Metamodel-assisted design optimization of piezoelectric flex transducer for maximal bio-kinetic energy conversion

Energy-harvesting devices have been widely used to generate electrical power from the bio-kinetic energy of human body movement. A novel piezoelectric flex transducer based on the Cymbal device has been proposed by other researchers for the purpose of energy harvesting. To further improve the efficiency of the device, optimal design of the piezoelectric flex transducer for maximum output power subject to stress and displacement constraints is carried out in this article. Sequential quadratic programming on metamodels generated with genetic programming from a 140-point optimal Latin hypercube design of experiments is used in the optimization. Finally, the optimal design is validated by finite element simulations. The simulations show that the magnitude of the electrical power generated from this optimal piezoelectric flex transducer harvesting device can be up to 6.5 MW when a safety design factor of 2.0 is applied.

[1]  Riccardo Poli,et al.  A Field Guide to Genetic Programming , 2008 .

[2]  Bill J. Van Heyst,et al.  A comprehensive review on vibration based micro power generators using electromagnetic and piezoelectric transducer mechanisms , 2015 .

[3]  Hoon Sohn,et al.  A review of structural health monitoring literature 1996-2001 , 2002 .

[4]  Adnan Harb,et al.  Energy harvesting: State-of-the-art , 2011 .

[5]  M. Kumar,et al.  Piezoelectric Vibration Harvesters Based on Vibrations of Cantilevered Bimorphs: A Review , 2015 .

[6]  Rajeev J. Ram,et al.  Thin Thermoelectric Generator System for Body Energy Harvesting , 2011, Journal of Electronic Materials.

[7]  Emílio Carlos Nelli Silva,et al.  Topology optimization of smart structures: design of piezoelectric plate and shell actuators , 2005 .

[8]  岡田 広毅.  Portable communication devices, vehicle-side communication apparatus and communication system , 2007 .

[9]  Hyeoungwoo Kim,et al.  Consideration of Impedance Matching Techniques for Efficient Piezoelectric Energy Harvesting , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[10]  M. J. D. Powell,et al.  A fast algorithm for nonlinearly constrained optimization calculations , 1978 .

[11]  G. Clark,et al.  Reference , 2008 .

[12]  Chao Lu,et al.  Vibration Energy Scavenging System With Maximum Power Tracking for Micropower Applications , 2011, IEEE Transactions on Very Large Scale Integration (VLSI) Systems.

[13]  Senlin Jiang,et al.  On the optimization of piezoelectric vibration energy harvester , 2015 .

[14]  R. Lerch,et al.  Simulation of piezoelectric devices by two- and three-dimensional finite elements , 1990, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[15]  Ashutosh Tiwari,et al.  Design, analysis and testing of a piezoelectric flex transducer for harvesting bio-kinetic energy , 2013 .

[16]  Jaehwan Kim,et al.  A review of piezoelectric energy harvesting based on vibration , 2011 .

[17]  Umberto Armani,et al.  Development of a hybrid genetic programming technique for computationally expensive optimisation problems , 2014 .

[18]  Lihua Tang,et al.  Synchronized charge extraction in galloping piezoelectric energy harvesting , 2016 .

[19]  Andy J. Keane,et al.  Engineering Design via Surrogate Modelling - A Practical Guide , 2008 .

[20]  Daniel J. Inman,et al.  Design and modeling of a flexible longitudinal zigzag structure for enhanced vibration energy harvesting , 2017 .

[21]  John R. Koza,et al.  Genetic programming - on the programming of computers by means of natural selection , 1993, Complex adaptive systems.

[22]  Chuan Tian,et al.  Energy harvesting from low frequency applications using piezoelectric materials , 2014 .

[23]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[24]  Emílio Carlos Nelli Silva,et al.  Optimal design of laminated piezocomposite energy harvesting devices considering stress constraints , 2016 .

[25]  Noboru Kikuchi,et al.  Design of piezoelectric transducers using topology optimization , 1999 .

[26]  J. Zhang,et al.  Cymbal transducers: a review , 2000, ISAF 2000. Proceedings of the 2000 12th IEEE International Symposium on Applications of Ferroelectrics (IEEE Cat. No.00CH37076).

[27]  J. Box.  R.A. Fisher and the Design of Experiments, 1922–1926 , 1980 .

[28]  Mohamed Sultan Mohamed Ali,et al.  Micro-scale energy harvesting devices: Review of methodological performances in the last decade , 2016 .