Compliant actuator designs

In the growing fields of wearable robotics, rehabilitation robotics, prosthetics, and walking k robots, variable stiffness actuators (VSAs) or adjustable compliant actuators are being designed and implemented because of their ability to minimize large forces due to shocks, to safely interact with the user, and their ability to store and release energy in passive elastic elements. This review article describes the state of the art in the design of actuators with adaptable passive compliance. This new type of actuator is not preferred for classical position-controlled applications such as pick and place operations but is preferred in novel robots where safe human- robot interaction is required or in applications where energy efficiency must be increased by adapting the actuator's resonance frequency. The working principles of the different existing designs are explained and compared. The designs are divided into four groups: equilibrium-controlled stiffness, antagonistic-controlled stiffness, structure-controlled stiffness (SCS), and mechanically controlled stiffness.

[1]  J.J. Shea.  Electroactive polymers (EAP), vol. 600 [Book Review] , 2002, IEEE Electrical Insulation Magazine.

[2]  Jiaxin Wang,et al.  A Reinforcement Learning Based Dynamic Walking Control , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[3]  Stefano Stramigioli,et al.  Optimization of Mass and Stiffness Distribution for Efficient Bipedal Walking , 2005 .

[4]  Bram Vanderborght,et al.  An exoskeleton for gait rehabilitation: Prototype design and control principle , 2008, 2008 IEEE International Conference on Robotics and Automation.

[5]  R. V. Ham,et al.  ANTY: the development of an intelligent huggable robot for hospitalized children , 2006 .

[6]  Uri Tasch,et al.  A two-DOF manipulator with adjustable compliance capabilities and comparison with the human finger , 1996, J. Field Robotics.

[7]  Roger D. Quinn,et al.  Design and mechanics of an antagonistic biomimetic actuator system , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[8]  Stephen P. DeWeerth,et al.  Biologically Inspired Joint Stiffness Control , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[9]  Shigeki Sugano,et al.  Design and development of a new robot joint using a mechanical impedance adjuster , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[10]  H. van der Kooij,et al.  Design and Evaluation of the LOPES Exoskeleton Robot for Interactive Gait Rehabilitation , 2007, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[11]  Thomas G. Sugar,et al.  The SPARKy (Spring Ankle With Regenerative Kinetics) Project: Design and Analysis of a Robotic Transtibial Prosthesis With Regenerative Kinetics , 2007 .

[12]  Cynthia Breazeal,et al.  Design of a therapeutic robotic companion for relational, affective touch , 2005, ROMAN 2005. IEEE International Workshop on Robot and Human Interactive Communication, 2005..

[13]  Blake Hannaford,et al.  Measurement and modeling of McKibben pneumatic artificial muscles , 1996, IEEE Trans. Robotics Autom..

[14]  Anirban De,et al.  A two-DOF manipulator with adjustable compliance capabilities and comparison with the human finger , 1996 .

[15]  Masamichi Sakaguchi,et al.  Precise position control of robot arms using a homogeneous ER fluid , 1999 .

[16]  G. Hirzinger,et al.  A new variable stiffness design: Matching requirements of the next robot generation , 2008, 2008 IEEE International Conference on Robotics and Automation.

[17]  Antonio Bicchi,et al.  Fast and "soft-arm" tactics [robot arm design] , 2004, IEEE Robotics & Automation Magazine.

[18]  Matthew M. Williamson,et al.  Series elastic actuators , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[19]  Rajnikant V. Patel,et al.  Modeling and Control of Shape Memory Alloy Actuators , 2008, IEEE Transactions on Control Systems Technology.

[20]  Shinichi Hirai,et al.  Microfabricated tunable bending stiffness device , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[21]  Shigeki Sugano,et al.  Development of an anthropomorphic force-controlled manipulator WAM-10 , 1997, 1997 8th International Conference on Advanced Robotics. Proceedings. ICAR'97.

[22]  Antonio Bicchi,et al.  Design and Control of a Variable Stiffness Actuator for Safe and Fast Physical Human/Robot Interaction , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[23]  John Kenneth Salisbury,et al.  Playing it safe [human-friendly robots] , 2004, IEEE Robotics & Automation Magazine.

[24]  Thomas G Sugar,et al.  Design of a robotic gait trainer using spring over muscle actuators for ankle stroke rehabilitation. , 2005, Journal of biomechanical engineering.

[25]  J. S. Sulzer,et al.  MARIONET: An exotendon-driven rotary series elastic actuator for exerting joint torque , 2005, 9th International Conference on Rehabilitation Robotics, 2005. ICORR 2005..

[26]  Bram Vanderborght,et al.  The Pneumatic Biped “Lucy” Actuated with Pleated Pneumatic Artificial Muscles , 2005, Auton. Robots.

[27]  S. Kawamura,et al.  Development of passive elements with variable mechanical impedance for wearable robots , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[28]  K.W. Hollander,et al.  Adjustable robotic tendon using a 'Jack Spring'/spl trade/ , 2005, 9th International Conference on Rehabilitation Robotics, 2005. ICORR 2005..

[29]  Ieee Robotics,et al.  IEEE robotics & automation magazine , 1994 .

[30]  Joel E. Chestnutt,et al.  An actuator with physically variable stiffness for highly dynamic legged locomotion , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[31]  Fumihiko Asano,et al.  1P1-F01 Design Considerations for a Variable Stiffness Actuator in a Robot that Walks and Runs , 2007 .

[32]  R.W. Horst,et al.  FlexCVA: A Continuously Variable Actuator for Active Orthotics , 2006, 2006 International Conference of the IEEE Engineering in Medicine and Biology Society.

[33]  Russ Tedrake,et al.  Efficient Bipedal Robots Based on Passive-Dynamic Walkers , 2005, Science.

[34]  Alin Albu-Schäffer,et al.  Cartesian impedance control of redundant robots: recent results with the DLR-light-weight-arms , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[35]  S.K. Au,et al.  Biomechanical Design of a Powered Ankle-Foot Prosthesis , 2007, 2007 IEEE 10th International Conference on Rehabilitation Robotics.

[36]  Bram Vanderborght,et al.  MACCEPA, the mechanically adjustable compliance and controllable equilibrium position actuator: Design and implementation in a biped robot , 2007, Robotics Auton. Syst..

[37]  M. Morari,et al.  Robotic Orthosis Lokomat: A Rehabilitation and Research Tool , 2003, Neuromodulation : journal of the International Neuromodulation Society.

[38]  Bram Vanderborght,et al.  Development of a compliance controller to reduce energy consumption for bipedal robots , 2008, Auton. Robots.

[39]  Donald Russell,et al.  Mechanics and stiffness limitations of a variable stiffness actuator for use in prosthetic limbs , 1999 .

[40]  H. Herr,et al.  Adaptive control of a variable-impedance ankle-foot orthosis to assist drop-foot gait , 2004, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[41]  김재환.  Electroactive Polymers(EAP)의 연구동향 및 응용분야 , 2001 .

[42]  Robert Ilg,et al.  An efficient robotic tendon for gait assistance. , 2006, Journal of biomechanical engineering.

[43]  R. McN. Alexander,et al.  Three Uses for Springs in Legged Locomotion , 1990, Int. J. Robotics Res..

[44]  Joel E. Chestnutt,et al.  The Actuator With Mechanically Adjustable Series Compliance , 2010, IEEE Transactions on Robotics.

[45]  Chen Liang,et al.  Magnetostriction: revealing the unknown , 1996 .

[46]  Bram Vanderborght,et al.  MACCEPA, The mechanically adjustable compliance and controllable equilibrium position actuator: A 3DOF joint with two independent compliances , 2007 .

[47]  S.K. Au,et al.  Powered Ankle-Foot Prosthesis for the Improvement of Amputee Ambulation , 2007, 2007 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[48]  D. Herring,et al.  Adjustable Robotic Tendon using a ‘ Jack Spring ’ TM , 2005 .

[49]  Sunil Kumar Agrawal,et al.  Gravity-Balancing Leg Orthosis and Its Performance Evaluation , 2006, IEEE Transactions on Robotics.

[50]  K. Koganezawa,et al.  Stiffness and Angle Control of Antagonistially driven joint , 2006, The First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006. BioRob 2006..