Suspensions shape impact on the reliability of ohmic RF-MEMS redundancy switches

The influence of the suspension shape on the electrical parameters and on the reliability of micro-machined ohmic series and shunt RF switches has been studied in this work. We have investigated how different spring constants influence the electrical parameters of RF-MEMS switches, in terms of the pull-in voltage, the pull-out voltage, and the evolution of scattering parameters during the DC sweep. The robustness to cycling stress has also been studied, considering different movable structures and bias voltages. We have also analyzed the behavior of RF-MEMS switches submitted to long continuous actuation, finding that meander based devices could suffer from extremely long release times, after an actuation period of some hours. However, straight beam based switches have not exhibited this problem. This unwanted behavior has been analyzed in terms of actuation time and RF-power level. The presence of bounces in the release phase has also been investigated on various types of switches with different topologies and suspended membrane thickness.

[1]  Viale Risorgimento,et al.  Interdigitated Low-Loss Ohmic RF-MEMS Switches , 2004 .

[2]  I. De Wolf,et al.  Experimental characterization of stiction due to charging in RF MEMS , 2002, Digest. International Electron Devices Meeting,.

[3]  R. Gaddi,et al.  Reliability Issues in RF-MEMS Switches Submitted to Cycling and ESD Test , 2006, 2006 IEEE International Reliability Physics Symposium Proceedings.

[4]  J. Volakis,et al.  Effect of nanoscale heating on electrical transport in RF MEMS switch contacts , 2005, Journal of Microelectromechanical Systems.

[5]  C. Goldsmith,et al.  High-Cycle Life Testing of RF MEMS Switches , 2007, 2007 IEEE/MTT-S International Microwave Symposium.

[6]  Gabriel M. Rebeiz.  RF MEMS: Theory, Design and Technology , 2003 .

[7]  Robert B. Mason,et al.  Micro-electromechanical Systems (MEMS) Reliability Assessment Program for Department of Defense Activities , 2005 .

[8]  H. Newman,et al.  Lifetime Measurements on a High-Reliability RF-MEMS Contact Switch , 2008, IEEE Microwave and Wireless Components Letters.

[9]  Robert Plana.  What's hot in rf components and systems , 2006 .

[10]  G. Meneghesso,et al.  Electrostatic Discharge and Cycling Effects on Ohmic and Capacitive RF-MEMS Switches , 2007, IEEE Transactions on Device and Materials Reliability.