Evaluation of fretting wear based on the frictional work and cyclic saturation concepts

It is time consuming or even impossible to simulate the whole process of fretting wear, since it always involves millions of cyclic loadings. This paper focuses on the modeling and evaluation method of fretting wear for the typical bridge type fretting test with a flat pad. The frictional work on the contact interface is chosen as the parameter to evaluate the fretting wear. To verify the fretting wear model, the predicted wear profile is compared with that obtained by the experimental results. Fretting wear always includes plastic deformations due to the edge stress singularity. The effect of cumulative plastic deformation is also taken into account in the wear model. The role of the coefficient of friction at the contact interface on the fretting wear has also been discussed.

[1]  Takao Hanawa,et al.  Effect of contact pressure on fretting fatigue of austenitic stainless steel , 2003 .

[2]  Sean B. Leen,et al.  The effect of slip regime on fretting wear-induced stress evolution , 2004 .

[3]  A. Kapoor A re-evaluation of the life to rupture of ductile metals by cyclic plastic strain , 1994 .

[4]  Siegfried Fouvry,et al.  An elastic–plastic shakedown analysis of fretting wear , 2001 .

[5]  Issam Doghri,et al.  Fully implicit integration and consistent tangent modulus in elasto‐plasticity , 1993 .

[6]  Y. Mutoh,et al.  Observations and Analysis of Relative Slip in Fretting Fatigue , 2003 .

[7]  Yoshiharu Mutoh,et al.  Fracture mechanics approach to fretting fatigue and problems to be solved , 2003 .

[8]  Siegfried Fouvry,et al.  An energy description of wear mechanisms and its applications to oscillating sliding contacts , 2003 .

[9]  Peter J. Blau,et al.  Fifty years of research on the wear of metals , 1997 .

[10]  Darrell F. Socie,et al.  Multiaxial Fatigue Damage Models , 1987 .

[11]  I. R. McColl,et al.  Finite element simulation and experimental validation of fretting wear , 2004 .

[12]  L. Johansson,et al.  Numerical Simulation of Contact Pressure Evolution in Fretting , 1994 .

[13]  C. Ruiz,et al.  An investigation of fatigue and fretting in a dovetail joint , 1984 .

[14]  Francis Franklin,et al.  Tribological layers and the wear of ductile materials , 2000 .

[15]  Siegfried Fouvry,et al.  Quantification of fretting damage , 1996 .

[16]  Mona Öqvist,et al.  Numerical simulations of mild wear using updated geometry with different step size approaches , 2001 .

[17]  A. Fatemi,et al.  A CRITICAL PLANE APPROACH TO MULTIAXIAL FATIGUE DAMAGE INCLUDING OUT‐OF‐PHASE LOADING , 1988 .

[18]  J. Archard Contact and Rubbing of Flat Surfaces , 1953 .

[19]  A. Kapoor Wear by plastic ratchetting , 1997 .