Performance, Facility Pressure Effects, and Stability Characterization Tests of NASA's Hall Effect Rocket with Magnetic Shielding Thruster

NASA's Hall Effect Rocket with Magnetic Shielding (HERMeS) 12.5 kW Technology Demonstration Unit-1 (TDU-1) has been the subject of extensive technology maturation in preparation for flight system development. Part of the technology maturation effort included experimental evaluation of the TDU-1 thruster with conducting and dielectric front pole cover materials in two different electrical configurations. A graphite front magnetic pole cover thruster configuration with the thruster body electrically tied to cathode, and an alumina front pole cover thruster configuration with the thruster body floating were evaluated. Both configurations were also evaluated at different facility background pressure conditions to evaluate background pressure effects on thruster operation. Performance characterization tests found that higher thruster performance was attained with the graphite front pole cover configuration with the thruster electrically tied to cathode. A total thrust efficiency of 68% and a total specific impulse of 2,820 s was demonstrated at a discharge voltage of 600 V and a discharge power of 12.5 kW. Thruster stability regimes were characterized with respect to the thruster discharge current oscillations and with maps of the discharge current-voltage-magnetic field (IVB). Analysis of TDU-1 discharge current waveforms found that lower normalized discharge current peak-to-peak and root mean square magnitudes were attained when the thruster was electrically floated with alumina front pole covers. Background pressure effects characterization tests indicated that the thruster performance and stability were mostly invariant to changes in the facility background pressure for vacuum chamber pressure below 110-5 Torr-Xe (for thruster flow rates of 20.5 mg/s). Power spectral density analysis of the discharge current waveforms showed that increasing the vacuum chamber background pressure resulted in a higher discharge current dominant breathing mode frequency. Finally, IVB maps of the TDU-1 thruster indicated that the discharge current became more oscillatory with higher discharge current peak-to-peak and RMS values with increased facility background pressure at lower thruster mass flow rates; thruster operation at higher flow rates resulted in less change to the thruster's IVB characteristics with elevated background pressure.

[1]  Brian K. Muirhead,et al.  Asteroid Redirect Robotic Mission feasibility study , 2014, 2014 IEEE Aerospace Conference.

[2]  James E. Polk,et al.  Performance and Facility Background Pressure Characterization Tests of NASAs 12.5-kW Hall Effect Rocket with Magnetic Shielding Thruster , 2015 .

[3]  Hani Kamhawi,et al.  Near-Surface Plasma Characterization of the 12.5-kW NASA TDU1 Hall Thruster , 2015 .

[4]  Bryan K. Smith,et al.  Solar Electric Propulsion Vehicle Demonstration to Support Future Space Exploration Missions , 2012 .

[5]  Richard R. Hofer,et al.  Finite Pressure Effects in Magnetically Shielded Hall Thrusters , 2014 .

[6]  T. Haag,et al.  RHETT/EPDM Performance Characterization , 1998 .

[7]  James H. Gilland,et al.  NASA HERMeS Hall Thruster Electrical Configuration Characterization , 2016 .

[8]  John R. Brophy,et al.  Near-Earth Asteroid Retrieval Mission (ARM) Study , 2013 .

[9]  James H. Gilland,et al.  Carbon Back Sputter Modeling for Hall Thruster Testing , 2016 .

[10]  James H. Gilland,et al.  Wear Testing of the HERMeS Thruster , 2016 .

[11]  T. W. Haag.  Thrust stand for high‐power electric propulsion devices , 1991 .

[12]  James L. Myers,et al.  Hall Thruster Thermal Modeling and Test Data Correlation , 2016 .

[13]  David H. Manzella,et al.  High-Power Solar Electric Propulsion for Future NASA Missions , 2014 .

[14]  Rostislav Spektor,et al.  Investigation of the Effects of Facility Background Pressure on the Performance and Voltage-Current Characteristics of the High Voltage Hall Accelerator , 2014 .

[15]  Paul A. Abell,et al.  Asteroid Redirect Robotic Mission: Robotic Boulder Capture Option Overview , 2014 .

[16]  James E. Polk,et al.  Overview of the Development of the Solar Electric Propulsion Technology Demonstration Mission 12.5-kW Hall Thruster , 2014 .

[17]  Jonathan M. Burt,et al.  Characterization of Vacuum Facility Background Gas Through Simulation and Considerations for Electric Propulsion Ground Testing , 2015 .

[18]  I. Mikellides,et al.  Magnetic Shielding of the Acceleration Channel Walls in a Long-Life Hall Thruster , 2010 .

[19]  I. Mikellides,et al.  Magnetic shielding of Hall thrusters at high discharge voltages , 2014 .

[20]  Hani Kamhawi,et al.  Facility Effect Characterization Test of NASA's HERMeS Hall Thruster , 2016 .

[21]  George R. Schmidt,et al.  High-Power Hall Propulsion Development at NASA Glenn Research Center , 2012 .

[22]  Bo Naasz,et al.  NASA's Asteroid Redirect Mission concept development summary , 2015, 2015 IEEE Aerospace Conference.