Preparation, characterization and thermal properties of binary nitrate salts/expanded graphite as composite phase change material

Abstract The binary nitrate salts/expanded graphite (EG) composite phase change material (PCM) were prepared via adding different mass rate of EG to binary nitrate salts consisting of NaNO 3 and KNO 3 (6:4) by aqueous solution method adopting ultrasonic. The morphology and chemical composition of EG and the composite PCM were characterized and investigated by X-ray diffraction (XRD), scan electron microscope (SEM), energy dispersive spectrometer (EDS), transmission electron microscope (TEM), respectively. Laser thermal conductivity instrument and differential scanning calorimeter (DSC) were employed to measure thermo physical properties. Drawing the conclusion from investigation, that EG had enhanced thermal conductivity coefficient which largely increased to 4.884 W/(m K) and reduced total latent heat by mostly 11.0%. The morphology and phase structure results indicated that EG were well dispersed into and physically combined with molten salts. In general, the prepared composite PCM could be a suitable phase change material for thermal energy storage.

[1]  Xuejun Zhang,et al.  Thermodynamic evaluation of phase equilibria in NaNO3-KNO3 system , 2003 .

[2]  Luisa F. Cabeza,et al.  Modeling phase change materials behavior in building applications: Comments on material characterization and model validation , 2012 .

[3]  Zia Ud Din,et al.  Phase change material (PCM) storage for free cooling of buildings—A review , 2013 .

[4]  Zhengyi Jiang,et al.  Analysis of multi-layer sandwich structures by finite element method , 2011 .

[5]  Zhonghao Rao,et al.  Molecular dynamics simulations of nano-encapsulated and nanoparticle-enhanced thermal energy storage phase change materials , 2013 .

[6]  Zhonghao Rao,et al.  Thermal Properties of Paraffin Wax-based Composites Containing Graphite , 2011 .

[7]  Ming Li,et al.  Thermal characterization of nitrates and nitrates/expanded graphite mixture phase change materials for solar energy storage , 2013 .

[8]  Zhonghao Rao,et al.  Preparation of Graphite Nanoplatelets by Perchloric Acid Intercalation, Microwave Expansion and Ultrasonic Irradiation , 2012 .

[9]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[10]  Luisa F. Cabeza,et al.  Experimental study on the selection of phase change materials for low temperature applications , 2013 .

[11]  Hui Li,et al.  Preparation and characterization of stearic acid/expanded graphite composites as thermal energy storage materials , 2010 .

[12]  Yanlai Zhang,et al.  Molecular dynamics simulations of melting behavior of alkane as phase change materials slurry , 2012 .

[13]  Changying Zhao,et al.  Thermal property characterization of a low melting-temperature ternary nitrate salt mixture for thermal energy storage systems , 2011 .

[14]  Luisa F. Cabeza,et al.  Material selection and testing for thermal energy storage in solar cooling , 2013 .

[15]  Elena Palomo Del Barrio,et al.  KNO3/NaNO3 – Graphite materials for thermal energy storage at high temperature: Part I. – Elaboration methods and thermal properties , 2010 .

[16]  S. Kalaiselvam,et al.  Analytical and experimental investigations of nanoparticles embedded phase change materials for cooling application in modern buildings , 2012 .

[17]  Alparslan Oztekin,et al.  High temperature calorimetry and use of magnesium chloride for thermal energy storage , 2013 .

[18]  Elena Palomo Del Barrio,et al.  KNO3/NaNO3 – Graphite materials for thermal energy storage at high temperature: Part II. – Phase transition properties , 2010 .

[19]  Xiaoxi Yang,et al.  The preparation and properties of multi-component molten salts , 2010 .

[20]  Sumin Kim,et al.  Improvement of the thermal properties of Bio-based PCM using exfoliated graphite nanoplatelets , 2013 .

[21]  S. M. Hasnain.  Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniques , 1998 .

[22]  P. Zhang,et al.  Thermal property measurement and heat transfer analysis of acetamide and acetamide/expanded graphite composite phase change material for solar heat storage , 2011 .

[23]  Ya-Ling He,et al.  Numerical study on performance of molten salt phase change thermal energy storage system with enhanced tubes , 2012 .

[24]  T. Bauer,et al.  An experimental study of a non-eutectic mixture of KNO3 and NaNO3 with a melting range for thermal energy storage , 2013 .

[25]  Tingyu Wang,et al.  Preparation, characterization, and thermal properties of the microencapsulation of a hydrated salt as phase change energy storage materials , 2013 .

[26]  A. Sari,et al.  Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material , 2007 .

[27]  Panayiotis A. Kyriacou,et al.  Improved measurement technique for the characterization of organic and inorganic phase change materials using the T-history method , 2013 .

[28]  Scott Thomas Broome,et al.  Thermal and mechanical properties of nitrate thermal storage salts in the solid-phase , 2012 .

[29]  Ni Zhang,et al.  Preparation and thermal energy storage properties of paraffin/expanded graphite composite phase change material , 2012 .

[30]  C. H. Wang,et al.  Exfoliated graphite/paraffin nanocomposites as phase change materials for thermal energy storage application , 2011 .

[31]  L. Drzal,et al.  High latent heat storage and high thermal conductive phase change materials using exfoliated graphite nanoplatelets , 2009 .