Finite element and boundary element library for composites—a bibliography (1991–1993)

[1]  Y. Başar,et al.  On an isoparametric finite-element for composite laminates with finite rotations , 1993 .

[2]  Stefanos Vlachoutsis,et al.  Shear correction factors for plates and shells , 1992 .

[3]  Ever J. Barbero,et al.  A 3-D finite element for laminated composites with 2-D kinematic constraints , 1992 .

[4]  Tarun Kant,et al.  C0 Finite element geometrically non-linear analysis of fibre reinforced composite and sandwich laminates based on a higher-order theory , 1992 .

[5]  D. G. Liaw,et al.  Reliability of initially compressed uncertain laminated plates in supersonic flow , 1991 .

[6]  R. Pidaparti,et al.  Modeling and Fracture Prediction of Single Ply Cord-Rubber Composites , 1992 .

[7]  N. Ganesan,et al.  Vibration analysis of thick composite clamped conical shells of varying thickness , 1992 .

[8]  J. N. Reddy,et al.  On refined computational models of composite laminates , 1989 .

[9]  Y. Tseng,et al.  Global-Local Analysis of Composite Plates Using Partial Hybrid Plate Element , 1992 .

[10]  R. Byron Pipes,et al.  A finite element formulation for highly anisotropic incompressible elastic solids , 1992 .

[11]  Implementation of a lamina‐based constitutive relationship for analysing thick composites , 1992 .

[12]  L. Piancastelli,et al.  Some considerations on a four-node finite element for composites with the drilling degrees of freedom , 1992 .

[13]  A. K. Pandey,et al.  A first-ply failure analysis of composite laminates , 1987 .

[14]  J. N. Reddy,et al.  Modelling of thick composites using a layerwise laminate theory , 1993 .

[15]  Hiroyuki Kisu.  Boundary Element Analysis System Utilizing Data Base for G,H Matrices , 1991 .

[16]  J. N. Reddy.  A review of the literature on finite-element modeling of laminated composite plates , 1985 .

[17]  Ahmed K. Noor,et al.  Computational Models for High-Temperature Multilayered Composite Plates and Shells , 1992 .

[18]  R. Kapania,et al.  Vibrations of imperfect laminated panels under complex preloads , 1992 .

[19]  T. Kant,et al.  PSEUDO‐TRANSIENT LARGE‐DEFLECTION ELASTIC ANALYSIS OF FIBRE REINFORCED COMPOSITE PLATES , 1993 .

[20]  A. V. Krishna Murty,et al.  Analysis of edge delaminations in laminates through combined use of quasi-three-dimensional, eight-noded, two-noded and transition elements , 1991 .

[21]  B. Schrefler,et al.  Hierarchical multi-layered element of assembled Timoshenko beams , 1993 .

[22]  Y. Başar,et al.  Finite-rotation theories for composite laminates , 1993 .

[23]  Hsiao Ten-Lu.  A global-local finite element for general composite structure , 1991 .

[24]  C. Tan,et al.  Strength prediction of unidirectional composites with a circular hole using fracture mechanics , 1992 .

[25]  F. L. Matthews,et al.  A review of the strength of joints in fibre-reinforced plastics. Part 2. Adhesively bonded joints , 1982 .

[26]  J. Achenbach,et al.  Effect of Fiber-Matrix Interphase Defects on Microlevel Stress States at Neighboring Fibers , 1991 .

[27]  Henry T.Y. Yang,et al.  Elastic-Plastic Dynamic Response and Buckling of Laminated Thin Shells , 1991 .

[28]  T. K. Paul,et al.  Stress analysis of a thick fibre-reinforced plastic laminated square plate containing two elliptical holes under transverse uniform loading , 1992 .

[29]  J. R. Yeh.  The effect of interface on the transverse properties of composites , 1992 .

[30]  B. Moran,et al.  Effect of a viscoelastic interface on the transverse behavior of fiber-reinforced composites , 1991 .

[31]  Ch. Zhang.  Elastodynamic analysis of periodic antiplane cracks near and parallel to an interface , 1991 .

[32]  The Calculation of Energy Release Rates in Composite Laminates using the Boundary Element Method , 1991 .

[33]  E. Stein,et al.  A new finite element formulation for cylindrical shells of composite material , 1993 .

[34]  T. Kant,et al.  Large deflection inelastic pseudo-transient analysis of laminated composite plates , 1994 .

[35]  Suha Oral,et al.  A shear flexible finite element for nonuniform, laminated composite beams , 1991 .

[36]  P. Gudmundson,et al.  Kinked cracks in an anisotropic plane modeled by an integral equation method , 1991 .

[37]  S. Im.  Delamination Cracks Originating form Transverse Cracking in Cross-Ply Laminates under Various Loadings , 1991 .

[38]  A. Palazotto,et al.  Transverse shear flexibility in laminated plates undergoing large deflections , 1992 .

[39]  R. V. Dukkipati,et al.  Finite element analysis of multilayered shells of revolution , 1993 .

[40]  Tarun Kant,et al.  Non-linear dynamics of laminated plates with a higher-order theory and C0 finite elements , 1991 .

[41]  T. Y. Wu,et al.  A High Precision Higher Order Triangular Element For Free Vibration Of General Laminated Plates , 1993 .

[42]  Y. Tseng,et al.  Partial hybrid stress method applied to the higher-order laminated plates theory , 1991 .

[43]  A. Ghosh,et al.  A simple finite element for the analysis of laminated plates , 1992 .

[44]  P. Sinha,et al.  A Finite Element Analysis of Thermo-Structural Bending Behavior of Composite Plates , 1993 .

[45]  Karan S. Surana,et al.  Piecewise hierarchical p-version curved shell finite element for heat conduction in laminated composites , 1993 .

[46]  S. Ramakrishna,et al.  Dynamic analysis of laminates with elliptical cutouts using the hybrid-stress finite element , 1993 .

[47]  T. K. Paul,et al.  Finite element evaluation of stress concentration factor of thick laminated plates under transverse loading , 1993 .

[48]  Tarun Kant,et al.  Transient response of isotropic, orthotropic and anisotropic composite-sandwich shells with the superparametric element , 1992 .

[49]  Paolo Gaudenzi,et al.  A class of C0 finite elements for the static and dynamic analysis of laminated plates , 1992 .

[50]  T. K. Varadan,et al.  A higher-order theory for bending analysis of laminated shells of revolution , 1991 .

[51]  Jian Jun Lin,et al.  Nonlinear analysis of composite bridges by the finite element method , 1991 .

[52]  O. Jørgensen.  Ring-element analysis of layered orthotropic bodies , 1993 .

[53]  B. Peseux,et al.  Equivalent homogeneous finite element for composite materials via reissner principle. Part I: Finite element for plates , 1991 .

[54]  P. Sinha,et al.  Hygrothermal effects on the bending characteristics of laminated composite plates , 1991 .

[55]  Ganapathy Naganathan,et al.  Composite-shell finite element for the analysis of smart structures , 1993, Smart Structures.

[56]  K. R. Sivadas,et al.  Effect of coupling between symmetric and antisymmetric modes in composite thick shells of revolution , 1992 .

[57]  N. Banthia,et al.  A new three-dimensional interface (contact) element for fiber pull-out behavior in composites , 1992 .

[58]  Roger Ohayon,et al.  Explicit thickness integration for three‐dimensional shell elements applied to non‐linear analysis , 1993 .

[59]  Alexander Tessler,et al.  A Computationally viable higher‐order theory for laminated composite plates , 1991 .

[60]  K. Koo,et al.  VIBRATION AND DAMPING ANALYSIS OF COMPOSITE LAMINATES USING SHEAR DEFORMABLE FINITE-ELEMENT , 1993 .

[61]  Chien-Chang Lin,et al.  Stress and strength analysis of composite joints using direct boundary element method , 1993 .

[62]  Young W. Kwon,et al.  Material nonlinear analysis of composite plate bending using a new finite element formulation , 1991 .

[63]  Steven P. Wanthal,et al.  Three-Dimensional Finite Element Formulations for Laminated Plates , 1991 .

[64]  N. Bauld,et al.  Theoretical development and numerical verification of a geometrically non‐linear, 3‐D based finite element for composite materials , 1992 .

[65]  A. Jagota,et al.  Transverse fracture in laminated fiber-reinforced brittle matrix composites , 1993 .

[66]  N. Ganesan,et al.  Stresses in laminated composite annular disks subjected to a concentrated transverse edge load , 1993 .

[67]  Tarun Kant,et al.  New theories for symmetric/unsymmetric composite and sandwich beams with C0 finite elements , 1993 .

[68]  Karan S. Surana,et al.  Completely hierarchical p-version curved shell element for laminated composite plates and shells , 1991 .

[69]  C. Martin,et al.  A finite dynamic element for laminated composite plates and shells , 1991 .

[70]  R. Foye.  Finite element analysis of the stiffness of fabric reinforced composites , 1992 .

[71]  B. Liaw,et al.  Boundary element analysis of cracks at a fastener hole in an anisotropic sheet , 1991, International Journal of Fracture.

[72]  Interlaminar stresses around hole boundaries of composite laminates subjected to in-plane loading , 1993 .

[73]  A. Beris,et al.  3-D Simulation of Fiber-Fluid Interactions During Composite Manufacturing Using The Galerkin Boundary Element Method , 1992 .

[74]  George S. Springer,et al.  Stress analysis of thick, curved composite laminates , 1991 .

[75]  Jianhua Han,et al.  A three‐dimensional multilayer composite finite element for stress analysis of composite laminates , 1993 .

[76]  M. Touratier,et al.  A rectangular finite element for analysing composite multilayered shallow shells in statics, vibration and buckling , 1993 .

[77]  B. Sankar,et al.  A Plate Finite Element for Modeling Delaminations , 1993 .

[78]  Ahmed K. Noor,et al.  Assessment of Shear Deformation Theories for Multilayered Composite Plates , 1989 .

[79]  L. Shiau,et al.  Transverse shear effect on vibration of laminated plate using higher-order plate element , 1991 .

[80]  George J. Dvorak,et al.  A Review of Plasticity Theory of Fibrous Composite Materials , 1989 .

[81]  F. L. Matthews,et al.  A review of the strength of joints in fibre-reinforced plastics: Part 1. Mechanically fastened joints , 1980 .

[82]  Chang-Seon Hong,et al.  PAPERS : Three - Dimensional Finite Element Analysis of Interlaminar Stresses in Thick Composite Laminates , 1990 .

[83]  G. Venkateswara Rao,et al.  Thermal buckling of cross-ply composite laminates , 1992 .

[84]  In Lee,et al.  Supersonic flutter analysis of clamped symmetric composite panels using shear deformable finite elements , 1991 .

[85]  M. Bush.  An investigation of two-and three-dimensional models for predicting the elastic properties of particulate- and whisker-reinforced composite materials , 1992 .

[86]  Tarun Kant,et al.  A critical review and some results of recently developed refined theories of fiber-reinforced laminated composites and sandwiches , 1993 .

[87]  Biswajit Tripathy,et al.  Curved composite beams—optimum lay-up for buckling by ranking , 1991 .

[88]  Y. P. Tseng,et al.  A partial hybrid plate element formulation for free vibrations of laminated plates , 1993 .

[89]  M. Di Sciuva,et al.  A general quadrilateral multilayered plate element with continuous interlaminar stresses , 1993 .

[90]  K. Chandrashekhara.  Thermal buckling of laminated plates using a shear flexible finite element , 1992 .

[91]  J. Reddy.  Finite-element modeling of layered, anisotropic composite plates and shells: A review of recent research , 1981 .

[92]  J. N. Reddy,et al.  Survey of Recent Research in the Analysis of Composite Plates , 1982 .

[93]  Abhijit Mukherjee.  FREE VIBRATION OF LAMINATED PLATES USING A HIGH-ORDER ELEMENT , 1991 .

[94]  K. Surana,et al.  Piecewise hierarchical p-version axisymmetric shell element for laminated composites , 1993 .

[95]  Mark Bush,et al.  A boundary element analysis of metal matrix composite materials , 1993 .

[96]  Fernando Fraternali,et al.  A penalty model for the analysis of laminated composite shells , 1993 .

[97]  R. Liang,et al.  Simulations of nonlinear fracture process zone in cementitious material—a boundary element approach , 1991 .

[98]  Biswajit Tripathy,et al.  Stiffened composite cylindrical panels—Optimum lay-up for buckling by ranking , 1992 .

[99]  Stress concentration around holes in composite laminates with variable fiber spacing , 1993 .

[100]  Peter Wriggers,et al.  A nonlinear composite shell element with continuous interlaminar shear stresses , 1993 .

[101]  Anthony N. Palazotto,et al.  Comparison of eight variations of a higher-order theory for cylindrical shells , 1993 .

[102]  Tarun Kant,et al.  A general fibre-reinforced composite shell element based on a refined shear deformation theory , 1992 .

[103]  R. de Borst,et al.  Numerical Simulation of Free Edge Delamination in Graphite-Epoxy Laminates under Uniaxial Tension , 1991 .

[104]  Tarun Kant,et al.  Effect of cross‐sectional warping of anisotropic sandwich laminates due to dynamic loads using a refined theory and C° finite elements , 1992 .

[105]  Hwu Chyanbin,et al.  Green's functions of two-dimensional anisotropic plates containing an elliptic hole , 1991 .

[106]  A mixed finite element for interlaminar stress computation , 1992 .

[107]  J. N. Bandyopadhyay,et al.  Finite element analysis of laminated composite paraboloid of revolution shells , 1992 .

[108]  Kim Yujun,et al.  Delamination cracks originating from transverse cracking in cross-ply laminates under various loadings , 1993 .

[109]  Y. L. Gao,et al.  Boundary element analysis of plane anisotropic bodies with stress concentrations and cracks , 1992 .

[110]  Koganti M. Rao,et al.  Vibration analysis of FRP faced sandwich plates using hybrid-stress finite element method , 1991 .

[111]  CURVILINEAR COMPOSITE TRIANGULAR ELEMENT OF CLASS C , 1993 .

[112]  A. Shabana,et al.  Large reference displacement analysis of composite plates part I: Finite element formulation , 1993 .

[113]  Ahmed K. Noor,et al.  Mechanics of anisotropic plates and shells - A new look at an old subject , 1992 .

[114]  Ekkehard Ramm,et al.  Hybrid stress formulation for higher-order theory of laminated shell analysis , 1993 .

[115]  Tarun Kant,et al.  A Comparison of 9 and 16 Node Quadrilateral Elements Based on Higher-Order Laminate Theories for Estimation of Transverse Stresses , 1992 .

[116]  J. N. Reddy,et al.  On refined theories of composite laminates , 1990 .

[117]  R. Pidaparti,et al.  Supersonic flutter analysis of composite plates and shells , 1993 .

[118]  James C Young,et al.  The microdebonding testing system: A method of quantifying adhesion in real composites , 1991 .

[119]  Ozden O. Ochoa,et al.  Finite Element Analysis of Composite Laminates , 1992 .

[120]  Z. Zhong.  A bilinear shell element with the cross‐reduced integration technique , 1993 .

[121]  Y. Kwon.  Analysis of crack closure in unidirectional composite plates subject to bending loads , 1992 .

[122]  T. Kant,et al.  Large Deflection Elastic and Inelastic Transient Analyses of Composite and Sandwich Plates with a Refined Theory , 1993 .

[123]  A. Noor,et al.  Assessment of Computational Models for Multilayered Composite Shells , 1990 .

[124]  Pauli Pedersen,et al.  Analysis and sensitivity analysis by computer algebra for a third-order plate finite element , 1993 .

[125]  K. Chandrashekhara,et al.  Nonlinear vibration of moderately thick laminated beams using finite element methods , 1991 .

[127]  G. S. Palani,et al.  Finite Element Analysis of Thin‐Walled Curved Beams Made of Composites , 1992 .

[128]  K. R. Sivadas,et al.  Asymmetric vibration analysis of thick composite circular cylindrical shells with variable thickness , 1991 .

[129]  John T. Katsikadelis,et al.  Analysis of composite shear walls with interface separation, friction and slip using bem , 1993 .

[130]  On the problem of separation of physically nonlinear matrix from the inclusion using BEM , 1992 .

[131]  Liu Chorng-Fuh,et al.  A new finite element formulation for interlaminar stress analysis , 1993 .

[132]  K. Surana,et al.  p-Version piecewise hierarchical axisymmetric shell element for heat conduction in laminated composites , 1993 .

[133]  Henryk K Stolarski,et al.  Finite element analysis of composite plates using a weak form of the Kirchhoff constraints , 1993 .

[134]  B. Vidyashankar,et al.  Buckling of laminated plates containing delaminations , 1993 .

[135]  K. Surana,et al.  p-Version two-dimensional curved beam element using piecewise hierarchical approximation for laminated composites , 1993 .

[136]  D. Borst,et al.  A NON-LINEAR FINITE ELEMENT APPROACH FOR THE ANALYSIS OF MODE-I FREE EDGE DELAMINATION IN COMPOSITES , 1993 .

[137]  Ahmed K. Noor,et al.  Buckling and postbuckling analyses of laminated anisotropic structures , 1989 .

[138]  C. Liao,et al.  Elastic stability of skew laminated composite plates subjected to biaxial follower forces , 1993 .

[139]  R. Chella,et al.  Evaluation of fracture parameters of composites subjected to thermal shock using the boundary element method and sensitivity analysis techniques , 1993 .

[140]  L. Schwer,et al.  Verification of a general-purpose laminated composite shell element implementation: comparisons with analytical and experimental results , 1993 .

[141]  O. Griffin.  Evaluation of Finite-Element Software Packages for Stress Analysis of Laminated Composites , 1982 .

[142]  Y. K. Cheung,et al.  Analysis of laminated composite plates by hybrid stress isoparametric element , 1993 .

[143]  Zhi-Hua Zhong.  A cross‐reduced integration technique for a bilinear shell element without zero‐energy modes , 1991 .

[144]  Rakesh K. Kapania,et al.  A Review on the Analysis of Laminated Shells Virginia Polytechnic Institute and State University , 1989 .

[145]  K. Surana,et al.  Three-dimensional curved shell element based on completely hierarchical p-approximation for heat conduction in laminated composites , 1992 .

[146]  T. K. Varadan,et al.  Application of a field-consistent shear flexible element for nonlinear dynamic analysis of laminated shells , 1992 .

[147]  John Argyris,et al.  A natural triangular layered element for bending analysis of isotropic, sandwich, laminated composite and hybrid plates , 1993 .

[148]  R. Lammering,et al.  The application of a finite shell element for composites containing piezo-electric polymers in vibration control , 1991 .

[149]  Sunil N. Gulrajani,et al.  Sensitivities and optimal design of hexagonal array fiber composites with respect to interphase properties , 1993 .

[150]  Macromechanics Modelling of Steel Fiber Pull-Out from Cementitious Matrices , 1991 .

[151]  Yavuz Başar,et al.  Refined shear-deformation models for composite laminates with finite rotations , 1993 .

[153]  Raimund Rolfes,et al.  Higher order theory and finite element for heat conduction in composites. , 1991 .

[154]  Prodyot K. Basu,et al.  Higher‐order finite element modelling of laminated composite plates , 1994 .

[155]  A. Shirazi-Adl,et al.  A mixed finite element formulation for the stress analysis of composite structures , 1992 .

[156]  An improved numerical integration technique for boundary integral evaluation in anisotropic plate problems , 1992 .

[157]  B. Fallahi,et al.  Dynamic characterization of flexible slider-crank mechanisms made of laminated composites , 1993 .

[158]  Somnath Ghosh,et al.  A material based finite element analysis of heterogeneous media involving Dirichlet tessellations , 1993 .

[159]  Bhavani V. Sankar,et al.  A finite element for modeling delaminations in composite beams , 1991 .

[160]  P. K. Banerjee,et al.  Elastic analysis of three-dimensional solids with fiber inclusions by bem , 1992 .

[161]  K. Surana,et al.  Completely hierarchical p-version axisymmetric shell element for nonlinear heat conduction in laminated composites , 1993 .

[162]  V. Parthasarathy,et al.  Optimized/adapted finite elements for structural shape optimization , 1992 .

[163]  Tarun Kant,et al.  ESTIMATION OF INTERLAMINAR STRESSES IN FIBRE REINFORCED COMPOSITE CYLINDRICAL SHELLS , 1991 .

[164]  Victor N. Kaliakin,et al.  Pathologies associated with the numerical analysis of hyper‐anisotropic materials , 1993 .