , 1983 .

[6]  S. Jo,et al.  3D-stackable crossbar resistive memory based on Field Assisted Superlinear Threshold (FAST) selector , 2014, 2014 IEEE International Electron Devices Meeting.

[7]  T. Tseng,et al.  Conduction mechanisms in amorphous and crystalline Ta2O5 thin films , 1998 .

[8]  J. Bain,et al.  Electronic Instabilities Leading to Electroformation of Binary Metal Oxide‐based Resistive Switches , 2014 .

[9]  Guido Groeseneken,et al.  Selector design considerations and requirements for 1 SIR RRAM crossbar array , 2014, 2014 IEEE 6th International Memory Workshop (IMW).

[10]  Xiaonan Chen,et al.  Voltage-Triggered Ultrafast Phase Transition in Vanadium Dioxide Switches , 2013, IEEE Electron Device Letters.

[11]  Rainer Waser,et al.  Multidimensional Simulation of Threshold Switching in NbO2 Based on an Electric Field Triggered Thermal Runaway Model , 2016 .

[12]  D. Adler,et al.  Threshold Switching in Chalcogenide-Glass Thin Films , 1980 .

[13]  P. Young.  dc electrical conduction in thin Ta2O5 films. I. Bulk‐limited conduction , 1976 .

[14]  D. Whitmore,et al.  Electrical conductivity and thermoelectric power of niobium dioxide , 1966 .

[15]  Hyunsang Hwang,et al.  Threshold Selector With High Selectivity and Steep Slope for Cross-Point Memory Array , 2015, IEEE Electron Device Letters.

[16]  Nonlinear Current—Voltage Characteristics of Ta2O5 and Nb2O5 Amorphous Oxides , 1990 .

[17]  Kuk-Hwan Kim,et al.  Crossbar RRAM Arrays: Selector Device Requirements During Read Operation , 2014, IEEE Transactions on Electron Devices.

[18]  Jiantao Zhou,et al.  Crossbar RRAM Arrays: Selector Device Requirements During Write Operation , 2014, IEEE Transactions on Electron Devices.

[19]  Ivan K Schuller,et al.  Role of thermal heating on the voltage induced insulator-metal transition in VO2. , 2013, Physical review letters.

[20]  I. Nishida,et al.  Study of Phase Transition in NbO2 , 1967, April 1.

[21]  H. Frisch,et al.  CVD of Tantalum Oxide Dielectric Thin Films for Nanoscale Device Applications , 2004 .

[22]  W. Lau,et al.  Characterization of Defect States Responsible for Leakage Current in Tantalum Pentoxide Films for Very-High-Density Dynamic Random Access Memory (DRAM) Applications , 1995 .

[23]  Suman Datta,et al.  Joule Heating-Induced Metal-Insulator Transition in Epitaxial VO2/TiO2 Devices. , 2016, ACS applied materials & interfaces.

[24]  Ronald Tetzlaff,et al.  Physical model of threshold switching in NbO2 based memristors , 2015 .

[25]  W. K. Choi,et al.  Analysis of the variation in the field‐dependent behavior of thermally oxidized tantalum oxide films , 1994 .

[26]  Jonathan M. Goodwill,et al.  Low temperature electroformation of TaOx-based resistive switching devices , 2016 .

[27]  Charles T Rettner,et al.  Subnanosecond incubation times for electric-field-induced metallization of a correlated electron oxide. , 2014, Nature nanotechnology.

[28]  J. Lee,et al.  Leakage currents in amorphous Ta2O5 thin films , 1997 .

[29]  D. Hughes,et al.  Electrical conduction in reactively sputtered tantalum oxide thin films , 1974 .

[30]  R. Stanley Williams,et al.  An accurate locally active memristor model for S-type negative differential resistance in NbOx , 2016 .

[31]  James A. Bain,et al.  Dynamics of electroforming in binary metal oxide-based resistive switching memory , 2015 .

[32]  James A. Bain,et al.  Mechanism of localized electrical conduction at the onset of electroforming in TiO2 based resistive switching devices , 2014 .

[33]  R Stanley Williams,et al.  Sub-100 fJ and sub-nanosecond thermally driven threshold switching in niobium oxide crosspoint nanodevices , 2012, Nanotechnology.

[34]  J. Bain,et al.  High-speed in-situ pulsed thermometry in oxide RRAMs , 2014, Proceedings of Technical Program - 2014 International Symposium on VLSI Technology, Systems and Application (VLSI-TSA).

[35]  B. Ridley,et al.  Specific Negative Resistance in Solids , 1963 .

[36]  Daniel Krebs,et al.  Evidence for thermally assisted threshold switching behavior in nanoscale phase-change memory cells , 2016 .

[37]  S. Blonkowski,et al.  Investigation and modeling of the electrical properties of metal–oxide–metal structures formed from chemical vapor deposited Ta2O5 films , 2001 .

[38]  Alexander Pergament,et al.  Electrical switching and Mott transition in VO2 , 2000 .

[39]  Shimeng Yu,et al.  Metal–Oxide RRAM , 2012, Proceedings of the IEEE.

[40]  D. Jeong,et al.  Nanofilamentary resistive switching in binary oxide system; a review on the present status and outlook , 2011, Nanotechnology.

[41]  E. J. Rymaszewski,et al.  Dielectric constant dependence of Poole-Frenkel potential in tantalum oxide thin films , 1994 .

[42]  H. Hwang,et al.  TiO2-based metal-insulator-metal selection device for bipolar resistive random access memory cross-point application , 2011 .

[43]  Elena Atanassova,et al.  Electrical characteristics of Ta2O5 based capacitors with different gate electrodes , 2006 .

[44]  Malgorzata Jurczak,et al.  Transient Thermometry and High-Resolution Transmission Electron Microscopy Analysis of Filamentary Resistive Switches. , 2016, ACS applied materials & interfaces.

[45]  J. L. Hartke.  The Three‐Dimensional Poole‐Frenkel Effect , 1968 .

[46]  Sir Nevill Mott,et al.  The mechanism of threshold switching in amorphous alloys , 1978 .

[47]  James A. Bain,et al.  Transient characterization of the electroforming process in TiO2 based resistive switching devices , 2013 .

[48]  G. Oehrlein.  Oxidation temperature dependence of the dc electrical conduction characteristics and dielectric strength of thin Ta2O5 films on silicon , 1986 .