Development of dual PZT transducers for reference-free crack detection in thin plate structures

A new Lamb-wave-based nondestructive testing (NDT) technique, which does not rely on previously stored baseline data, is developed for crack monitoring in plate structures. Commonly, the presence of damage is identified by comparing "current data" measured from a potentially damaged stage of a structure with "baseline data" previously obtained at the intact condition of the structure. In practice, structural defects typically take place long after collection of the baseline data, and the baseline data can be also affected by external loading, temperature variations, and changing boundary conditions. To eliminate the dependence on the baseline data comparison, the authors previously developed a reference-free NDT technique using 2 pairs of collocated lead zirconate titanate (PZT) transducers placed on both sides of a plate. This reference-free technique is further advanced in the present study by the necessity of attaching transducers only on a single surface of a structure for certain applications such as aircraft. To achieve this goal, a new design of PZT transducers called dual PZT transducers is proposed. Crack formation creates Lamb wave mode conversion due to a sudden thickness change of the structure. This crack appearance is instantly detected from the measured Lamb wave signals using the dual PZT transducers. This study also suggests a reference-free statistical approach that enables damage classification using only the currently measured data set. Numerical simulations and experiments were conducted using an aluminum plate with uniform thickness and fundamental Lamb waves modes to demonstrate the applicability of the proposed technique to reference-free crack detection.

[1]  J. Rose,et al.  Ultrasonic guided wave scattering in a plate overlap , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[2]  S. Rokhlin Lamb wave interaction with lap-shear adhesive joints : theory and experiment , 1991 .

[3]  Hoon Sohn,et al.  An unsupervised learning algorithm for fatigue crack detection in waveguides , 2009 .

[4]  Paul D. Wilcox,et al.  Mode and Transducer Selection for Long Range Lamb Wave Inspection , 1999 .

[5]  Hoon Sohn,et al.  Reference-free crack detection using transfer impedances , 2010 .

[6]  Seth S. Kessler,et al.  Validation of a Lamb wave-based structural health monitoring system for aircraft applications , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7]  I. A. Viktorov Rayleigh and Lamb Waves , 1967 .

[8]  P. Cawley,et al.  The interaction of Lamb waves with defects , 1992, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[9]  Sauvik Banerjee,et al.  Analysis of transient Lamb waves generated by dynamic surface sources in thin composite plates , 2004 .

[10]  G. Tomlinson,et al.  Wavelet signal processing for enhanced Lamb-wave defect detection in composite plates using optical fiber detection , 1997 .

[11]  J. Achenbach,et al.  Self-calibrating ultrasonic technique for crack depth measurement , 1992 .

[12]  Hoon Sohn,et al.  Effects of environmental and operational variability on structural health monitoring , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[13]  Chun H. Wang,et al.  A synthetic time-reversal imaging method for structural health monitoring , 2004 .

[14]  F. Lanza di Scalea,et al.  Noncontact Air-Coupled Guided Wave Ultrasonics for Detection of Thinning Defects in Aluminum Plates , 2001 .

[15]  Brian Culshaw,et al.  Structural Damage Location with Fiber Bragg Grating Rosettes and Lamb Waves , 2007 .

[16]  Tribikram Kundu,et al.  An experimental investigation of guided wave propagation in corrugated plates showing stop bands and pass bands , 2006 .

[17]  F. Cegla,et al.  Analytical prediction and experimental measurement for mode conversion and scattering of plate waves at non-symmetric circular blind holes in isotropic plates , 2008 .

[18]  Younho Cho,et al.  Estimation of ultrasonic guided wave mode conversion in a plate with thickness variation , 2000, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[19]  Hoon Sohn,et al.  Instantaneous reference-free crack detection based on polarization characteristics of piezoelectric materials , 2007 .

[20]  H. Sohn,et al.  Understanding a time reversal process in Lamb wave propagation , 2009 .