Value-added conversion of waste cooking oil and post-consumer PET bottles into biodiesel and polyurethane foams.

A sustainable process of value-added utilization of wastes including waste cooking oil (WCO) and post-consumer PET bottles for the production of biodiesel and polyurethane (PU) foams was developed. WCO collected from campus cafeteria was firstly converted into biodiesel, which can be used as vehicle fuel. Then crude glycerol (CG), a byproduct of the above biodiesel process, was incorporated into the glycolysis process of post-consumer PET bottles collected from campus to produce polyols. Thirdly, PU foams were synthesized through the reaction of the above produced polyols with isocyanate in the presence of catalysts and other additives. The characterization of the produced biodiesel demonstrated that its properties meet the specification of biodiesel standard. The effect of crude glycerol loading on the properties of polyols and PU foams were investigated. All the polyols showed satisfactory properties for the production of rigid PU foams which had performance comparable to those of some petroleum-based analogs. A mass balance and a cost analysis for the conversion of WCO and waste PET into biodiesel and PU foams were also discussed. This study demonstrated the potential of WCO and PET waste for the production of value-added products.

[1]  Caixia Wan,et al.  Production and characterization of biopolyols and polyurethane foams from crude glycerol based liquefaction of soybean straw. , 2012, Bioresource technology.

[2]  W. Rymowicz,et al.  High-yield production of citric acid by Yarrowia lipolytica on glycerol in repeated-batch bioreactors , 2010, Journal of Industrial Microbiology & Biotechnology.

[3]  Johnathan E. Holladay,et al.  Top Value Added Chemicals From Biomass. Volume 1 - Results of Screening for Potential Candidates From Sugars and Synthesis Gas , 2004 .

[4]  M. Dubé,et al.  Biodiesel production from waste cooking oil: 2. Economic assessment and sensitivity analysis. , 2003, Bioresource technology.

[5]  M. G. Kulkarni,et al.  WASTE COOKING OIL – AN ECONOMICAL SOURCE FOR BIODIESEL: A REVIEW , 2006 .

[6]  L. C. Meher,et al.  Technical aspects of biodiesel production by transesterification—a review , 2006 .

[7]  J. Ackermann,et al.  Production of PHB from Crude Glycerol , 2007 .

[8]  D. Randall,et al.  Rigid polyurethane foam prepared from a rape seed oil based polyol , 2002 .

[9]  Xiaolan Luo,et al.  Thermochemical conversion of crude glycerol to biopolyols for the production of polyurethane foams. , 2013, Bioresource technology.

[10]  P. Hallenbeck,et al.  High yield conversion of a crude glycerol fraction from biodiesel production to hydrogen by photofermentation. , 2009, Bioresource technology.

[11]  A. Demirbas,et al.  Biodiesel from waste cooking oil via base-catalytic and supercritical methanol transesterification , 2009 .

[12]  Xiaolan Luo,et al.  Synthesis and Characterization of Polyols and Polyurethane Foams from PET Waste and Crude Glycerol , 2014, Journal of Polymers and the Environment.

[13]  Guanyi Chen,et al.  Biodiesel production from waste cooking oil via alkali catalyst and its engine test , 2008 .

[14]  Torsten Renz,et al.  Continuous cultivation approach for fermentative succinic acid production from crude glycerol by Basfia succiniciproducens DD1 , 2009, Biotechnology Letters.

[15]  R. Makuška,et al.  Synthesis and physical-mechanical properties of polyurethane-polyisocyanurate foams based on PET-waste-derived modified polyols , 2011 .

[16]  M. Cunha,et al.  Beef tallow biodiesel produced in a pilot scale , 2009 .

[17]  Duane T. Johnson,et al.  The glycerin glut: Options for the value‐added conversion of crude glycerol resulting from biodiesel production , 2007 .

[18]  K. Raju,et al.  Synthesis and characterization of hyperbranched polyester–urethane–urea/K10-clay hybrid coatings , 2009 .

[19]  T. Spychaj,et al.  Rigid polyurethane foams with poly(ethylene terephthalate)/triethanolamine recycling products , 1999 .

[20]  R. Howard-Hildige,et al.  The effect of steam treating waste cooking oil on the yield of methyl ester , 2002 .

[21]  V. Sinha,et al.  Pet Waste Management by Chemical Recycling: A Review , 2010 .

[22]  A. McAloon,et al.  A process model to estimate biodiesel production costs. , 2006, Bioresource technology.

[23]  A. Demharter.  Polyurethane rigid foam, a proven thermal insulating material for applications between +130°C and −196°C , 1998 .

[24]  John Sheehan,et al.  Life cycle inventory of biodiesel and petroleum diesel for use in an urban bus. Final report , 1998 .

[25]  Saurabh Chaudhary,et al.  Microwave assisted glycolysis of poly(ethylene terepthalate) for preparation of polyester polyols , 2013 .

[26]  Mali Hunsom,et al.  Purification of crude glycerol derived from waste used-oil methyl ester plant , 2010 .

[27]  Wei Wang,et al.  Microbial production of 1,3-propanediol by Klebsiella pneumoniae using crude glycerol from biodiesel preparations , 2006, Biotechnology Letters.

[28]  G. Wiltsee,et al.  Urban Waste Grease Resource Assessment , 1999 .

[29]  M. M. A. Nikjeh,et al.  Regeneration of Polyol by Pentaerythritol-assisted Glycolysis of Flexible Polyurethane Foam Wastes , 2010 .

[30]  Naresh Pachauri,et al.  Value-added Utilization of Crude Glycerol from Biodiesel Production: A Survey of Current Research Activities , 2006 .

[31]  M. Kunaver,et al.  Water‐blown polyurethane/polyisocyanurate foams made from recycled polyethylene terephthalate and liquefied wood‐based polyester polyol , 2015 .

[32]  Baek-Rock Oh,et al.  Optimization of culture conditions for 1,3-propanediol production from crude glycerol by Klebsiella pneumoniae using response surface methodology , 2008 .