Configuration of a shear web based actuation system

Shape adaptive systems and structural configurations are necessary to fulfill the demands of a future unmanned aerial vehicle structure. Predominantly the present approaches are based on a passive load-bearing structure having smart actuation systems deforming the passive structural configuration elastically in the wanted shape. Therefore the actuation system can be based on discrete actuators, like electrically driven motors using gearing systems to transform the displacement into the structure or on smart material configurations placed on the load bearing passive structure, deforming the structure within the elastic region into the wanted shape. Using smart materials within load-bearing structures, elastic and static strength properties vary between passive and active structures. Matching these properties is a great challenge for future structural configurations. This is a successful approach for certain applications, e.g. smart rotor blade. The availability of two-dimensional smart actuator configurations with distinct actuation orientation allows the definition of a distinct load bearing active structure. Therefore the so called "web" of a spar-equivalent configuration was substituted by such a smart material actuator also known as macro fiber composite (MFC). Activating the web of the active cantilevered spar-configuration is resulting in a free end displacement. The main advantage lies in the fact that this approach will allow larger active displacements in comparison to a passive structural configuration with applied smart material actuators. Within the paper the process of developing the shear web based actuation system with configuration details will be illustrated and future steps will be proposed.

[1]  D. Sachau,et al.  Belt-rib concept for variable-camber airfoils: recent developments , 2000, Smart Structures.

[2]  Aaron Alton Bent,et al.  Active fiber composites for structural actuation , 1997 .

[3]  Victor Giurgiutiu,et al.  Review of Smart-Materials Actuation Solutions for Aeroelastic and Vibration Control , 2000 .

[4]  Johannes Riemenschneider,et al.  Testing and Simulation of an Active Twist Rotor Blade , 2007 .

[5]  R. Williams.  Nonlinear Mechanical and Actuation Characterization of Piezoceramic Fiber Composites , 1999 .

[6]  Jonathan D. Bartley-Cho,et al.  Development of High-rate, Adaptive Trailing Edge Control Surface for the Smart Wing Phase 2 Wind Tunnel Model , 2004 .

[7]  Dietmar Müller,et al.  Das Hornkonzept : Realisierung eines formvariablen Tragflügelprofils zur aerodynamischen Leistungsoptimierung zukünftiger Verkehrsflugzeuge , 2000 .

[8]  J. N. Kudva,et al.  Overview of the DARPA Smart Wing Project , 2004 .

[9]  P. Wierach,et al.  Bauweisen und Anwendungen von Piezokompositen in der Adaptronik , 2005 .

[10]  Johannes Riemenschneider,et al.  OVERVIEW OF THE COMMON DLR/ONERA PROJECT "ACTIVE TWIST BLADE" (ATB) , 2004 .

[11]  Hans Peter Monner,et al.  Realization of an optimized wing camber by using formvariable flap structures , 2001 .

[12]  Peter Wierach,et al.  Smart composites based on piezoceramic tubes , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[13]  Douglas K. Lindner,et al.  Power Systems and Requirements for Integration of Smart Structures into Aircraft , 2004 .

[14]  Terrence A. Weisshaar,et al.  Aeroelastic Studies on a Folding Wing Configuration , 2005 .