Pore-scale analysis of condensing solvent bitumen extraction

[1]  Jason Riordon,et al.  A combined method for pore-scale optical and thermal characterization of SAGD , 2016 .

[2]  Farshid Torabi,et al.  Micro-optical analysis of carbonated water injection in irregular and heterogeneous pore geometry , 2016 .

[3]  Josef Füssl,et al.  The bitumen microstructure: a fluorescent approach , 2016 .

[4]  Olena Babak.  A Discussion of the Importance of Particle Size Distribution Data for Characterizing Athabasca Oil Sands , 2015 .

[5]  Mark L Porter,et al.  Geo-material microfluidics at reservoir conditions for subsurface energy resource applications. , 2015, Lab on a chip.

[6]  A. Kovscek,et al.  Functionalization of micromodels with kaolinite for investigation of low salinity oil-recovery processes. , 2015, Lab on a chip.

[7]  Experience I Nduagu,et al.  Unconventional Heavy Oil Growth and Global Greenhouse Gas Emissions. , 2015, Environmental science & technology.

[8]  Ran Li.  Chemical Additives and Foam to Enhance SAGD Performance , 2015 .

[9]  E. Rogel,et al.  Physical and Numerical Simulations of Subsurface Upgrading using Solvent Deasphalting in a Heavy Crude Oil Reservoir , 2015 .

[10]  David Sinton,et al.  Chip-off-the-old-rock: the study of reservoir-relevant geological processes with real-rock micromodels. , 2014, Lab on a chip.

[11]  David Sinton,et al.  Pore-Scale Assessment of Nanoparticle-Stabilized CO2 Foam for Enhanced Oil Recovery , 2014 .

[12]  David Sinton,et al.  Energy: the microfluidic frontier. , 2014, Lab on a chip.

[13]  R Helmig,et al.  Simultaneous thermal and optical imaging of two-phase flow in a micro-model. , 2014, Lab on a chip.

[14]  Farshid Torabi,et al.  On the CO2 storage potential of cyclic CO2 injection process for enhanced oil recovery , 2014 .

[15]  I. D. Gates,et al.  An Ultra-low Emissions Enhanced Thermal Recovery Process for Oil Sands , 2014 .

[16]  Ian D. Gates,et al.  Energy efficiency and emissions intensity of SAGD , 2014 .

[17]  Yongan Gu,et al.  A new solvent-based enhanced heavy oil recovery method: Cyclic production with continuous solvent injection , 2014 .

[18]  David Sinton,et al.  Steam-on-a-chip for oil recovery: the role of alkaline additives in steam assisted gravity drainage. , 2013, Lab on a chip.

[19]  A. Kovscek,et al.  A Study of Microscale Gas Trapping Using Etched Silicon Micromodels , 2012, Transport in Porous Media.

[20]  S. Hassanizadeh,et al.  A novel deep reactive ion etched (DRIE) glass micro-model for two-phase flow experiments. , 2012, Lab on a chip.

[21]  S. M. Hassanizadeh,et al.  A Review of Micromodels and Their Use in Two‐Phase Flow Studies , 2012 .

[22]  F. Torabi,et al.  The evaluation of CO2-based vapour extraction (VAPEX) process for heavy-oil recovery , 2012, Journal of Petroleum Exploration and Production Technology.

[23]  Anthony R. Kovscek,et al.  Creation of a dual-porosity micromodel for pore-level visualization of multiphase flow , 2012 .

[24]  M. Barrufet,et al.  A Critical Review of Hybrid Steam/Solvent Processes for the Recovery of Heavy Oil and Bitumen , 2012 .

[25]  Naga Siva Kumar Gunda,et al.  Reservoir-on-a-chip (ROC): a new paradigm in reservoir engineering. , 2011, Lab on a chip.

[26]  J. Abedi,et al.  Physical Properties and Extraction Measurements for the Athabasca Bitumen + Light Hydrocarbon System: Evaluation of the Pressure Effect, Solvent-to-Bitumen Ratio, and Solvent Type , 2011 .

[27]  T. Babadagli,et al.  Heavy oil and bitumen recovery by hot solvent injection , 2011 .

[28]  Mart Oostrom,et al.  Liquid CO2 displacement of water in a dual-permeability pore network micromodel. , 2011, Environmental science & technology.

[29]  Ioannis Chatzis,et al.  Pore-Level Investigation of Heavy Oil and Bitumen Recovery Using Solvent −Aided Steam Assisted Gravity Drainage (SA-SAGD) Process , 2010 .

[30]  N. Rezaei,et al.  Warm VAPEX: A Thermally Improved Vapor Extraction Process for Recovery of Heavy Oil and Bitumen , 2010 .

[31]  Piyush Srivastava,et al.  Laboratory Evaluation of a Chemical Additive to Increase Production in Steam Assisted Gravity Drainage (SAGD) , 2010 .

[32]  Eduardo Landulfo,et al.  Application of Fluorescence to the Study of Crude Petroleum , 2011, Journal of Fluorescence.

[33]  Tayfun Babadagli,et al.  SAGD laboratory experimental and numerical simulation studies: A review of current status and future issues , 2009 .

[34]  Yongan Gu,et al.  Theoretical and physical modeling of a solvent vapour extraction (VAPEX) process for heavy oil recovery , 2009 .

[35]  W. Svrcek,et al.  Phase Behaviour and Physical Property Measurements for VAPEX Solvents: Part I. Propane and Athabasca Bitumen , 2009 .

[36]  Ali Danesh,et al.  Microscopic Mechanisms of Oil Recovery By Near-Miscible Gas Injection , 2008 .

[37]  Ali Danesh,et al.  Visualisation of Residual Oil Recovery by Near-miscible Gas and SWAG Injection Using High-pressure Micromodels , 2008 .

[38]  A. Kantzas,et al.  Computed Tomography Study of VAPEX Process in Laboratory 3D Model , 2008 .

[39]  J. Nenniger,et al.  How Fast is Solvent Based Gravity Drainage , 2008 .

[40]  S. Thomas.  Enhanced Oil Recovery - An Overview , 2008 .

[41]  A. Lohi,et al.  Vapor Extraction of Heavy Oil and Bitumen: A Review , 2007 .

[42]  Ioannis Chatzis,et al.  VAPEX, Warm VAPEX and Hybrid VAPEX : The State of Enhanced Oil Recovery for In Situ Heavy Oils in Canada , 2007 .

[43]  Oliver C. Mullins,et al.  Molecular size and weight of asphaltene and asphaltene solubility fractions from coals, crude oils and bitumen , 2006 .

[44]  L. James,et al.  DETAILS OF GRAVITY DRAINAGE OF HEAVY OIL DURING VAPOUR EXTRACTION , 2004 .

[45]  S. M. Farouq Ali,et al.  Heavy oil—evermore mobile , 2003 .

[46]  P. Peng,et al.  About the Colloidal Nature of Asphaltenes and the MW of Covalent Monomeric Units , 2002 .

[47]  Roger M. Butler,et al.  Improved Recovery of Heavy Oil by Vapex with Widely Spaced Horizontal Injectors and Producers , 2000 .

[48]  A. Graue,et al.  Systematic wettability alteration by aging sandstone and carbonate rock in crude oil , 1999 .

[49]  Roger M. Butler,et al.  Mechanism of the vapor extraction process for heavy oil and bitumen , 1998 .

[50]  A. Drews.  Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method , 1998 .

[51]  Swapan Das,et al.  Diffusion coefficients of propane and butane in peace river bitumen , 1996 .

[52]  S. Das,et al.  Effect of Asphaltene Deposition On the Vapex Process: A Preliminary Investigation Using a Hele-Shaw Cell , 1994 .

[53]  K. Mohanty,et al.  Pore-Level Mechanisms of Residual Oil Formation during Miscible Displacement , 1994 .

[54]  Roger M. Butler,et al.  A New Process (VAPEX) For Recovering Heavy Oils Using Hot Water And Hydrocarbon Vapour , 1991 .

[55]  R. Lenormand,et al.  Mechanisms of the displacement of one fluid by another in a network of capillary ducts , 1983, Journal of Fluid Mechanics.

[56]  N. Wardlaw,et al.  A Method of Making Two-dimensional Glass Micromodels of Pore Systems , 1982 .

[57]  G D Mossop,et al.  Geology of the Athabasca Oil Sands , 1980, Science.

[58]  John C. Calhoun,et al.  Visual Examinations of Fluid Behavior in Porous Media - Part I , 1952 .