Comparative analysis of the reliability of grid-connected photovoltaic power systems

This study compares the reliability performance of string inverter structure and central inverter structure for grid-tied solar photovoltaic (PV) systems. The impact of input power variation and ambient-conditions on failure rates of PV system components are quantified and incorporated in the reliability analysis. Aging failure in PV panels is also modeled to evaluate the life cycle reliability of both types of PV systems. Sensitivity analyses are extensively conducted to explore the impact of different factors on the performances of different PV systems. Test results on a practical 20 kW PV project are presented to demonstrate the effectiveness of the presented method.

[1]  P. Lall,et al.  Tutorial: temperature as an input to microelectronics-reliability models , 1996, IEEE Trans. Reliab..

[2]  Maria Gabriella Masi,et al.  Toward a BITE for Real-Time Life Estimation of Capacitors Subjected to Thermal Stress , 2011, IEEE Transactions on Instrumentation and Measurement.

[3]  Yang Wang,et al.  Reliability Evaluation of Grid-Connected Photovoltaic Power Systems , 2012, IEEE Transactions on Sustainable Energy.

[4]  L.H. Stember,et al.  A Methodology for Photovoltaic System Reliability & Economic Analysis , 1982, IEEE Transactions on Reliability.

[5]  Mounira Berkani,et al.  Ageing and Failure Modes of IGBT Modules in High-Temperature Power Cycling , 2011, IEEE Transactions on Industrial Electronics.

[6]  Sairaj V. Dhople,et al.  Integrating photovoltaic inverter reliability into energy yield estimation with Markov models , 2010, 2010 IEEE 12th Workshop on Control and Modeling for Power Electronics (COMPEL).

[7]  Pedro Ibañez,et al.  Intelligent PV Module for Grid-Connected PV Systems , 2006, IEEE Transactions on Industrial Electronics.

[8]  R. W. De Doncker,et al.  Reliability Prediction for Inverters in Hybrid Electrical Vehicles , 2007 .

[9]  Ajeet Rohatgi,et al.  Impact of inverter configuration on PV system reliability and energy production , 2002, Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002..

[10]  S. Clemente.  A simple tool for the selection of IGBTs for motor drives and UPSs , 1995, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95.

[11]  N. Henze,et al.  Reliability Consideration of Low-Power Grid-Tied Inverter for Photovoltaic Application , 2009 .

[12]  P. E. James T. P. Yao,et al.  Probability, Reliability and Statistical Methods in Engineering Design , 2001 .

[13]  Zhaohui Luo,et al.  A thermal model for insulated gate bipolar transistor module , 2004, IEEE Transactions on Power Electronics.

[14]  Elmer Collins,et al.  Reliability and availability analysis of a fielded photovoltaic system , 2009, 2009 34th IEEE Photovoltaic Specialists Conference (PVSC).

[15]  Ajeet Rohatgi,et al.  Development of a Methodology for Improving Photovoltaic Inverter Reliability , 2008, IEEE Transactions on Industrial Electronics.

[16]  Weidong Xiao,et al.  Topology Study of Photovoltaic Interface for Maximum Power Point Tracking , 2007, IEEE Transactions on Industrial Electronics.

[17]  Sam G. Parler,et al.  Deriving Life Multipliers for Electrolytic Capacitors , 2004 .

[18]  E. E. van Dyk,et al.  Assessing the reliability and degradation of photovoltaic module performance parameters , 2004, IEEE Transactions on Reliability.

[19]  M. Vázquez,et al.  Photovoltaic module reliability model based on field degradation studies , 2008 .

[20]  W. Li,et al.  Incorporating Aging Failures in Power System Reliability Evaluation , 2002, IEEE Power Engineering Review.

[21]  M. Veerachary,et al.  Reliability Issues in Photovoltaic Power Processing Systems , 2008, IEEE Transactions on Industrial Electronics.