Representation and Modelling of Processes

[1]  C. Gourdon,et al.  Influence of the meandering channel geometry on the thermo-hydraulic performances of an intensified heat exchanger/reactor , 2013 .

[2]  Laurent Lefèvre,et al.  Pseudo-spectral methods for the spatial symplectic reduction of open systems of conservation laws , 2012, J. Comput. Phys..

[3]  Belkacem Ould Bouamama,et al.  Bond graphs for the diagnosis of chemical processes , 2012, Comput. Chem. Eng..

[4]  Vanessa Díaz-Zuccarini,et al.  On the formalization of multi-scale and multi-science processes for integrative biology , 2011, Interface Focus.

[5]  Intensification of Heat Transfer in Chemical Reactors: Heat Exchanger Reactors , 2010 .

[6]  Alexandre E. Kronberg,et al.  Heat transfer study of the pulsed compression reactor , 2010 .

[7]  M. Meyer,et al.  Hydrodynamic and mass transfer efficiency of ceramic foam packing applied to distillation , 2009 .

[8]  Jean-Claude Charpentier,et al.  Perspective on multiscale methodology for product design and engineering , 2009, Comput. Chem. Eng..

[9]  Karsten-Ulrich Klatt,et al.  Perspectives for process systems engineering - Personal views from academia and industry , 2009, Comput. Chem. Eng..

[10]  Françoise Couenne,et al.  Structure-preserving infinite dimensional model reduction: Application to adsorption processes , 2009 .

[11]  Michel Cabassud,et al.  Heat exchanger/reactors (HEX reactors) : Concepts, technologies: State-of-the-art , 2008 .

[12]  Bernhard Maschke,et al.  Bond graph for dynamic modelling in chemical engineering , 2008 .

[13]  Douglas Carson,et al.  Evaluation of an intensified continuous heat-exchanger reactor for inherently safer characteristics , 2008 .

[14]  Rafiqul Gani,et al.  Use of CAPE-OPEN standards in the interoperability between modelling tools (MoT) and process simulators (Simulis® Thermodynamics and ProSimPlus) , 2008 .

[15]  Bernhard Maschke,et al.  Structured modeling for processes: A thermodynamical network theory , 2008, Comput. Chem. Eng..

[16]  L. Lefévre,et al.  Port based modelling of a multiscale adsorption column , 2008 .

[17]  I. T. Cameron,et al.  A survey of industrial process modelling across the product and process lifecycle , 2008, Comput. Chem. Eng..

[18]  Johan Grievink,et al.  Process intensification and process systems engineering: A friendly symbiosis , 2008, Comput. Chem. Eng..

[19]  Delphine Dumas,et al.  Intensification of the solvent-free catalytic hydroformylation of cyclododecatriene: Comparison of a stirred batch reactor and a heat-exchange reactor , 2007 .

[20]  C. Jallut,et al.  A Multi‐Scale Dynamic Mechanistic Model for the Transient Analysis of PEFCs , 2007 .

[21]  Julie Zimmerman,et al.  Design Through the 12 Principles of Green Engineering , 2003, IEEE Engineering Management Review.

[22]  Rafiqul Gani,et al.  Computer-aided multiscale modelling for chemical process engineering , 2007 .

[23]  Günter Wozny,et al.  Production of n-Propyl Acetate by Reactive Distillation: Experimental and Theoretical Study , 2007 .

[24]  Patrice Tochon,et al.  Micromixing enhancement by turbulence: Application to multifunctional heat exchangers , 2006 .

[25]  Patrice Tochon,et al.  Open loop thermal control of exothermal chemical reactions in multifunctional heat exchangers , 2006 .

[26]  A. I. Stankiewicz,et al.  Energy Matters: Alternative Sources and Forms of Energy for Intensification of Chemical and Biochemical Processes , 2006 .

[27]  Remi Saisset,et al.  Bond Graph model of a PEM fuel cell , 2006 .

[28]  Bernhard Maschke,et al.  Bond graph modelling for chemical reactors , 2006 .

[29]  Dominique Toye,et al.  Imaging of liquid distribution in reactive distillation packings with a new high-energy x-ray tomograph , 2005 .

[30]  S. Kolaczkowski,et al.  Liquid-phase oxidation of organic feedstock in a compact multichannel reactor , 2005 .

[31]  Michel Cabassud,et al.  Performance Evaluation of a Novel Concept “Open Plate Reactor” Applied to Highly Exothermic Reactions , 2005 .

[32]  Achim Kienle,et al.  Computer-Aided Modeling of Chemical and Biological Systems: Methods, Tools, and Applications , 2005 .

[33]  Xuân-Mi Meyer,et al.  Preliminary Design of Reactive Distillation Columns , 2005 .

[34]  H. Hasse,et al.  Thermodynamics of phase and chemical equilibrium in a strongly nonideal esterification system , 2005 .

[35]  A. Kannan,et al.  Holdup and pressure drop studies in structured packings with catalysts , 2004 .

[36]  W. Luyben,et al.  Design and Control of Conventional and Reactive Distillation Processes for the Production of Butyl Acetate , 2004 .

[37]  Arjan van der Schaft,et al.  Hamiltonian discretization of boundary control systems , 2004, Autom..

[38]  A. Kolodziej,et al.  Mass transfer and hydraulics for KATAPAK-S , 2004 .

[39]  W. Arlt,et al.  Determination of binary vapor–liquid equilibria (VLE) of three fast reacting esterification systems , 2004 .

[40]  Eugeny Y. Kenig,et al.  Catalytic distillation for tame synthesis with structured catalytic packings , 2004 .

[41]  Wolfgang Marquardt,et al.  Management and Reuse of Mathematical Models in the Industrial Design Process , 2004 .

[42]  Robert S. Huss,et al.  Green chemical engineering aspects of reactive distillation. , 2003, Environmental science & technology.

[43]  Alexandre C. Dimian,et al.  Fatty acid esterification by reactive distillation. Part 1: equilibrium-based design , 2003 .

[44]  Jürgen Gmehling,et al.  Esterification of a Fatty Acid by Reactive Distillation , 2003 .

[45]  A. F. Seibert,et al.  Performance characteristics of a new high capacity structured packing , 2003 .

[46]  U. Hoffmann,et al.  Experimental Reaction Equilibrium and Kinetics of the Liquid‐phase Butyl Acrylate Synthesis Applied to Reactive Distillation Simulations , 2002 .

[47]  Jürgen Gmehling,et al.  n-Butyl Acetate Synthesis via Reactive Distillation: Thermodynamic Aspects, Reaction Kinetics, Pilot-Plant Experiments, and Simulation Studies , 2002 .

[48]  Ernst Dieter Gilles,et al.  A network theory for the structured modelling of chemical processes , 2002 .

[49]  K. Sundmacher,et al.  Synthesis of cylohexanol by three-phase reactive distillation: influence of kinetics on phase equilibria , 2002 .

[50]  Jean-Pierre Belaud,et al.  Open Software Architecture For Process Simulation: The Current Status of CAPE-OPEN Standard , 2002 .

[51]  M. Meyer,et al.  Catalytic distillation modeling , 2002 .

[52]  A. Górak,et al.  Determination of catalytic packing characteristics for reactive distillation , 2001 .

[53]  Peter Moritz,et al.  Reactive distillation with KATAPAK , 2001 .

[54]  Wolfgang Marquardt,et al.  Computer-aided process modeling with MODKIT , 2001 .

[55]  Jean-Pierre Belaud,et al.  Open software architecture for numerical solvers : design, implementation and validation , 2001 .

[56]  M. Doherty,et al.  Prediction of heterogeneous reactive azeotropes in esterification systems , 2000 .

[57]  Ho-mu Lin,et al.  Kinetics of Catalytic Esterification of Acetic Acid and Amyl Alcohol over Dowex , 2000 .

[58]  Ernst Dieter Gilles,et al.  PROMOT: A Modeling Tool for Chemical Processes , 2000 .

[59]  Peter C. Breedveld.  On state-event constructs in physical system dynamics modeling , 1999, Simul. Pract. Theory.

[60]  S. Goto,et al.  Dehydration of tert-Butyl Alcohol in Reactive Distillation , 1999 .

[61]  Heinz A. Preisig,et al.  Concept and design of Modeller, a computer-aided modelling tool , 1999 .

[62]  Rajamani Krishna,et al.  Counter-current operation of structured catalytically packed distillation columns: pressure drop, holdup and mixing , 1999 .

[63]  T. Okuhara,et al.  Liquid phase esterification of acrylic acid with 1-butanol catalyzed by solid acid catalysts , 1999 .

[64]  Hilding Elmqvist,et al.  Physical system modeling with Modelica , 1998 .

[65]  Ernst Dieter Gilles.  Network Theory for Chemical Processes , 1998 .

[66]  B. Bessling,et al.  Design of Processes with Reactive Distillation Line Diagrams , 1997 .

[67]  Pio A. Aguirre,et al.  Some Aspects in the Design of Multicomponent Reactive Distillation Columns with a Reacting Core: Mixtures Containing Inerts , 1996 .

[68]  H. Bart,et al.  Kinetics of esterification of acetic acid with propyl alcohol by heterogeneous catalysis , 1996 .

[69]  R.W.H. Sargent,et al.  Computer generation of process models , 1996 .

[70]  Wolfgang Marquardt,et al.  Trends in computer-aided process modeling , 1996 .

[71]  Paul I. Barton,et al.  Modeling of combined discrete/continuous processes , 1994 .

[72]  Mats Andersson,et al.  Object-Oriented Modelling and Simulation , 1993 .

[73]  Peter J. Gawthrop,et al.  Systematic construction of dynamic models for phase equilibrium processes , 1991 .

[74]  Gabriela P. Henning,et al.  MODEL.LA. A modeling language for process engineering—I. The formal framework , 1990 .

[75]  Gabriela P. Henning,et al.  MODEL.LA. A modeling language for process engineering—II. Multifaceted modeling of processing systems , 1990 .

[76]  Domingos Barbosa,et al.  Design and minimum-reflux calculations for single-feed multicomponent reactive distillation columns , 1988 .

[77]  Pieter C. Breedveld,et al.  Thermodynamic Bond Graphs: A New Synthesis , 1981 .

[78]  Dean Karnopp.  On the Order of a Physical System Model , 1979 .

[79]  S. Lo,et al.  Experimental study on the optimum performance of an adiabatic MT reactor , 1972 .