Identification of non volatile migrant compounds and NIAS in polypropylene films used as food packaging characterized by UPLC-MS/QTOF.

[1]  N. Ayed,et al.  Characterization of plastic packaging additives: Food contact, stability and toxicity , 2017 .

[2]  M. Paoli,et al.  Polyamide-6 composites reinforced with cellulose fibers and fabricated by extrusion: Effect of fiber bleaching on mechanical properties and stability , 2017 .

[3]  M. J. Martínez-Bueno,et al.  Characterization of non-intentionally added substances (NIAS) and zinc oxide nanoparticle release from evaluation of new antimicrobial food contact materials by both LC-QTOF-MS, GC-QTOF-MS and ICP-MS , 2016 .

[4]  U. Heinrich,et al.  Effect of the multifunctional cosmetic ingredient sphinganine on hair loss in males and females with diffuse hair reduction , 2016, Clinical, cosmetic and investigational dermatology.

[5]  Flavourings.  Safety assessment of the substance ground sunflower seed hulls, for use in food contact materials , 2016 .

[6]  M. Rubino,et al.  Effect of cut edge area on the migration of BHT from polypropylene film into a food simulant , 2016 .

[7]  A. Covaci,et al.  Evaluation of the migration of chemicals from baby bottles under standardised and duration testing conditions , 2016, Food additives & contaminants. Part A, Chemistry, analysis, control, exposure & risk assessment.

[8]  C. Nerín,et al.  Multiple headspace-solid phase microextraction for the determination of migrants coming from a self-stick label in fresh sausage. , 2016, Food chemistry.

[9]  Emma L. Schymanski,et al.  Mass spectral databases for LC/MS- and GC/MS-based metabolomics: state of the field and future prospects , 2016 .

[10]  A. Covaci,et al.  Quantitative Determination of Migrating compounds from Plastic Baby Bottles by Validated GC-QqQ-MS and LC-QqQ-MS Methods , 2016, Food Analytical Methods.

[11]  M. Biedermann,et al.  Compliance work for polyolefins in food contact: Results of an official control campaign , 2016 .

[12]  F. Hernández,et al.  Analytical strategy based on the combination of gas chromatography coupled to time-of-flight and hybrid quadrupole time-of-flight mass analyzers for non-target analysis in food packaging. , 2015, Food chemistry.

[13]  Tania Portolés,et al.  Identification of substances migrating from plastic baby bottles using a combination of low-resolution and high-resolution mass spectrometric analysers coupled to gas and liquid chromatography. , 2015, Journal of mass spectrometry : JMS.

[14]  B. Lee,et al.  Safety and risk assessment of ceramide 3 in cosmetic products. , 2015, Food and chemical toxicology : an international journal published for the British Industrial Biological Research Association.

[15]  M. Rani,et al.  Qualitative Analysis of Additives in Plastic Marine Debris and Its New Products , 2015, Archives of Environmental Contamination and Toxicology.

[16]  M. Suman,et al.  Migration of selected hydrocarbon contaminants into dry semolina and egg pasta packed in direct contact with virgin paperboard and polypropylene film , 2015, Food additives & contaminants. Part A, Chemistry, analysis, control, exposure & risk assessment.

[17]  C. Nerín,et al.  UPLC–ESI-Q-TOF-MSE and GC–MS identification and quantification of non-intentionally added substances coming from biodegradable food packaging , 2015, Analytical and Bioanalytical Chemistry.

[18]  G. Jiang,et al.  Determination of synthetic phenolic antioxidants and relative metabolites in sewage treatment plant and recipient river by high performance liquid chromatography-electrospray tandem mass spectrometry. , 2015, Journal of chromatography. A.

[19]  C. Nerín,et al.  Risk assessment derived from migrants identified in several adhesives commonly used in food contact materials. , 2015, Food and chemical toxicology : an international journal published for the British Industrial Biological Research Association.

[20]  A. Covaci,et al.  Development and application of a non-targeted extraction method for the analysis of migrating compounds from plastic baby bottles by GC-MS , 2014, Food additives & contaminants. Part A, Chemistry, analysis, control, exposure & risk assessment.

[21]  M. Tacker,et al.  Detection and Identification of Oestrogen‐Active Substances in Plastic Food Packaging Migrates , 2014 .

[22]  Ying Li,et al.  Simultaneous Determination of Antioxidants and Ultraviolet Absorbers by Ultra-Performance Liquid Chromatography in Food Simulants , 2014, Food Analytical Methods.

[23]  Juming Tang,et al.  Migration of Chemical Compounds from Packaging Polymers during Microwave, Conventional Heat Treatment, and Storage. , 2013, Comprehensive reviews in food science and food safety.

[24]  M. Aznar,et al.  The challenge of identifying non-intentionally added substances from food packaging materials: a review. , 2013, Analytica chimica acta.

[25]  C. Nerín,et al.  Identification of non-volatile compounds and their migration from hot melt adhesives used in food packaging materials characterized by ultra-performance liquid chromatography coupled to quadrupole time-of-flight mass spectrometry , 2013, Analytical and Bioanalytical Chemistry.

[26]  C. Nerin,et al.  UPLC-Q-TOF-MS analysis of non-volatile migrants from new active packaging materials , 2012, Analytical and Bioanalytical Chemistry.

[27]  S. Allahvaisi.  Polypropylene in the Industry of Food Packaging , 2012 .

[28]  C. Nerín,et al.  Analytical tools for identification of non-intentionally added substances (NIAS) coming from polyurethane adhesives in multilayer packaging materials and their migration into food simulants , 2012, Analytical and Bioanalytical Chemistry.

[29]  K. Grob,et al.  Migration of polyolefin oligomeric saturated hydrocarbons (POSH) into food , 2011, Food additives & contaminants. Part A, Chemistry, analysis, control, exposure & risk assessment.

[30]  C. Simoneau,et al.  Identification and quantification of the migration of chemicals from plastic baby bottles used as substitutes for polycarbonate , 2011, Food additives & contaminants. Part A, Chemistry, analysis, control, exposure & risk assessment.

[31]  M. Hakkarainen,et al.  Microwave heating causes rapid degradation of antioxidants in polypropylene packaging, leading to greatly increased specific migration to food simulants as shown by ESI-MS and GC-MS. , 2011, Journal of agricultural and food chemistry.

[32]  Minna Hakkarainen,et al.  Type of Polypropylene Material Significantly Influences the Migration of Antioxidants from Polymer Packaging to Food Simulants During Microwave Heating , 2010 .

[33]  R. Cela,et al.  Determination of synthetic phenolic antioxidants and their metabolites in water samples by downscaled solid-phase extraction, silylation and gas chromatography-mass spectrometry. , 2010, Journal of chromatography. A.

[34]  M. Farajzadeh,et al.  Optimization of Dispersive Liquid–Liquid Microextraction of Irganox 1010 and Irgafos 168 from Polyolefins Before Liquid Chromatographic Analysis , 2009 .

[35]  R. Rijk,et al.  Analytical protocol to study the food safety of (multiple-)recycled high-density polyethylene (HDPE) and polypropylene (PP) crates: Influence of recycling on the migration and formation of degradation products , 2007 .

[36]  J. M. López-Vilariño,et al.  Antioxidant content of and migration from commercial polyethylene, polypropylene, and polyvinyl chloride packages. , 2007, Journal of agricultural and food chemistry.

[37]  B. Harte,et al.  Effect of high-pressure processing on the migration of antioxidant Irganox 1076 from polypropylene film into a food simulant , 2005 .

[38]  C. Nerín,et al.  Behavior of some solid food simulants in contact with several plastics used in microwave ovens. , 2002, Journal of agricultural and food chemistry.

[39]  R. Gavara,et al.  Characterizing the migration of antioxidants from polypropylene into fatty food simulants , 2001, Food additives and contaminants.

[40]  D. Acierno,et al.  Migrational Behaviour of Food Grade PP , 2000 .

[41]  Y. Kawamura,et al.  Determination of additives in food contact polypropylene , 2000 .