Multifunctional sol-gel coatings for protection of wood

Abstract Organic–inorganic hybrid sol-gel coatings derived from sols synthesized using two organically modified precursors were generated on wood specimens using dip and spray coating techniques. One of the sols was synthesized using methacryloxypropyltrimethoxysilane (MPTMS) and nanoscaled boehmite particles and the other was synthesized using dimethyldiethoxysilane (DMDEOS) and tetraethoxysilane (TEOS). The coatings were generated on the wood specimens by dipping into the sols for specific time periods and by using spray coating method. The coatings were cured at different temperatures for varying soaking times. The dipping times, curing temperature, and soaking times were varied between 24–96 h, 130–200°C and 1–5 h, respectively. The coated samples were characterized for their water contact angles, microstructure, and resistance to water uptake. The coatings derived from MPTMS+boehmite sol were seen to exhibit better performance than DMDEOS+TEOS sol by forming a good barrier on the wood surface, thereby providing superior resistance to water and weather. Dipping of wood into the sol was seen to provide better protection when compared to spray coating. Dipping into the MPTMS+boehmite sol for 24 h and curing at 130°C for 2 h were found to be the optimal processing parameters yielding the best properties.

[1]  Q. Ji,et al.  Thermal stability and flame-retardancy mechanism of poly(ethylene terephthalate)/boehmite nanocomposites , 2010 .

[2]  R. Basosi,et al.  Interpenetration of wood with NH2R-functionalized silica xerogels anchoring copper(II) for preservation purposes , 2011 .

[3]  I. Chung,et al.  Effects of dimethyldiethoxysilane addition on tetraethylorthosilicate sol-gel process , 1995 .

[4]  Barry Goodell,et al.  Wood Deterioration and Preservation: Advances in Our Changing World , 2003 .

[5]  B. Mahltig,et al.  Functionalising wood by nanosol application , 2008 .

[6]  H. Schmidt,et al.  UV curable hard coatings on plastics , 1999 .

[7]  H. E. Desch,et al.  Timber, its structure, properties, and utilisation , 1981 .

[8]  J. C. F. Walker,et al.  Primary Wood Processing , 1993, Springer Netherlands.

[9]  Helmut K. Schmidt,et al.  Principles of hydrolysis and condensation reaction of alkoxysilanes , 1984 .

[10]  J. Hunt,et al.  Improvement of water resistance and dimensional stability of wood through titanium dioxide coating , 2010 .

[11]  J. Acker,et al.  Preventive action of organosilicon treatments against disfigurement of wood under laboratory and outdoor conditions , 2009 .

[12]  Donavan Marney,et al.  Combined Fire Retardant and Wood Preservative Treatments for Outdoor Wood Applications – A Review of the Literature , 2008 .

[13]  M. Tshabalala.  Sol-Gel deposition of inorganic alkoxides on wood surfaces to enhance their durability under exposure to sunlight and moisture , 2005 .

[14]  L. Sung,et al.  Wood surface modification by in-situ sol-gel deposition of hybrid inorganic–organic thin films , 2007 .

[15]  B. Mahltig,et al.  Surface properties of sol–gel treated thermally modified wood , 2010 .

[16]  S. Jämsä,et al.  Effect of curing process on simulated antisoiling properties of sol–gel coating on pine sapwood , 2010 .

[17]  S. Amberg-schwab,et al.  Inorganic-Organic Polymers with Barrier Properties for Water Vapor, Oxygen and Flavors , 1998 .

[18]  C. Mai,et al.  Modification of wood with silicon compounds. Treatment systems based on organic silicon compounds — a review , 2004, Wood Science and Technology.

[19]  M. Noll,et al.  Material resistance of flame retarded wood-plastic composites against fire and fungal decay , 2012 .

[20]  M. Tshabalala,et al.  Accelerated weathering of wood surfaces coated with multifunctional alkoxysilanes by sol-gel deposition , 2003 .