Influence of carbon incorporation on microstructure and properties of titanium diboride coatings deposited by combining ion beam with magnetron sputtering

[1]  P. Chu,et al.  Enhanced mechanical and electrochemical properties of TiNx thin films prepared by magnetron sputtering with an anode layer ion source , 2019, Surface and Coatings Technology.

[2]  J. Schneider,et al.  Influence of the Al concentration in Ti-Al-B coatings on microstructure and mechanical properties using combinatorial sputtering from a segmented TiB2/AlB2 target , 2019, Surface and Coatings Technology.

[3]  Y. Galindez,et al.  Microstructure, mechanical and tribological properties of TiBC coatings by DC magnetron sputtering onto AISI M2 steel using independent TiB2 and graphite targets , 2018, Surface and Coatings Technology.

[4]  S. Kucheyev,et al.  Degradation of ultra-thin boron films in air , 2018, Applications of Surface Science.

[5]  W. Dai,et al.  Microstructure and property of diamond-like carbon films with Al and Cr co-doping deposited using a hybrid beams system , 2016 .

[6]  L. Näslund,et al.  Influence of pulse frequency and bias on microstructure and mechanical properties of TiB2 coatings deposited by high power impulse magnetron sputtering , 2016 .

[7]  Qiaoqin Yang,et al.  Synthesis and characterization of boron incorporated diamond-like carbon thin films , 2015 .

[8]  I. Bello,et al.  Microstructure and tribo-mechanical properties of Ti–B–C nanocomposite films prepared by magnetron sputtering , 2015 .

[9]  J. Vetter.  60 years of DLC coatings: Historical highlights and technical review of cathodic arc processes to synthesize various DLC types, and their evolution for industrial applications , 2014 .

[10]  K. Bewilogua,et al.  History of diamond-like carbon films — From first experiments to worldwide applications , 2014 .

[11]  P. Zeman,et al.  Effect of Si addition on mechanical properties and high temperature oxidation resistance of Ti–B–Si hard coatings , 2014 .

[12]  F. Huang,et al.  Toughening magnetron sputtered TiB2 coatings by Ni addition , 2013 .

[13]  Yip-Wah Chung,et al.  Relationship between hardness and fracture toughness in Ti–TiB2 nanocomposite coatings , 2012 .

[14]  Sam Zhang,et al.  Toughness evaluation of hard coatings and thin films , 2012 .

[15]  L. Jastrabík,et al.  Effect of air annealing on mechanical properties and structure of amorphous B4C films , 2011 .

[16]  F. Freire,et al.  Titanium diboride thin films produced by dc-magnetron sputtering: Structural and mechanical properties , 2011 .

[17]  J. Schneider,et al.  Experiment and simulation of the compositional evolution of Ti–B thin films deposited by sputtering of a compound target , 2008 .

[18]  F. Richter,et al.  Comparative experimental analysis of the a-C:H deposition processes using CH4 and C2H2 as precursors , 2007 .

[19]  F. V. Kiryukhantsev-Korneev,et al.  Hard tribological Ti–B–N, Ti–Cr–B–N, Ti–Si–B–N and Ti–Al–Si–B–N coatings , 2005 .

[20]  C. Mitterer,et al.  Self-organized nanocolumnar structure in superhard TiB2 thin films , 2005 .

[21]  P. Pigram,et al.  Effect of aluminium ion implantation on the oxidation resistance of DC magnetron sputter-deposited TiB2 thin films , 2003 .

[22]  J. J. Lee,et al.  Deposition of Ti–B–N films by ICP assisted sputtering , 2003 .

[23]  M. Larsson,et al.  Low stress TiB2 coatings with improved tribological properties , 2001 .

[24]  P. Cabarrocas,et al.  Plasma deposition of carbon films at room temperature from C2H2–Ar mixtures: anodic vs. cathodic films , 2001 .

[25]  T. Bolom,et al.  Composition, nanostructure and origin of the ultrahardness in nc-TiN/a-Si3N4/a- and nc-TiSi2 nanocomposites with HV= 80 to ≥ 105 GPa , 2000 .

[26]  H. Tsuda,et al.  Structural and electric properties of TiB2 thin films by RF sputtering , 2000 .

[27]  R. Munro.  Material Properties of Titanium Diboride , 2000, Journal of research of the National Institute of Standards and Technology.

[28]  F. Castro,et al.  Mechanical properties of titanium diboride based cermets , 2000 .

[29]  P. N. Gibson,et al.  Comparative investigation of multilayer TiB2/C and co-sputtered TiB2-C coatings for low-friction applications , 1999 .

[30]  P. N. Gibson,et al.  Microstructure and mechanical properties of multilayer TiB2/C and co-sputtered TiB2-C coatings for cutting tools , 1999 .

[31]  H. Oettel,et al.  Structure of deposited and annealed TiB2 layers , 1997 .

[32]  T. Troczynski,et al.  Oxidation of TiB2 Powders below 900°C , 1996 .

[33]  R. C. King,et al.  Handbook of X Ray Photoelectron Spectroscopy: A Reference Book of Standard Spectra for Identification and Interpretation of Xps Data , 1995 .

[34]  Christian Mitterer,et al.  Sputter deposition of ultrahard coatings within the system Ti-B-C-N , 1990 .

[35]  P. Koidl,et al.  Thermal gas effusion from hydrogenated amorphous carbon films , 1987 .

[36]  D. Bhat.  Comment on “Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System” , 1981 .

[37]  E. A. Charles,et al.  Fracture Toughness Determinations by Indentation , 1976 .