Experimental Analysis of Glass Drilling with Ultrashort Pulse Lasers

[1]  Guillaume Petite,et al.  Dynamics of femtosecond laser interactions with dielectrics , 2004 .

[2]  Brent C. Stuart,et al.  Ultrashort-pulse laser machining of dielectric materials , 1999 .

[3]  M. Esashi,et al.  Deep reactive ion etching of Pyrex glass using SF6 plasma , 2001 .

[4]  T. Matsumura,et al.  Cutting process of glass with inclined ball end mill , 2008 .

[5]  Alan Arai,et al.  Waveguide writing in fused silica with a femtosecond fiber laser at 522 nm and 1 MHz repetition rate. , 2005, Optics express.

[6]  Fumiyo Yoshino,et al.  Heat accumulation effects in femtosecond laser-written waveguides with variable repetition rate. , 2005, Optics express.

[7]  H. E. Bennett,et al.  Relation between Surface Roughness and Specular Reflectance at Normal Incidence , 1961 .

[8]  Y. Bellouard,et al.  Fabrication of high-aspect ratio, micro-fluidic channels and tunnels using femtosecond laser pulses and chemical etching. , 2004, Optics express.

[9]  Urs Eppelt,et al.  Numerical analysis of laser ablation and damage in glass with multiple picosecond laser pulses. , 2013, Optics express.

[10]  Masaaki Sakakura,et al.  Temperature distribution and modification mechanism inside glass with heat accumulation during 250 kHz irradiation of femtosecond laser pulses , 2008 .

[11]  B. Luther-Davies,et al.  Ablation of solids by femtosecond lasers: ablation mechanism and ablation thresholds for metals and dielectrics , 2002 .

[12]  J. R. Vázquez de Aldana,et al.  Saturation of ablation channels micro-machined in fused silica with many femtosecond laser pulses. , 2006, Optics express.

[13]  Koji Sugioka,et al.  Rapid prototyping of three-dimensional microfluidic mixers in glass by femtosecond laser direct writing. , 2012, Lab on a chip.

[14]  Y. Shuto,et al.  Evaluation of high-temperature absorption coefficients of optical fibers , 2004, IEEE Photonics Technology Letters.

[15]  T. Choi,et al.  Liquid-assisted femtosecond laser drilling of straight and three-dimensional microchannels in glass , 2004 .

[16]  E. Mazur,et al.  Micromachining bulk glass by use of femtosecond laser pulses with nanojoule energy. , 2001, Optics letters.

[17]  E. Mazur,et al.  Femtosecond laser micromachining in transparent materials , 2008 .

[18]  Anjali V. Kulkarni,et al.  Electrochemical Spark Micromachining: Present Scenario , 2011, Int. J. Autom. Technol..

[19]  Urs Eppelt,et al.  Review on laser drilling I. Fundamentals, modeling, and simulation , 2013 .

[20]  Masaaki Sakakura,et al.  Observation of laser-induced stress waves and mechanism of structural changes inside rock-salt crystals. , 2011, Optics express.

[21]  A. Tünnermann,et al.  Femtosecond, picosecond and nanosecond laser ablation of solids , 1996 .

[22]  Andreas Kaiser,et al.  Microscopic processes in dielectrics under irradiation by subpicosecond laser pulses , 2000 .

[23]  P Balling,et al.  Femtosecond-laser ablation dynamics of dielectrics: basics and applications for thin films , 2013, Reports on progress in physics. Physical Society.

[24]  Gerard Mourou,et al.  SHORT-PULSE LASER DAMAGE IN TRANSPARENT MATERIALS AS A FUNCTION OF PULSE DURATION , 1999 .

[25]  Urs Eppelt,et al.  Diagnostic and simulation of ps-laser glass cutting , 2012 .

[26]  Rao Tummala,et al.  Through-package-via formation and metallization of glass interposers , 2010, 2010 Proceedings 60th Electronic Components and Technology Conference (ECTC).