Development of 3D PCL microsphere/TiO2 nanotube composite scaffolds for bone tissue engineering.
暂无分享,去创建一个
Lobat Tayebi | Hossein E Jazayeri | Mohammadreza Tahriri | Kimia Khoshroo | Fathollah Moztarzadeh | F. Moztarzadeh | M. Tahriri | H. Jazayeri | L. Tayebi | T. J. Jafarzadeh Kashi | Tahereh S Jafarzadeh Kashi | K. Khoshroo
[1] S F Hulbert,et al. Potential of ceramic materials as permanently implantable skeletal prostheses. , 1970, Journal of biomedical materials research.
[2] E. White,et al. The restoration of the articular surfaces overlying Replamineform porous biomaterials. , 1977, Journal of biomedical materials research.
[3] I. Kangasniemi,et al. Bonelike Hydroxyapatite Induction by a Gel‐Derived Titania on a Titanium Substrate , 1994 .
[4] T. Kokubo,et al. Differences of bone bonding ability and degradation behaviour in vivo between amorphous calcium phosphate and highly crystalline hydroxyapatite coating. , 1996, Biomaterials.
[5] D. Harrison,et al. Fibrous capsule formation in response to ultrahigh molecular weight polyethylene treated with peptides that influence adhesion. , 1997, Biomedical sciences instrumentation.
[6] I Gotman,et al. Characteristics of metals used in implants. , 1997, Journal of endourology.
[7] P. Brown,et al. Low temperature formation of calcium-deficient hydroxyapatite-PLA/PLGA composites. , 2000, Journal of biomedical materials research.
[8] T. Albrektsson,et al. Osteoinduction, osteoconduction and osseointegration , 2001, European Spine Journal.
[9] T. Webster. Nanophase ceramics: The future orthopedic and dental implant material , 2001 .
[10] L. Griffith,et al. Tissue Engineering--Current Challenges and Expanding Opportunities , 2002, Science.
[11] Cato T Laurencin,et al. Tissue engineered microsphere-based matrices for bone repair: design and evaluation. , 2002, Biomaterials.
[12] T. Kissel,et al. Characterization of a homologous series of D,L-lactic acid oligomers; a mechanistic study on the degradation kinetics in vitro. , 2003, Biomaterials.
[13] C. Laurencin,et al. Structural and human cellular assessment of a novel microsphere-based tissue engineered scaffold for bone repair. , 2003, Biomaterials.
[14] L. Guan,et al. Preparation and characterization of a highly macroporous biodegradable composite tissue engineering scaffold. , 2004, Journal of biomedical materials research. Part A.
[15] U. Holzwarth,et al. Effect of surface finish on the osseointegration of laser-treated titanium alloy implants. , 2004, Biomaterials.
[16] R. Reis,et al. Bioinert, biodegradable and injectable polymeric matrix composites for hard tissue replacement: state of the art and recent developments , 2004 .
[17] Abraham Jacob,et al. Use of Mimix hydroxyapatite bone cement for difficult ossicular reconstruction , 2004, Otolaryngology--head and neck surgery : official journal of American Academy of Otolaryngology-Head and Neck Surgery.
[18] J. Tamura,et al. Bioactive bone cements containing nano-sized titania particles for use as bone substitutes. , 2005, Biomaterials.
[19] M. Smeltzer,et al. Is aseptic loosening truly aseptic? , 2005, Clinical orthopaedics and related research.
[20] Takashi Nakamura,et al. Process and kinetics of bonelike apatite formation on sintered hydroxyapatite in a simulated body fluid. , 2005, Biomaterials.
[21] Thomas J Webster,et al. Increased osteoblast functions on nanophase titania dispersed in poly-lactic-co-glycolic acid composites , 2005, Nanotechnology.
[22] S. Bhaduri,et al. In vitro testing of calcium phosphate (HA, TCP, and biphasic HA-TCP) whiskers. , 2006, Journal of biomedical materials research. Part A.
[23] Cato T Laurencin,et al. In vitro evaluation of chitosan/poly(lactic acid-glycolic acid) sintered microsphere scaffolds for bone tissue engineering. , 2006, Biomaterials.
[24] Jay C. Sy,et al. Towards developing surface eroding poly(α-hydroxy acids) , 2006 .
[25] M. Roberts,et al. Grey Goo on the Skin? Nanotechnology, Cosmetic and Sunscreen Safety , 2007, Critical reviews in toxicology.
[26] Rui Li,et al. Morphology and properties of organic-inorganic hybrid materials involving TiO2 and poly(epsilon-caprolactone), a biodegradable aliphatic polyester. , 2007, Journal of biomedical materials research. Part A.
[27] Huipin Yuan,et al. Impact of pore size on the vascularization and osseointegration of ceramic bone substitutes in vivo. , 2008, Journal of biomedical materials research. Part A.
[28] K. Khor,et al. Initial attachment of osteoblastic cells onto sol-gel derived fluoridated hydroxyapatite coatings. , 2008, Journal of biomedical materials research. Part A.
[29] M. Tahriri,et al. Investigation of phase transition of γ-alumina to α-alumina via mechanical milling method , 2008 .
[30] M. Tahriri,et al. Preparation and characterisation of α-Al2O3 powder from γ-Al2O3 powder using mechanical milling technique , 2008 .
[31] Sun-Jae Kim,et al. Preparation and photocatalytic activity of nanotubes obtained from titanium dioxide , 2008 .
[32] P. Vilarinho,et al. Synthesis and characterization of one-dimensional titanate structure , 2008 .
[33] M. Tahriri,et al. The comparison of powder characteristics and physicochemical, mechanical and biological properties between nanostructure ceramics of hydroxyapatite and fluoridated hydroxyapatite , 2009 .
[34] Mohammadreza Tahriri,et al. Controllable synthesis, characterization and optical properties of ZnS:Mn nanoparticles as a novel biosensor , 2009 .
[35] M. Tahriri,et al. Synthesis and characterization of nanocrystalline α-Al2O3 using Al and Fe2O3 (hematite) through mechanical alloying , 2009 .
[36] F. Moztarzadeh,et al. Ammonia-free method for synthesis of CdS nanocrystalline thin films through chemical bath deposition technique , 2009 .
[37] H. Baharvand,et al. Preparation and surface characterization of poly-L-lysine-coated PLGA microsphere scaffolds containing retinoic acid for nerve tissue engineering: in vitro study. , 2009, Colloids and surfaces. B, Biointerfaces.
[38] M. Tahriri,et al. Mechanochemical assisted synthesis and powder characteristics of nanostructure ceramic of α-Al2O3 at room temperature , 2009 .
[39] Hani E Naguib,et al. A study on the effect of degradation media on the physical and mechanical properties of porous PLGA 85/15 scaffolds. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.
[40] A. Zamanian,et al. Novel calcium hydroxide/nanohydroxyapatite composites for dental applications: in vitro study , 2010 .
[41] F. Moztarzadeh,et al. Preparation, characterization and mechanical properties of controlled porous gelatin/hydroxyapatite nanocomposite through layer solvent casting combined with freeze-drying and lamination techniques , 2010 .
[42] M. Tahriri,et al. The influence of some processing conditions on host crystal structure and phosphorescence properties of SrAl2O4:Eu2+, Dy3+ nanoparticle pigments synthesized by combustion technique , 2010 .
[43] F. Moztarzadeh,et al. Evaluation of sol–gel derived Eu2+ activated SrMgAl2SiO7 as a novel nanostructure luminescent pigment , 2010 .
[44] P. Khoshakhlagh,et al. Synthesis, characterization and bioactivity investigation of bioglass/hydroxyapatite composite , 2010 .
[45] M. Tahriri,et al. Synthesis and characterization of nanocrystalline hydroxyapatite obtained by the wet chemical technique , 2010 .
[46] M. Mozafari,et al. Development of macroporous nanocomposite scaffolds of gelatin/bioactive glass prepared through layer solvent casting combined with lamination technique for bone tissue engineering , 2010 .
[47] H. Baharvand,et al. Effect of poly-L-lysine coating on retinoic acid-loaded PLGA microspheres in the differentiation of carcinoma stem cells into neural cells. , 2010, The International journal of artificial organs.
[48] F. Moztarzadeh,et al. EFFECT OF MANGANESE (MN) DOPING ON THE OPTICAL PROPERTIES OF ZINC SULFIDE (ZNS) SEMICONDUCTOR NANOCRYSTALS , 2010 .
[49] F. Moztarzadeh,et al. A Nanostructure Phosphor: Effect of Process Parameters on the Photoluminescence Properties for Near-UV WLED Applications , 2012, Journal of Inorganic and Organometallic Polymers and Materials.
[50] F. Moztarzadeh,et al. Development of biphasic hydroxyapatite/dicalcium phosphate dihydrate (DCPD) bone graft using polyurethane foam template: in vitro and in vivo study , 2011 .
[51] M. Tahriri,et al. Combusion synthesis, structural and photo-physical characteristics of Eu2+ and Dy3+ co-doped SrAl2O4 phosphor nanopowders , 2011 .
[52] M. Mozafari,et al. Green synthesis and characterisation of spherical PbS luminescent micro‐ and nanoparticles via wet chemical technique , 2011 .
[53] M. Tahriri,et al. Preparation and characterization of absorbable hemostat crosslinked gelatin sponges for surgical applications , 2011 .
[54] F. Moztarzadeh,et al. Sol–gel synthesis, structural and optical characteristics of Sr1−xZn2Si2yO7+δ: xEu2+ as a potential nanocrystalline phosphor for near-ultraviolet white light-emitting diodes , 2012, Journal of Materials Science.
[55] Solvent and melting induced microspheres sintering techniques: a comparative study of morphology and mechanical properties , 2011, Journal of materials science. Materials in medicine.
[56] S. Alavi,et al. Synthesis and Characterization of SrAl2O4:Eu2+, Dy3+ Nanocrystalline Phosphorescent Pigments , 2011 .
[57] F. Moztarzadeh,et al. Synthesis, characterisation and thermal properties of Ca5(PO4)3(OH)1−xFx (0⩽x⩽1) nanopowders via pH cycling method , 2011 .
[58] F. Moztarzadeh,et al. Controlled Synthesis, Characterization and Magnetic Properties of Magnetite (Fe3O4) Nanoparticles without Surfactant under N2 Gas at Room Temperature , 2011 .
[59] Sol-gel synthesis, characterization and luminescence properties of SrMgAl2 SiO7:Eu2+ as a novel nanocrystalline phosphor. , 2011, Luminescence : the journal of biological and chemical luminescence.
[60] F. Moztarzadeh,et al. A new optical bio-sensor: Wet-chemical synthesis and surface treatment of nanocrystalline Zn 1 − x S : Mn x 2 + , 2011 .
[61] M. Tahriri,et al. A NOVEL METHOD FOR SYNTHESIS OF METASTABLE TETRAGONAL ZIRCONIA NANOPOWDERS AT LOW TEMPERATURES , 2011 .
[62] M. Tahriri,et al. Optical characterization of the novel nanostructure Eu-doped phosphor for potential application in LEDs , 2011, 2011 International Quantum Electronics Conference (IQEC) and Conference on Lasers and Electro-Optics (CLEO) Pacific Rim incorporating the Australasian Conference on Optics, Lasers and Spectroscopy and the Australian Conference on Optical Fibre Technology.
[63] J. L. Escobar Ivirico,et al. Alkaline degradation study of linear and network poly(ε-caprolactone) , 2011, Journal of materials science. Materials in medicine.
[64] M. Tahriri,et al. Characterisation of binary (Fe3O4/SiO2) biocompatible nanocomposites as magnetic fluid , 2011 .
[65] Q. Wei,et al. Fabrication and characterization of polycaprolactone/calcium sulfate whisker composites , 2011 .
[66] F. Moztarzadeh,et al. Nanocrystalline fluorine-substituted hydroxyapatite [Ca 5 (PO 4 ) 3 (OH) 1-x F x (0 ⩽ x ⩽ 1)] for biomedical applications: preparation and characterisation , 2012 .
[67] B. Marí,et al. Hydrolytic and enzymatic degradation of a poly(ε-caprolactone) network , 2012 .
[68] F. Moztarzadeh,et al. Micro-Emulsion Synthesis, Surface Modification, and Photophysical Properties of ${\rm Zn}_{1-x}~{\rm Mn}_{\rm x} {\rm S}$ Nanocrystals for Biomolecular Recognition , 2012, IEEE Transactions on NanoBioscience.
[69] M. Tahriri,et al. Chitosan/heparin surface modified polyacrylic acid grafted polyurethane film by two step plasma treatment , 2012 .
[70] N. Nezafati,et al. Development of a composite based on hydroxyapatite and magnesium and zinc‐containing sol–gel-derived bioactive glass for bone substitute applications , 2012 .
[71] F. Moztarzadeh,et al. SYNTHESIS, CHARACTERIZATION AND BIOLOGICAL EVALUATION OF SOL-GEL DERIVED NANOMATERIAL IN THE TERNARY SYSTEM 64 % SiO 2 - 31 % CaO - 5 % P 2 O 5 AS A BIOACTIVE GLASS: IN VITRO STUDY , 2013 .
[72] Alessandro Sannino,et al. The biomaterialist’s task: scaffold biomaterials and fabrication technologies , 2013, Joints.
[73] M. Tahriri,et al. SrZn_2Si_2O_7:Eu^2+, Mn^2+: a single-phased emission tunable nanophosphor suitable for white light emitting diodes , 2013 .
[74] M. Shokrgozar,et al. Response of Human Mesenchymal Stem Cells to Patterned and Randomly Oriented Poly(Vinyl Alcohol) Nano-fibrous Scaffolds Surface-Modified with Arg-Gly-Asp (RGD) Ligand , 2013, Applied Biochemistry and Biotechnology.
[75] F. Moztarzadeh,et al. Preparation, Characterization, and In Vitro Biological Evaluation of PLGA/Nano-Fluorohydroxyapatite (FHA) Microsphere-Sintered Scaffolds for Biomedical Applications , 2014, Applied Biochemistry and Biotechnology.
[76] Mohammad Reza Mohammadi,et al. Development of sol-gel-derived multi-wall carbon nanotube/hydroxyapatite nanocomposite powders for bone substitution , 2014 .
[77] M. Alizadeh,et al. The Relationship Between the Synthesis and Morphology of SnO2-Ag2O Nanocomposite , 2014 .
[78] M. Shokrgozar,et al. Development of biomimetic gelatin–chitosan/hydroxyapatite nanocomposite via double diffusion method for biomedical applications , 2014 .
[79] M. Dodel,et al. Development of Polyvinyl Alcohol Fibrous Biodegradable Scaffolds for Nerve Tissue Engineering Applications: In Vitro Study , 2015 .
[80] Reza Masaeli,et al. Applications of PLGA in Dentistry , 2015 .
[81] A. Zamanian,et al. Synthesis, Characterization and In Vitro Biological Evaluation of Sol-gel Derived Sr-containing Nano Bioactive Glass , 2017, Silicon.
[82] F. Moztarzadeh,et al. The Influence of Calcination Temperature on the Structural and Biological Characteristics of Hydrothermally Synthesized TiO2 Nanotube: In Vitro Study , 2016 .
[83] M. Tahriri,et al. Preparation, Characterization and Evaluation of Drug Release Properties of Simvastatin-loaded PLGA Microspheres , 2016, Iranian journal of pharmaceutical research : IJPR.
[84] Rozlin Abdul Rahman,et al. Articular cartilage tissue engineering using poly(lactic-co-glycolic acid) based scaffolds seeded with bone marrow mesenchymal stem cells: from in vitro to in vivo model , 2016 .
[85] F. Moztarzadeh,et al. Hydrothermal Synthesis and Characterization of TiO2-Derived Nanotubes for Biomedical Applications , 2016 .