Simulation and Measurement of Local Potentials of Modified Commercial Cylindrical Cells: II: Multi-Dimensional Modeling and Validation

[1]  Yun Cheng,et al.  An Electrochemical-thermal Model Based on Dynamic Responses for Lithium Iron Phosphate Battery , 2014 .

[2]  J. Meyers,et al.  Three-Dimensional Modeling of Electrochemical Performance and Heat Generation of Spirally and Prismatically Wound Lithium-Ion Batteries , 2013 .

[3]  David A. Wetz,et al.  Measurement of anisotropic thermophysical properties of cylindrical Li-ion cells , 2014 .

[4]  John Newman,et al.  Electrochemical Systems, 3rd Edition , 2004 .

[5]  Doron Aurbach,et al.  Diffusion Coefficients of Lithium Ions during Intercalation into Graphite Derived from the Simultaneous Measurements and Modeling of Electrochemical Impedance and Potentiostatic Intermittent Titration Characteristics of Thin Graphite Electrodes , 1997 .

[6]  Chaoyang Wang,et al.  In Situ Measurement of Radial Temperature Distributions in Cylindrical Li-Ion Cells , 2014 .

[7]  M. Doyle,et al.  Relaxation Phenomena in Lithium‐Ion‐Insertion Cells , 1994 .

[8]  Krishnan S. Hariharan,et al.  Generalized moving boundary model for charge–discharge of LiFePO4/C cells , 2014 .

[9]  Martin Z. Bazant,et al.  Particle-Level Modeling of the Charge-Discharge Behavior of Nanoparticulate Phase-Separating Li-Ion Battery Electrodes , 2013, 1309.6495.

[10]  Rahul Malik,et al.  Erratum: A Critical Review of the Li Insertion Mechanisms in LiFePO 4 Electrodes [ J. Electrochem. Soc., 160, A3179 (2013)] , 2016 .

[11]  D. A. G. Bruggeman.  Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen. I. Dielektrizitätskonstanten und Leitfähigkeiten der Mischkörper aus isotropen Substanzen , 1935 .

[12]  Rachel E. Gerver,et al.  Three-Dimensional Modeling of Electrochemical Performance and Heat Generation of Lithium-Ion Batteries in Tabbed Planar Configurations , 2011 .

[13]  Mohammadhosein Safari,et al.  Modeling of a Commercial Graphite/LiFePO4 Cell , 2011 .

[14]  John Newman,et al.  Experiments on and Modeling of Positive Electrodes with Multiple Active Materials for Lithium-Ion Batteries , 2009 .

[15]  K. Smith,et al.  Three dimensional thermal-, electrical-, and electrochemical-coupled model for cylindrical wound large format lithium-ion batteries , 2013 .

[16]  M. Safari,et al.  Mathematical Modeling of Lithium Iron Phosphate Electrode: Galvanostatic Charge/Discharge and Path Dependence , 2011 .

[17]  M. Doyle,et al.  Simulation and Optimization of the Dual Lithium Ion Insertion Cell , 1994 .

[18]  J. Newman,et al.  Simulation of temperature rise in Li-ion cells at very high currents , 2014 .

[19]  Lars Ole Valøen,et al.  Transport Properties of LiPF6-Based Li-Ion Battery Electrolytes , 2005 .

[20]  Robert C. Weast,et al.  Handbook of chemistry and physics : a readyreference book of chemical and physical data , 1972 .

[21]  Chaoyang Wang,et al.  Analysis of Electrochemical and Thermal Behavior of Li-Ion Cells , 2003 .

[22]  Jochen Zausch,et al.  Thermodynamic consistent transport theory of Li-ion batteries , 2011 .

[23]  M. Doyle,et al.  Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell , 1993 .

[24]  Rahul Malik,et al.  A Critical Review of the Li Insertion Mechanisms in LiFePO4 Electrodes , 2013 .

[25]  Dinh Vinh Do,et al.  Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery , 2010 .

[26]  Gi-Heon Kim,et al.  A three-dimensional multi-physics model for a Li-ion battery , 2013 .

[27]  Shriram Santhanagopalan,et al.  Multi-Domain Modeling of Lithium-Ion Batteries Encompassing Multi-Physics in Varied Length Scales , 2011 .

[28]  B. Scrosati,et al.  Lithium batteries: Status, prospects and future , 2010 .

[29]  Ralph E. White,et al.  Mathematical modeling of a lithium ion battery with thermal effects in COMSOL Inc. Multiphysics (MP) , 2011 .

[30]  Charles W. Tobias,et al.  On the Conductivity of Dispersions , 1959 .

[31]  J. Bernard,et al.  Simplified Electrochemical and Thermal Model of LiFePO4-Graphite Li-Ion Batteries for Fast Charge Applications , 2012 .

[32]  Ralph E. White,et al.  A Distributed Thermal Model for a Li-Ion Electrode Plate Pair , 2013 .

[33]  W. Bessler,et al.  Low-temperature charging of lithium-ion cells part I: Electrochemical modeling and experimental investigation of degradation behavior , 2014 .

[34]  Lip Huat Saw,et al.  Effect of thermal contact resistances on fast charging of large format lithium ion batteries , 2014 .

[35]  Wei Lai,et al.  Mathematical Modeling of Porous Battery Electrodes-Revisit of Newman's Model , 2011 .

[36]  Xiangming He,et al.  Electro-thermal modeling and experimental validation for lithium ion battery , 2012 .

[37]  C. M. Doyle.  Design and simulation of lithium rechargeable batteries , 2010 .

[38]  Taeyoung Han,et al.  Full-Range Simulation of a Commercial LiFePO4 Electrode Accounting for Bulk and Surface Effects: A Comparative Analysis , 2014 .

[39]  Robert J. Kee,et al.  Thermodynamically consistent modeling of elementary electrochemistry in lithium-ion batteries , 2010 .

[40]  Andreas Jossen,et al.  Simulation and measurement of local potentials of modified commercial cylindrical cells:I. Cell preparation and measurements , 2015 .

[41]  Seunghun Jung.  Mathematical model of lithium-ion batteries with blended-electrode system , 2014 .

[42]  Rajeswari Chandrasekaran,et al.  Quantification of contributions to the cell overpotential during galvanostatic discharge of a lithium-ion cell , 2014 .

[43]  Venkat Srinivasan,et al.  Discharge Model for the Lithium Iron-Phosphate Electrode , 2004 .

[44]  J. Reimers.  Accurate and Efficient Treatment of Foil Currents in a Spiral Wound Li-Ion Cell , 2014 .

[45]  J. Tarascon,et al.  Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells , 1996 .

[46]  Marc Doyle,et al.  Computer Simulations of a Lithium-Ion Polymer Battery and Implications for Higher Capacity Next-Generation Battery Designs , 2003 .

[47]  Meng Guo,et al.  Mathematical Model for a Spirally-Wound Lithium-Ion Cell , 2014 .