Enriched methane production using solar energy: an assessment of plant performance

Abstract A novel hybrid plant for the production of a mixture of methane and hydrogen (17 vol%) from a steam-reforming reactor whose heat duty is supplied by a concentrating solar power (CSP) plant by means of a molten salt stream is here presented. It has been demonstrated in the literature that mixtures containing up to 17 vol% of hydrogen in a natural gas (NG) stream can be sent in the NG pipeline infrastructure and can supply NG–ICE propulsion systems reducing the GHG emissions and improving the engine efficiency. A rigorous two-dimensional model has been developed to investigate the behaviour of the steam-reforming reactor and the effects of some important operating conditions, such as the reactant mixture residence time, the steam-to-carbon ratio in the feedstock, the operating pressure and the inlet temperature. The final outcome of this work is the dimensioning of a solar enriched methane plant for the electricity and gas requirements of domestic users.

[1]  Bruce A. Finlayson,et al.  Heat transfer in packed beds—a reevaluation , 1977 .

[2]  Ulf Herrmann,et al.  Two-tank molten salt storage for parabolic trough solar power plants , 2004 .

[3]  Giovanni Pede,et al.  Experimental tests of blends of hydrogen and natural gas in light-duty vehicles , 2008 .

[4]  Rui Chen,et al.  A carbon monoxide PROX reactor for PEM fuel cell automotive application , 2001 .

[5]  T. W. Forest,et al.  Effect of hydrogen addition on the performance of methane-fueled vehicles. Part II: driving cycle simulations , 2001 .

[6]  Bernard P. A. Grandjean,et al.  Methane steam reforming in asymmetric Pd- and Pd-Ag/porous SS membrane reactors , 1994 .

[7]  Evangelos Tsotsas,et al.  Heat transfer in packed beds with fluid flow: remarks on the meaning and the calculation of a heat transfer coefficient at the wall , 1990 .

[8]  William D'haeseleer,et al.  The use of the natural-gas pipeline infrastructure for hydrogen transport in a changing market structure , 2007 .

[9]  Bhaskar D. Kulkarni,et al.  Estimation of Effective Transport Properties in Packed Bed Reactors , 1980 .

[10]  G. Froment,et al.  Methane steam reforming, methanation and water‐gas shift: I. Intrinsic kinetics , 1989 .

[11]  N. Kahraman,et al.  Internal combustion engines fueled by natural gas—hydrogen mixtures , 2004 .

[12]  E. Drioli,et al.  Theoretical and experimental analysis of methane steam reforming in a membrane reactor , 1999 .

[13]  T. W. Forest,et al.  Effect of hydrogen addition on the performance of methane-fueled vehicles. Part I: effect on S.I. engine performance , 2001 .

[14]  R. Hughes,et al.  A simulative comparison of dense and microporous membrane reactors for the steam reforming of methane , 1998 .

[15]  C. Winter,et al.  Solar Power Plants , 1991 .

[16]  Yu-Ming Lin,et al.  Effect of incipient removal of hydrogen through palladium membrane on the conversion of methane steam reforming: Experimental and modeling , 2003 .

[17]  Gilbert F. Froment,et al.  Heat transfer in packed beds , 1972 .

[18]  D. Kearney,et al.  Assessment of a Molten Salt Heat Transfer Fluid in a Parabolic Trough Solar Field , 2003 .

[19]  D. Mills.  Advances in solar thermal electricity technology , 2004 .

[20]  G. Froment,et al.  Methane steam reforming: II. Diffusional limitations and reactor simulation , 1989 .

[21]  J. Pacheco,et al.  DEVELOPMENT OF A MOLTEN-SALT THERMOCLINE THERMAL STORAGE SYSTEM FOR PARABOLIC TROUGH PLANTS , 2001 .