Flow pattern, periodicity and energy dissipation in a batch rotor–stator mixer

Abstract The flow pattern and the distribution of energy dissipation rate in a batch rotor–stator mixer have been investigated. Sliding mesh and standard k–ɛ turbulence model were employed to predict velocity and energy dissipation rate distributions verified experimentally by the Laser Doppler Anemometry measurements. The agreement between predicted and measured bulk flow field as well as the flow pattern of jets emerging from the stator holes was very good. Results showed that the periodicity of the jet can be related to the rotor's velocity and number of blades. The energy balance based on measured velocity distribution indicated that about 70% of energy is dissipated in close proximity to the mixing head. Both simulation and measurement showed that the jet velocity and flowrate through the holes were proportional to N while the energy dissipation rate scaled with N3.

[1]  A. Bakker,et al.  Modelling of Turbulence in Stirred Vessels Using Large Eddy Simulation , 2004 .

[2]  Mark F. Reeder,et al.  Power draw of a high‐Shear homogenizer , 2001 .

[3]  Supathorn Phongikaroon,et al.  Measurement and Analysis of Drop Size in a Batch Rotor-Stator Mixer , 2000 .

[4]  Suzanne M. Kresta,et al.  Low frequency macroinstabilities in a stirred tank: scale-up and prediction based on large eddy simulations , 2003 .

[5]  Michael Yianneskis,et al.  Observations on the Distribution of Energy Dissipation in Stirred Vessels , 2000 .

[6]  H. Schubert,et al.  Developments in the continuous mechanical production of oil-in-water macro-emulsions , 1995 .

[7]  Sreenivas Jayanti,et al.  CFD Study of Power and Mixing Time for Paddle Mixing in Unbaffled Vessels , 2002 .

[8]  H. Nobach.  Local time estimation for the slotted correlation function of randomly sampled LDA data , 2002 .

[9]  S L Yeoh,et al.  Numerical Simulation of Turbulent Flow Characteristics in a Stirred Vessel Using the LES and RANS Approaches with the Sliding/Deforming Mesh Methodology , 2004 .

[10]  G. Ascanio,et al.  Hydrodynamics Characterization of Rotor-Stator Mixer with Viscous Fluids , 2005 .

[11]  Alvin W. Nienow,et al.  An LDA study of the radial discharge velocities generated by a Rushton turbine : Newtonian fluids, Re ≥ 5 , 1993 .

[12]  G. K. Patterson,et al.  Laser-Doppler measurements of turbulent-flow parameters in a stirred mixer , 1989 .

[13]  G. Zhou,et al.  Distribution of Energy Between Convective and Turbulent-Flow for 3 Frequently Used Impellers , 1996 .

[14]  M. Tummers,et al.  RAPID COMMUNICATION: Spectral estimation using a variable window and the slotting technique with local normalization , 1996 .

[15]  Mark F. Reeder,et al.  Get a fix on high-shear mixing , 1999 .