Atmospheric corrosion performance of structural steel bolts in the Wenchang marine environment, South China

[1]  C. Li,et al.  Synergistic effect of crevice corrosion and galvanic coupling on 304SS fasteners degradation in chloride environments , 2023, npj Materials Degradation.

[2]  Jiahao Shen,et al.  In-service failure of mechanically galvanised low alloy steel bolts of three 25,000 m3 bolted water tanks , 2022, Engineering Failure Analysis.

[3]  C. Li,et al.  Insights into the characteristics of corrosion products formed on the contact and exposed regions of C1045 steel bolt and nut fasteners exposed to aqueous chloride environments , 2022, Journal of Materials Science & Technology.

[4]  Huajie Tang,et al.  Effects of Alloying Elements and Microstructure on Stainless Steel Corrosion: A Review , 2021, steel research international.

[5]  K. Sahu,et al.  Fractal behavior of surface oxide crack patterns on AISI 4140 high-strength low-alloy steel exposed to the simulated offshore environment , 2021 .

[6]  Junhua Dong,et al.  Corrosion Behaviour of Carbon Steel Fasteners in Neutral Chloride Solution , 2021, Acta Metallurgica Sinica (English Letters).

[7]  W. Ke,et al.  Effects of rare earth modifying inclusions on the pitting corrosion of 13Cr4Ni martensitic stainless steel , 2021 .

[8]  S. Fonna,et al.  Investigation of corrosion products formed on the surface of carbon steel exposed in Banda Aceh's atmosphere , 2021, Heliyon.

[9]  X. Cheng,et al.  Effect of grain size and crystallographic orientation on the corrosion behaviors of low alloy steel , 2021 .

[10]  W. Ke,et al.  The synergy between cementite spheroidization and Cu alloying on the corrosion resistance of ferrite-pearlite steel in acidic chloride solution , 2021 .

[11]  Xiaokui Yang.  Atmospheric Corrosion Behaviour and Degradation of High- Strength Bolt in Marine and Industrial Atmosphere Environments , 2021 .

[12]  Lang Liu,et al.  Failure analysis on 20MnTiB steel high-strength bolts in steel structure , 2020 .

[13]  Q. Zhong,et al.  Characterization of Passive Films Formed on As-received and Sensitized AISI 304 Stainless Steel , 2019, Chinese Journal of Mechanical Engineering.

[14]  Mahdi Shiri,et al.  Estimated and Stationary Atmospheric Corrosion Rate of Carbon Steel, Galvanized Steel, Copper and Aluminum in Iran , 2019, Metallurgical and Materials Transactions A.

[15]  T. Prošek,et al.  Atmospheric Stress Corrosion Cracking of Stainless Steel Rock Climbing Anchors, Part 1 , 2019, CORROSION.

[16]  S. Barella,et al.  An overview of austenitic stainless-steel rock anchors damage in an environment rich with chlorides , 2019, Engineering Failure Analysis.

[17]  Ying Hu,et al.  Behaviour of stainless steel bolts after exposure to elevated temperatures , 2019, Journal of Constructional Steel Research.

[18]  D. Mizuno,et al.  Characterization of Rust Formed on Structural Carbon and Weathering Steels Exposed to Tropical Climate of Thailand , 2019, CORROSION.

[19]  Kania,et al.  Microstructure Characterization and Corrosion Resistance of Zinc Coating Obtained on High-Strength Grade 10.9 Bolts Using a New Thermal Diffusion Process , 2019, Materials.

[20]  Fernando Casanova,et al.  Fatigue failure of the bolts connecting a Francis turbine with the shaft , 2018, Engineering Failure Analysis.

[21]  S. Shekhar,et al.  Development of gradient microstructure in mild steel and grain size dependence of its electrochemical response , 2018, Corrosion Science.

[22]  Yu Zhao,et al.  Influence of environmental factors on atmospheric corrosion in dynamic environment , 2018, Corrosion Science.

[23]  J. Madariaga,et al.  FTIR spectroscopic semi-quantification of iron phases: A new method to evaluate the protection ability index (PAI) of archaeological artefacts corrosion systems , 2018 .

[24]  Yuantai Ma,et al.  Formation process of akaganeite in the simulated wet-dry cycles atmospheric environment , 2017, Journal of Materials Science & Technology.

[25]  Z. Ławrynowicz.  Bainitic reaction and microstructure evolution in two normalized and tempered steels designed for service at elevated temperatures , 2017 .

[26]  G. Jiang,et al.  Effects of chloride ions on corrosion of ductile iron and carbon steel in soil environments , 2017, Scientific Reports.

[27]  E. Han,et al.  Effects of crevice geometry on corrosion behavior of 304 stainless steel during crevice corrosion in high temperature pure water , 2016 .

[28]  W. Ke,et al.  Sustained effect of remaining cementite on the corrosion behavior of ferrite-pearlite steel under the simulated bottom plate environment of cargo oil tank , 2016 .

[29]  M. Morcillo,et al.  An attempt to classify the morphologies presented by different rust phases formed during the exposure of carbon steel to marine atmospheres , 2016 .

[30]  Yu Sugawara,et al.  Effect of atmospheric aging on dissolution of MnS inclusions and pitting initiation process in type 304 stainless steel , 2016 .

[31]  J. Jiménez,et al.  Corrosion mechanisms of mild steel in chloride‐rich atmospheres , 2016 .

[32]  N. Rajendran,et al.  Weathering Steel in Industrial-Marine-Urban Environment: Field Study , 2016 .

[33]  B. Sainsbury,et al.  Laboratory and field testing of bolting systems subjected to highly corrosive environments , 2016 .

[34]  Iván Díaz,et al.  Airborne chloride deposit and its effect on marine atmospheric corrosion of mild steel , 2015 .

[35]  J. Maciejewski.  The Effects of Sulfide Inclusions on Mechanical Properties and Failures of Steel Components , 2015, Journal of Failure Analysis and Prevention.

[36]  Wang Hui-l.  High-strength bolt corrosion fatigue life estimate model and its application , 2014 .

[37]  T. Shinohara,et al.  Corrosion assessment of carbon steel in Thailand by atmospheric corrosion monitoring (ACM) sensors , 2010 .

[38]  N. R. Baddoo,et al.  Stainless steel in construction: A review of research, applications, challenges and opportunities , 2008 .

[39]  C. Liu,et al.  Influence of pH on the passivation behavior of 254SMO stainless steel in 3.5% NaCl solution , 2007 .

[40]  M. Jenko,et al.  Electrochemical and XPS studies of the passive film formed on stainless steels in borate buffer and chloride solutions , 2007 .

[41]  M. I. Abdulsalam.  Behaviour of crevice corrosion in iron , 2005 .

[42]  Leroy Gardner,et al.  The use of stainless steel in structures , 2005 .

[43]  Dalva Lúcia Araújo de Faria,et al.  Characterization of corrosion products formed on steels in the first months of atmospheric exposure , 2003 .

[44]  R. Alkire,et al.  Microelectrochemical Measurements of the Dissolution of Single MnS Inclusions, and the Prediction of the Critical Conditions for Pit Initiation on Stainless Steel , 2001 .

[45]  A. Simões,et al.  Chemical Composition of Passive Films on AISI 304 Stainless Steel , 1994 .

[46]  R. Snyder,et al.  RIR - Measurement and Use in Quantitative XRD , 1988, Powder Diffraction.