Electrical insulation and breakdown properties of SiO2 and Al2O3 thin multilayer films deposited on stainless steel by physical vapor deposition

Abstract The electrical properties of dielectric thin layers deposited on conducting substrates still need to be thoroughly characterized for a wide variety of applications such as solar modules, flexible displays and sensor integration. In this work, thin dielectric films composed of layers and alternated multilayers of SiO 2 and Al 2 O 3 up to a total thickness of 3 μm have been deposited on flexible rough stainless steel substrates by means of reactive magnetron sputtering. Their electrical properties have been studied focusing on important parameters such as leakage current density and disruptive field strengths. Moreover, temperature annealing and bending effects have been quantified. It is concluded that the best electrical properties with this type of materials are achieved with multilayered structures.

[1]  Fritz B. Prinz,et al.  “Smart” coatings: A technical note , 1995 .

[2]  J. Delgado-Sánchez,et al.  Ceramic barrier layers for flexible thin film solar cells on metallic substrates: a laboratory scale study for process optimization and barrier layer properties. , 2014, ACS applied materials & interfaces.

[3]  S. Franssila.  Introduction to microfabrication , 2004 .

[4]  Xiaochun Li,et al.  Embedded micro/nano sensors for harsh engineering environments , 2008, 2008 IEEE Sensors.

[5]  M. Powalla,et al.  Dielectric barriers for flexible CIGS solar modules , 2002 .

[6]  D. W. Sheel,et al.  The role of SiO2 barrier layers in determining the structure and photocatalytic activity of TiO2 films deposited on stainless steel , 2007 .

[7]  A. Tosi,et al.  Comparison of SiOx and polyimide as a dielectric layer on stainless steel in thin-film pressure sensor manufacture , 1992 .

[8]  Shiro Nishiwaki,et al.  Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films. , 2011, Nature materials.

[9]  K. Jolic,et al.  A fabrication process for vacuum-deposited strain gauges on thermally sprayed Al2O3 , 2006 .

[10]  Qing He,et al.  Cu(In,Ga)Se2 solar cells on stainless-steel substrates covered with ZnO diffusion barriers , 2009 .

[11]  Zhinong Yu,et al.  Dielectric properties and resistance to fatigue failure of different barrier layers prepared on flexible stainless-steel foils by ion-beam assisted deposition , 2012 .

[12]  M. Powalla,et al.  Approaches to flexible CIGS thin-film solar cells , 2005 .