On-Orbit Performance & Operation of the Attitude & Pointing Control Subsystems on ASTERIA

The Arcsecond Space Telescope Enabling Research in Astrophysics (ASTERIA) is a 6U CubeSat that was deployed from the International Space Station on 20 November 2017. The underlying goal of the mission is to image and perform photometry on bright, nearby stars and possibly detect transiting exoplanets orbiting these stars. As a technology demonstration with an eye to enable this science, the payload must be pointed with a stability of 5 arcseconds RMS over 20-minute observations and a repeatability of 1 arcsecond RMS across multiple observations. A two-stage control system was employed to achieve these pointing requirements: reaction wheels control the attitude of the spacecraft bus while a piezo stage translates the focal plane array to control the pointing of the payload. This paper will present on-orbit results that demonstrate a pointing stability of 0.5 arcsecond RMS over 20 minutes and a pointing repeatability of 1 milliarcsecond RMS from observation to observation, the best pointing of a CubeSat to date. In addition, this paper will discuss the pointing achieved by the attitude control subsystem alone, pointing issues due to temporarily bright pixels, hot pixels, and reaction wheel speed reversals or zero crossings, the deployment and Sun acquisition phase, momentum management issues arising from a large residual dipole, and some of the anomalies encountered with the attitude control subsystem.

[1]  Mark H. Milman,et al.  Instrument Pointing Capabilities: Past, Present, and Future , 2011 .

[2]  Sara Seager,et al.  ExoplanetSat: detecting transiting exoplanets using a low-cost CubeSat platform , 2010, Astronomical Telescopes + Instrumentation.

[3]  Jaymie M. Matthews,et al.  The MOST Microsatellite Mission: One Year In Orbit , 2004 .

[4]  Todd S. Rose,et al.  The NASA Optical Communications and Sensor Demonstration Program: Initial Flight Results , 2016 .

[5]  Thomas N. Woods,et al.  MinXSS-1 CubeSat On-Orbit Pointing and Power Performance: The First Flight of the Blue Canyon Technologies XACT 3-axis Attitude Determination and Control System , 2017, 1706.06967.

[6]  Gerald S. Nurre,et al.  Preservicing mission - On-orbit modifications to Hubble Space Telescope pointing control system , 1995 .

[7]  Sara Seager,et al.  On-Orbit Results and Lessons Learned from the ASTERIA Space Telescope Mission , 2018 .

[8]  Sara Seager,et al.  The ExoplanetSat Mission to Detect Transiting Exoplanets with a CubeSat Space Telescope , 2011 .

[9]  J. De Ridder,et al.  The PLATO Simulator: modelling of high-precision high-cadence space-based imaging , 2014, 1404.1886.

[10]  M. Auvergne,et al.  The CoRoT satellite in flight : description and performance , 2009, 0901.2206.

[11]  Joel Shields,et al.  Characterization of CubeSat Reaction Wheel Assemblies , 2017 .

[12]  Sara Seager,et al.  High-Precision Pointing and Attitude Determination and Control on ExoplanetSat , 2012 .

[13]  Peiman Maghami,et al.  Solar Dynamics Observatory On-orbit Jitter Testing, Analysis, and Mitigation Plans , 2011 .

[14]  David S. Bayard.  Advances in precision pointing control for the NASA Spitzer space telescope , 2004 .

[15]  Sara Seager,et al.  Achieving high-precision pointing on ExoplanetSat: initial feasibility analysis , 2010, Astronomical Telescopes + Instrumentation.

[16]  Christopher Masaru Pong,et al.  High-precision pointing and attitude estimation and control algorithms for hardware-constrained spacecraft , 2014 .

[17]  Mr. Christopher Pong.  EXOPLANETSAT: HIGH PRECISION PHOTOMETRY FOR EXOPLANET TRANSIT DETECTIONS IN A 3U CUBESAT , 2015 .

[18]  Cordell Grant,et al.  On-Orbit Performance of the Bright Target Explorer (BRITE) Nanosatellite Astronomy Constellation , 2014 .