CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

Edge coupler is a key component of silicon-based optoelectronic chips, which dramatically reduces the coupling loss between fibers and transmission waveguides. Here, we propose an ultralow-loss three-step silicon edge coupler based on a 130 nm CMOS process. By replacing the silicon substrate with a material with a lower refractive index than silicon oxide, the silicon leakage loss and polarization-dependent loss can be significantly improved. This structure avoids the existence of a cantilever, which enhances the mechanical strength of the edge coupler. Coupling with standard single-mode fiber, the simulation results demonstrate that the TE/TM mode has an ultralow loss of 0.63/1.08 dB at 1310 nm and 0.57/1.34 dB at 1550 nm, and the 0.5 dB bandwidth covering the entire communication band is about 400 nm. In the entire communication band, the polarization-dependent loss is less than 0.8 dB. Furthermore, we propose a taper shape design method based on mode analysis, which can be adapted for any taper to improve its compactness. Compared with the parabolic shape, the coupling loss of the edge coupler with a length of 460 μm for the TE mode is improved by 0.3 dB on average, this edge coupler provides a feasible solution for fiber-to-chip coupling and is perfectly suitable for wavelength division multiplexing applications in optical communications.

[1]  Jiwei Huang,et al.  CMOS-compatible, broadband, and polarization-independent edge coupler for efficient chip coupling with standard single-mode fiber. , 2022, Applied optics.

[2]  Liying Wu,et al.  Polarization Insensitive Edge Coupler Assisted by Subwavelength Grating and Suspended Structure , 2022, IEEE Photonics Technology Letters.

[3]  Yikai Su,et al.  Ultracompact Fiber-to-Chip Metamaterial Edge Coupler , 2021, ACS Photonics.

[4]  Sang‐Shin Lee,et al.  Compact Edge-Coupler for Broadband and High-Efficient Fiber-to-Waveguide Coupling Using Cascaded Silicon Nitride Tapers , 2021, 2021 Opto-Electronics and Communications Conference (OECC).

[5]  T. Busani,et al.  Stress and Refractive Index Control of SiO2 Thin Films for Suspended Waveguides , 2020, Nanomaterials.

[6]  Pengxin Chen,et al.  Low-cost and high-efficiency single-mode-fiber interfaces to silicon photonic circuits , 2020 .

[7]  P. Saint‐Cast,et al.  The effects of carbon incorporation on the refractive index of PECVD silicon oxide layers , 2020 .

[8]  Manfred Berroth,et al.  Ultra-Efficient Silicon-on-Insulator Grating Couplers With Backside Metal Mirrors , 2020, IEEE Journal of Selected Topics in Quantum Electronics.

[9]  W. Ye,et al.  Efficient TE/TM spot-size converter for broadband coupling to single mode fibers , 2019, OSA Continuum.

[10]  A. Brimont,et al.  Fiber-to-Chip Spot-Size Converter for Coupling to Silicon Waveguides in the O-Band , 2019, IEEE Photonics Technology Letters.

[11]  Kyungmok Kwon,et al.  High-efficiency broadband light coupling between optical fibers and photonic integrated circuits , 2018, Nanophotonics.

[12]  Guo-Qiang Lo,et al.  Efficient Suspended Coupler With Loss Less Than −1.4 dB Between Si-Photonic Waveguide and Cleaved Single Mode Fiber , 2018, Journal of Lightwave Technology.

[13]  Joris Van Campenhout,et al.  Ultra-broadband, polarization-insensitive SMF-28 fiber edge couplers for silicon photonics , 2017, 2017 IEEE CPMT Symposium Japan (ICSJ).

[14]  Mo Mojahedi,et al.  Demonstration of a compact bilayer inverse taper coupler for Si-photonics with enhanced polarization insensitivity. , 2016, Optics express.

[15]  Xianshu Luo,et al.  Low Loss Fiber-to-Waveguide Converter With a 3-D Functional Taper for Silicon Photonics , 2016, IEEE Photonics Technology Letters.

[16]  Pavel Cheben,et al.  Ideal, constant-loss nanophotonic mode converter using a Lagrangian approach. , 2016, Optics express.

[17]  Marie-Josee Picard,et al.  CMOS-compatible spot-size converter for optical fiber to sub-μm silicon waveguide coupling with low-loss low-wavelength dependence and high tolerance to misalignment , 2016, SPIE OPTO.

[18]  Y. Arakawa,et al.  A Hybrid Integrated Light Source on a Silicon Platform Using a Trident Spot-Size Converter , 2014, Journal of Lightwave Technology.

[19]  Emiko Omoda,et al.  Silicon knife-edge taper waveguide for ultralow-loss spot-size converter fabricated by photolithography , 2013 .

[20]  Manfred Berroth,et al.  Cost-effective CMOS-compatible grating couplers with backside metal mirror and 69% coupling efficiency. , 2012, Optics express.

[21]  Guanghui Ren,et al.  Study on inverse taper based mode transformer for low loss coupling between silicon wire waveguide and lensed fiber , 2011 .

[22]  H. Ohmi,et al.  Low refractive index silicon oxide coatings at room temperature using atmospheric-pressure very high-frequency plasma , 2010 .

[23]  E. Sleeckx,et al.  Highly efficient grating coupler between optical fiber and silicon photonic circuit , 2009, 2009 Conference on Lasers and Electro-Optics and 2009 Conference on Quantum electronics and Laser Science Conference.

[24]  R. Soref,et al.  The Past, Present, and Future of Silicon Photonics , 2006, IEEE Journal of Selected Topics in Quantum Electronics.

[25]  B. Jalali,et al.  Silicon Photonics , 2006, Journal of Lightwave Technology.

[26]  T. Krauss,et al.  Compact and Highly Efficient Grating Couplers Between Optical Fiber and Nanophotonic Waveguides , 2007, Journal of Lightwave Technology.