Development of a rehabilitation robot suit with velocity and torque-based mechanical safety devices

Safety is one of the most important issues in rehabilitation robot suits. We have proposed the structure of a rehabilitation robot suit equipped with two mechanical safety devices. The robot suit assists a patient's knee joint and the safety devices consist of only passive mechanical components without actuators, controllers, or batteries. We call one device the “velocity-based safety device” and the other the “torque-based safety device”. We expect a robot suit with the safety devices to be able to guarantee the safety even when the computer fails to operate functionally. In this paper, we begin by reviewing the characteristics of the safety devices and the structure of the rehabilitation robot suit equipped with the safety devices. Then we show a prototype robot suit developed based on the proposed structure. Finally, experimental results are demonstrated to verify the effectiveness of the safety devices in the prototype robot suit.

[1]  Robert Riener,et al.  Technology of the Robotic Gait Orthosis Lokomat , 2012 .

[2]  Song Han,et al.  Design of a network-based mobile gait rehabilitation system , 2012, 2012 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[3]  Junji Furusho,et al.  Development and experiments of actuator using MR fluid , 2000, 2000 26th Annual Conference of the IEEE Industrial Electronics Society. IECON 2000. 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation. 21st Century Technologies.

[4]  Sankai Yoshiyuki,et al.  Substitution of motor function of polio survivors who have permanent paralysis of limbs by using Cybernic Voluntary Control , 2009, 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[5]  M. Tomizuka,et al.  A Compact Rotary Series Elastic Actuator for Human Assistive Systems , 2012, IEEE/ASME Transactions on Mechatronics.

[6]  H. Kawamoto,et al.  Power assist method for HAL-3 using EMG-based feedback controller , 2003, SMC'03 Conference Proceedings. 2003 IEEE International Conference on Systems, Man and Cybernetics. Conference Theme - System Security and Assurance (Cat. No.03CH37483).

[7]  Baoyuan Wu,et al.  A PAWL for Enhancing Strength and Endurance during Walking Using Interaction Force and Dynamical Information , 2006, 2006 IEEE International Conference on Robotics and Biomimetics.

[8]  Junji Furusho,et al.  Modeling and motion control of an actuator unit using ER clutches , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[9]  Masayoshi Tomizuka,et al.  Control algorithms for prevention of impacts in rehabilitation systems , 2011, 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

[10]  Philippe Poignet,et al.  Medically safe and sound [human-friendly robot dependability] , 2004, IEEE Robotics & Automation Magazine.

[11]  P. Beyl,et al.  The MACCEPA actuation system as torque actuator in the gait rehabilitation robot ALTACRO , 2010, 2010 3rd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics.

[12]  Yasuhisa Hasegawa,et al.  Intention-based walking support for paraplegia patient , 2005, 2005 IEEE International Conference on Systems, Man and Cybernetics.

[13]  Yasuhisa Hasegawa,et al.  Intention-based walking support for paraplegia patients with Robot Suit HAL , 2007, Adv. Robotics.

[14]  V. Dietz,et al.  Driven gait orthosis for improvement of locomotor training in paraplegic patients , 2001, Spinal Cord.

[15]  Yoshihiro Kai.  Development of a walking support robot with velocity-based mechanical safety devices , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.