Barriers to implementation of phase change materials within solar desalination units: Exergy, thermal conductivity, economic, and environmental aspects review
暂无分享,去创建一个
[1] Dr. Bhumika Das,et al. Investigating the energetic, exergetic, and sustainability aspects of a solar still integrating fins, wick, phase change materials, and external condenser , 2022, Journal of Energy Storage.
[2] S. M. Sadrameli,et al. Thermal Pyrolysis of Linseed Waste to Produce a Renewable Biofuel Using Response Surface Methodology in a Fixed Bed Reactor , 2022, Journal of Analytical and Applied Pyrolysis.
[3] M.S. Islam,et al. Investigation of a modified double slope solar still integrated with nanoparticle-mixed phase change materials: Energy, exergy, exergo-economic, environmental, and sustainability analyses , 2022, Case Studies in Thermal Engineering.
[4] R. Senthil,et al. Recent developments in nano-enhanced phase change materials for solar thermal storage , 2022, Solar Energy Materials and Solar Cells.
[5] O. Samuel,et al. An overview on energy and exergy analysis of solar thermal collectors with passive performance enhancers , 2022, Alexandria Engineering Journal.
[6] E. Johansson,et al. Enhancing the efficiency and stability of perovskite solar cells based on moisture-resistant dopant free hole transport materials by using a 2D-BA2PbI4 interfacial layer. , 2022, Physical Chemistry, Chemical Physics - PCCP.
[7] A. Tamilarasan,et al. Performance study on solar still using nano disbanded phase change material (NDPCM) , 2022, Materials Today: Proceedings.
[8] S. M. Sadrameli,et al. Preparation and characterization of high temperature shape stable NaNO3/diatomite phase change materials with nanoparticles for solar energy storage applications , 2022, Journal of Energy Storage.
[9] Ting Lu,et al. N-doped carbon@Cu core-shell nanostructure with nearly full solar spectrum absorption and enhanced solar evaporation efficiency , 2022, Journal of Materials Chemistry A.
[10] A. Sohani,et al. A conceptual optimum design for a high-efficiency solar-assisted desalination system based on economic, exergy, energy, and environmental (4E) criteria , 2022, Sustainable Energy Technologies and Assessments.
[11] J. Wendt,et al. Ash Aerosol and Deposit Formation from Combustion of Coal and Its Blend with Woody Biomass at Two Combustion Scales: Part 1─1.5 MWTH Pilot-Scale Combustor Tests , 2021, Energy & Fuels.
[12] S. M. Sadrameli,et al. Stability improvement of MAPbI3-based perovskite solar cells using a photoactive solid-solid phase change material , 2021, Journal of Alloys and Compounds.
[13] Naser A. Alsaleh,et al. Investigation and performance analysis of solar still with energy storage materials: An energy- exergy efficiency analysis , 2021, Case Studies in Thermal Engineering.
[14] S. M. Sadrameli,et al. Experimental investigation for the thermal management of a coaxial electrical cable system using a form-stable low temperature phase change material , 2021, Journal of Energy Storage.
[15] E. Asadi,et al. High-Pressure Vapor–Liquid Equilibrium Measurement of CO2 Solubility into Aqueous Solvents of (Diisopropylamine + L-Lysine) and (Diisopropylamine + Piperazine + L-Lysine) at Different Temperatures and Compositions , 2021, Journal of Chemical & Engineering Data.
[16] H. Kargarsharifabad,et al. Effects of nano-enhanced phase change material and nano-coated on the performance of solar stills , 2021 .
[17] H. Kargarsharifabad,et al. A comprehensive review of Enviro-Exergo-economic analysis of solar stills , 2021 .
[18] K. Sadasivuni,et al. Investigation on evacuated tubes coupled solar still with condenser and fins: Experimental, exergo-economic and exergo-environment analysis , 2021 .
[19] Yong‐Le Nian,et al. Study on annual performance of the solar still using shape-stabilized phase change materials with economic analysis , 2021 .
[20] Gamal B. Abdelaziz,et al. Performance enhancement of tubular solar still using nano-enhanced energy storage material integrated with v-corrugated aluminum basin, wick, and nanofluid , 2021 .
[21] A. Afzal,et al. Enhancing the solar still output using micro/nano-particles of aluminum oxide at different concentrations: An experimental study, energy, exergy and economic analysis , 2021 .
[22] Ali J. Chamkha,et al. Exergy and energy analysis of a tubular solar still with and without fins: a comparative theoretical and experimental approach , 2021, Environmental Science and Pollution Research.
[23] A. W. Kandeal,et al. Improved thermo-economic performance of solar desalination via copper chips, nanofluid, and nano-based phase change material , 2021, Solar Energy.
[24] Saeed Zeinali Heris,et al. Experimental investigation of stepped solar still with phase change material and external condenser , 2021 .
[25] Y. Sahli,et al. Energetic and exergetic analysis of a sloped solar still integrated with a separated heat storage system incorporating phase change material , 2021 .
[26] P. Davies,et al. Combined effects of composite thermal energy storage and magnetic field to enhance productivity in solar desalination , 2021 .
[27] Y. Yamauchi,et al. Solar-Powered Sustainable Water Production: State-of-the-Art Technologies for Sunlight-Energy-Water Nexus. , 2021, ACS nano.
[28] H. Panchal,et al. Augmenting the productivity of stepped distiller by corrugated and curved liners, CuO/paraffin wax, wick, and vapor suctioning , 2021, Environmental Science and Pollution Research.
[29] M. M. Younes,et al. Enhancing the wick solar still performance using half barrel and corrugated absorbers , 2021, Process Safety and Environmental Protection.
[30] A. Kabeel,et al. Improving the tubular solar still performance using square and circular hollow fins with phase change materials , 2021 .
[31] Sherif I. Rabia,et al. Fractional modeling for enhancing the thermal performance of conventional solar still using hybrid nanofluid: Energy and exergy analysis , 2021 .
[32] Subbarama Kousik Suraparaju,et al. Productivity enhancement of single-slope solar still with novel bottom finned absorber basin inserted in phase change material (PCM): techno-economic and enviro-economic analysis , 2021, Environmental Science and Pollution Research.
[33] Subbarama Kousik Suraparaju,et al. Experimental and economic analysis of energy storage‐based single‐slope solar still with hollow‐finned absorber basin , 2021, Heat Transfer.
[34] Muapper Alhadri,et al. Enhancing tubular solar still performance using novel PCM-tubes , 2021 .
[35] R. A. Beg,et al. Combined influence of fin, phase change material, wick, and external condenser on the thermal performance of a double slope solar still , 2021 .
[36] R. Sathyamurthy,et al. A comparative energy and exergy efficiency study of hemispherical and single-slope solar stills , 2021, Environmental Science and Pollution Research.
[37] P. Show,et al. A review on conventional and novel materials towards heavy metal adsorption in wastewater treatment application , 2021 .
[38] V. Lakhera,et al. Analysis of solar still integrated with phase change material and pin fins as absorbing material , 2021 .
[39] S. Surya,et al. Investigating a single slope solar still with a nano-phase change material , 2021 .
[40] G. Kumaresan,et al. Energy, Exergy, and Economic analysis of low thermal conductivity basin solar still integrated with Phase Change Material for energy storage , 2021 .
[41] Muhammad Wakil Shahzad,et al. Exergoeconomic optimization of a forward feed multi-effect desalination system with and without energy recovery , 2021 .
[42] Shiv Kumar,et al. Enviro-energy-exergo-economic analysis of ETC augmented double slope solar still with ‘N’ parallel tubes under forced mode: Environmental and economic feasibility , 2021 .
[43] A. S. Abdullah,et al. Enhancing Trays Solar Still Performance Using Wick Finned Absorber, Nano-Enhanced PCM , 2021, SSRN Electronic Journal.
[44] Rahul Agrawal,et al. A review on productivity enhancement of solar still by application of PCM and nano enhanced PCM , 2021 .
[45] H. Pahlavanzadeh,et al. Fabrication and optimization of kaolin/stearic acid composite as a form-stable phase change material for application in the thermal energy storage systems , 2021 .
[46] A. Kaviti,et al. A brief review on high-performance nano materials in solar desalination , 2021 .
[47] M. Shafii,et al. A novel energy storage system for latent heat recovery in solar still using phase change material and pulsating heat pipe , 2021 .
[48] Hossein Amiri,et al. Energy and exergy analysis of a new solar still composed of parabolic trough collector with built-in solar still , 2021 .
[49] H. Hassan,et al. An assessment of energy, exergy and CO2 emissions of a solar desalination system under hot climate conditions , 2021 .
[50] H. Hassan,et al. Energy, exergy and environmental assessment of solar still with solar panel enhanced by porous material and saline water preheating , 2020 .
[51] H. Moayedi,et al. A proper model to predict energy efficiency, exergy efficiency, and water productivity of a solar still via optimized neural network , 2020 .
[52] E. Asadi,et al. Experimental Measurement of Carbon Dioxide Solubility in Aqueous N-Methyldiethanolamine + 2-(2-Aminoethylamino) Ethanol + Sulfolane and Diethanolamine + 2-(2-Aminoethylamino) Ethanol + Sulfolane Hybrid Solvents at Various Temperatures and High Pressure , 2020 .
[53] J. V. Tirkey,et al. A comprehensive review of direct solar desalination techniques and its advancements , 2020 .
[54] M. Sharifpur,et al. Sustainable potable water production from conventional solar still during the winter season at Algerian dry areas: energy and exergy analysis , 2020, Journal of Thermal Analysis and Calorimetry.
[55] H. Hassan,et al. Energy payback time, exergoeconomic and enviroeconomic analyses of using thermal energy storage system with a solar desalination system: An experimental study , 2020 .
[56] M. Afrand,et al. First approach on nanofluid-based solar still in high altitude for water desalination and solar water disinfection (SODIS) , 2020 .
[57] E. Asadi,et al. High-pressure measurement and thermodynamic modeling of the carbon dioxide solubility in the aqueous 2-((2-aminoethyl)-amino)-ethanol + sulfolane system at different temperatures , 2020 .
[58] S. M. Sadrameli,et al. Optimization of energy consumption and temperature fluctuations for a household freezer using non‐toxic and non‐flammable eutectic phase change materials with a cascade arrangement , 2020, International Journal of Energy Research.
[59] Zhenjun Ma,et al. Performance amelioration of single basin solar still integrated with V- type concentrator: Energy, exergy, and economic analysis , 2020, Environmental Science and Pollution Research.
[60] Muhammad Zeeshan Malik,et al. Solar still desalination system equipped with paraffin as phase change material: exergoeconomic analysis and multi-objective optimization , 2020, Environmental Science and Pollution Research.
[61] Dhananjay R. Mishra,et al. Energy, exergy, and economic analysis of single slope conventional solar still augmented with an ultrasonic fogger and a cotton cloth , 2020 .
[62] H. Hassan,et al. Assessment of parabolic trough solar collector assisted solar still at various saline water mediums via energy, exergy, exergoeconomic, and enviroeconomic approaches , 2020, Renewable Energy.
[63] Francesco Calise,et al. Coupling electrodialysis desalination with photovoltaic and wind energy systems for energy storage: Dynamic simulations and control strategy , 2020 .
[64] R. Sathyamurthy,et al. A comparative study of 3E (energy, exergy, and economy) analysis of various solar stills , 2020, Heat Transfer.
[65] H. Hassan,et al. Energy, exergy, environmental, and economic analysis of natural and forced cooling of solar still with porous media , 2020, Environmental Science and Pollution Research.
[66] H. Hassan,et al. Impact of condenser heat transfer on energy and exergy performance of active single slope solar still under hot climate conditions , 2020 .
[67] Swellam W. Sharshir,et al. Performance enhancement of stepped double slope solar still by using nanoparticles and linen wicks: Energy, exergy and economic analysis , 2020 .
[68] M. Mohanraj,et al. Energy, exergy, economic and enviro-economic (4E) analysis of gravel coarse aggregate sensible heat storage-assisted single-slope solar still , 2020, Journal of Thermal Analysis and Calorimetry.
[69] H. Kargarsharifabad,et al. Application of simultaneous thermoelectric cooling and heating to improve the performance of a solar still: An experimental study and exergy analysis , 2020 .
[70] R. Sathyamurthy,et al. Experimental study on tubular solar still using Graphene Oxide Nano particles in Phase Change Material (NPCM's) for fresh water production , 2020 .
[71] A. Kabeel,et al. Augmentation of a developed tubular solar still productivity using hybrid storage medium and CPC: An experimental approach , 2020 .
[72] S. M. Sadrameli,et al. Prolonged Lifetime of Perovskite Solar Cells Using a Moisture-Blocked and Temperature-Controlled Encapsulation System Comprising a Phase Change Material as a Cooling Agent , 2020, ACS omega.
[73] S. Delfani,et al. Comparative study on the multistage solar still performance utilizing PCM in variable thicknesses , 2020, International Journal of Energy Research.
[74] A. Kabeel,et al. A comprehensive review of tubular solar still designs, performance, and economic analysis , 2020 .
[75] S. M. Sadrameli,et al. Preparation of Macro Encapsulated Phase Change Materials for High Temperature Energy Storage Applications , 2020 .
[76] F. Sarhaddi,et al. Exergy performance evaluation of a basin-type double-slope solar still equipped with phase-change material and PV/T collector , 2020 .
[77] S. M. Sadrameli,et al. Application of environmental friendly and eutectic phase change materials for the efficiency enhancement of household freezers , 2020 .
[78] R. Velraj,et al. Augmenting the productivity of solar still using multiple PCMs as heat energy storage , 2019 .
[79] S. Khanmohammadi,et al. Energy, exergy and exergo-environment analyses, and tri-objective optimization of a solar still desalination with different insulations , 2019, Energy.
[80] H. Hassan,et al. Energy, exergy, exergoeconomic and enviroeconomic (4E) evaluation of a new integration of solar still with photovoltaic panel , 2019, Journal of Cleaner Production.
[81] Gamal B. Abdelaziz,et al. Experimental investigation of a solar still with composite material heat storage: Energy, exergy and economic analysis , 2019, Journal of Cleaner Production.
[82] F. Hammad,et al. Applications of cascaded phase change materials in solar water collector storage tanks: A review , 2019, Solar Energy Materials and Solar Cells.
[83] L. Abdolmaleki,et al. Energy management of a household refrigerator using eutectic environmental friendly PCMs in a cascaded condition , 2019, Energy.
[84] R. Sathyamurthy,et al. Experimental studies on inclined PV panel solar still with cover cooling and PCM , 2019, Journal of Thermal Analysis and Calorimetry.
[85] S. M. Sadrameli,et al. High Power UV-Light Irradiation as a New Method for Defect Passivation in Degraded Perovskite Solar Cells to Recover and Enhance the Performance , 2019, Scientific Reports.
[86] I Chaer,et al. Solar Still Efficiency Enhancement by Using Graphene Oxide/Paraffin Nano-PCM , 2019, Energies.
[87] H. Hassan,et al. Experimental investigation on the impact of thermal energy storage on the solar still performance coupled with PV module via new integration , 2019, Solar Energy.
[88] S. Nazari,et al. Experimental and analytical investigations of productivity, energy and exergy efficiency of a single slope solar still enhanced with thermoelectric channel and nanofluid , 2019, Renewable Energy.
[89] H. Hassan,et al. Assessment of different passive solar stills via exergoeconomic, exergoenvironmental, and exergoenviroeconomic approaches: A comparative study , 2019, Solar Energy.
[90] Ravishankar Sathyamurthy,et al. A mini review of techniques used to improve the tubular solar still performance for solar water desalination , 2019, Process Safety and Environmental Protection.
[91] Yong‐Le Nian,et al. Performance of solar still using shape-stabilized PCM: Experimental and theoretical investigation , 2019, Desalination.
[92] E. El-Said,et al. Augmented heat and mass transfer effect on performance of a solar still using porous absorber: Experimental investigation and exergetic analysis , 2019, Applied Thermal Engineering.
[93] H. Hassan,et al. Energy, exergy, economic and enviroeconomic (4E) analyses of solar distillation system using different absorbing materials , 2019, Applied Thermal Engineering.
[94] Omar Bait. Exergy, environ–economic and economic analyses of a tubular solar water heater assisted solar still , 2019, Journal of Cleaner Production.
[95] H. Hassan,et al. An experimental study on the performance of single slope solar still integrated with a PCM-based pin-finned heat sink , 2019, Energy Procedia.
[96] H. Hassan,et al. Energetic and exergetic performance assessment of the inclusion of phase change materials (PCM) in a solar distillation system , 2019, Energy Conversion and Management.
[97] A. Kabeel,et al. Energy and exergy analysis of solar stills with micro/nano particles: A comparative study , 2018, Energy Conversion and Management.
[98] Rasool Kalbasi,et al. Improving performance of an inverted absorber multi-effect solar still by applying exergy analysis , 2018, Applied Thermal Engineering.
[99] Emad M.S. El-Said,et al. Comparative study based on thermal, exergetic and economic analyses of a tubular solar still with semi-circular corrugated absorber , 2018, Journal of Cleaner Production.
[100] Seyyed Morteza Javid,et al. A salt-rejecting floating solar still for low-cost desalination , 2018 .
[101] A. Kabeel,et al. Comparative study on the solar still performance utilizing different PCM , 2018 .
[102] J. A. Esfahani,et al. Enhancement of solar still by reticular porous media: Experimental investigation with exergy and economic analysis , 2018 .
[103] B. Janarthanan,et al. Productivity enhancement of solar still by PCM and Nanoparticles miscellaneous basin absorbing materials. , 2017 .
[104] S. Rashidi,et al. Exergy and economic analysis for a double slope solar still equipped by thermoelectric heating modules - an experimental investigation , 2017 .
[105] A. E. Kabeel,et al. Investigation of exergy and yield of a passive solar water desalination system with a parabolic concentrator incorporated with latent heat storage medium , 2017 .
[106] Mohammad Behshad Shafii,et al. Experimental investigation of a solar still equipped with an external heat storage system using phase change materials and heat pipes , 2017 .
[107] Ahmed A. Askalany,et al. Recycling brine water of reverse osmosis desalination employing adsorption desalination: A theoretical simulation , 2017 .
[108] Faramarz Sarhaddi,et al. Comparative study of two weir type cascade solar stills with and without PCM storage using energy and exergy analysis , 2017 .
[109] A. A. El-Sebaii,et al. An experimental investigation of a v-corrugated absorber single-basin solar still using PCM , 2016 .
[110] A. E. Kabeel,et al. Improving the performance of solar still by using PCM as a thermal storage medium under Egyptian conditions , 2016 .
[111] Nadia Zari,et al. Exergy analysis of solar desalination still combined with heat storage system using phase change material (PCM) , 2016 .
[112] F. F. Tabrizi,et al. Development of a macro-micro kinetic model for CO hydrogenation over Co–Ni catalyst , 2015, Kinetics and Catalysis.
[113] F. F. Tabrizi,et al. Thermodynamic analysis of steam reforming of methane with statistical approaches , 2015 .
[114] K. Kalidasa Murugavel,et al. Various special designs of single basin passive solar still – A review , 2015 .
[115] Ali E. Anqi,et al. Numerical simulation of brackish water desalination by a reverse osmosis membrane , 2015 .
[116] M. Eswaramoorthy,et al. Exergy analysis of the solar still integrated nano composite phase change materials , 2015 .
[117] M. Chaichan,et al. Using Aluminium Powder With PCM (paraffin wax) to Enhance Single Slope Solar Water Distillation Productivity in Baghdad –Iraq Winter Weathers , 2015 .
[118] Majed M. Alhazmy. Economic and thermal feasibility of multi stage flash desalination plant with brine–feed mixing and cooling , 2014 .
[119] Fazlollah Heshmatnezhad,et al. Comparison between energy and exergy efficiencies in a weir type cascade solar still , 2013 .
[120] T. AnfasMukram,et al. EXPERIMENTAL ANALYSIS OF ACTIVE SOLAR STILL WITH AIR PUMP AND EXTERNAL BOOSTING MIRRORS , 2013 .
[121] George M. Ayoub,et al. Developments in Solar Still Desalination Systems: A Critical Review , 2012 .
[122] Saeed Zeinali Heris,et al. Exergy and economic analysis of a pyramid-shaped solar water purification system: Active and passive cases , 2012 .
[123] K. Srithar,et al. Performance analysis in stepped solar still for effluent desalination , 2009 .
[124] Ahmed A. Al-Ghamdi,et al. Thermal performance of a single basin solar still with PCM as a storage medium , 2009 .
[125] K. Srithar,et al. SINGLE BASIN SOLAR STILL WITH FIN FOR ENHANCING PRODUCTIVITY , 2008 .