Effects of material interfaces in Cu/low-/spl kappa/ damascene interconnects on their performance and reliability

The performance and reliability of Cu/Low-/spl kappa/ damascene interconnects are investigated from the view point of the material interface structure. We are focusing especially on the heterointerfaces between the Cu and the barrier metal (BM), as well as between the hard mask (HM) and the capping barrier dielectrics (CAP) covered on the Cu interconnects. It is found that the highest via reliabilities of electromigration (EM) and thermal cycle are established by the barrier-metal-free (BMF) structure without the heterointerface between the Cu and the BM due to the strong Cu-to-Cu connection at the via bottom. The interline time-dependant dielectric breakdown lifetime is improved mostly by using a HM with the same materials as the CAP layer, referred to as an unified structure, which diminishes the heterointerface between the HM and the CAP. These ideal structures without the material heterointerfaces derive the highest reliability and performance. Structural control of the material heterointerfaces in the actual Cu/low-/spl kappa/ damascene interconnect is crucial for the high reliability and performance.

[1]  Yoshihiro Hayashi,et al.  Highly thermal-stable, plasma-polymerized BCB polymer film (k=2.6) for Cu dual-damascene interconnects , 2000, 2000 Symposium on VLSI Technology. Digest of Technical Papers (Cat. No.00CH37104).

[2]  Y. Homma,et al.  Time-Dependent Dielectric Breakdown of Interlevel Dielectrics for Copper Metallization. , 1996 .

[3]  P. Ho,et al.  Leakage current degradation and carrier conduction mechanisms for Cu/BCB damascene process under bias-temperature stress , 1999, 1999 IEEE International Reliability Physics Symposium Proceedings. 37th Annual (Cat. No.99CH36296).

[4]  Kenichi Takeda,et al.  Effect of NH/sub 3/-plasma treatment and CMP modification on TDDB improvement in Cu metallization , 2001 .

[5]  Glenn A. Rinne,et al.  Passivation schemes for copper/polymer thin film interconnections used in multichip modules , 1992, 1992 Proceedings 42nd Electronic Components & Technology Conference.

[6]  K. Takeda,et al.  Enhanced dielectric breakdown lifetime of the copper/silicon nitride/silicon dioxide structure , 1998, 1998 IEEE International Reliability Physics Symposium Proceedings. 36th Annual (Cat. No.98CH36173).

[7]  Y. Hayashi,et al.  A new pad-scanning, local-CMP (PASCAL-CMP) technique for reliable Cu-damascene interconnect formation , 1999, Proceedings of the IEEE 1999 International Interconnect Technology Conference (Cat. No.99EX247).

[8]  Yoshihiro Hayashi,et al.  Damascene Cu-interconnect formation in benzocyclobuten (BCB) film using a novel end-point monitoring technique , 1998, Advanced Lithography.

[9]  W. Mckee,et al.  Leakage and breakdown reliability issues associated with low-k dielectrics in a dual-damascene Cu process , 2000, 2000 IEEE International Reliability Physics Symposium Proceedings. 38th Annual (Cat. No.00CH37059).

[10]  M. Bohr.  Interconnect scaling-the real limiter to high performance ULSI , 1995, Proceedings of International Electron Devices Meeting.

[11]  T. Kikkawa,et al.  Barrier metal free copper damascene interconnection technology using atmospheric copper reflow and nitrogen doping in SiOF film , 1996, International Electron Devices Meeting. Technical Digest.

[12]  S. Wong,et al.  Kinetics of copper drift in low-/spl kappa/ polymer interlevel dielectrics , 1999 .

[13]  K. Motoyama,et al.  Reliability improvement of Cu/low-k dual damascene interconnects using the depo/etch barrier process by newly developed I-PVD , 2002, Proceedings of the IEEE 2002 International Interconnect Technology Conference (Cat. No.02EX519).

[14]  Ronald J. Gutmann,et al.  Copper/Benzocyclobutene Interconnects for Sub‐100 nm Integrated Circuit Technology: Elimination of High‐Resistivity Metallic Liners and High‐Dielectric Constant Polish Stops , 1999 .

[15]  R. Kirchhoff,et al.  Benzocyclobutenes in polymer synthesis , 1992 .

[16]  S.C. Sun,et al.  Process technologies for advanced metallization and interconnect systems , 1997, International Electron Devices Meeting. IEDM Technical Digest.

[17]  Yoshihiro Hayashi,et al.  Effect of stress control layer (SCL) on via-stability in organic low-k/Cu dual damascene interconnects under thermal cycle stress , 2003, Proceedings of the IEEE 2003 International Interconnect Technology Conference (Cat. No.03TH8695).

[18]  P. Roper,et al.  Full copper wiring in a sub-0.25 /spl mu/m CMOS ULSI technology , 1997, International Electron Devices Meeting. IEDM Technical Digest.

[19]  James P. Godschalx,et al.  Development of a Low‐Dielectric‐Constant Polymer for the Fabrication of Integrated Circuit Interconnect , 2000 .

[20]  D. Klaus,et al.  A high performance liner for copper damascene interconnects , 2001, Proceedings of the IEEE 2001 International Interconnect Technology Conference (Cat. No.01EX461).

[21]  U. Schubert,et al.  A copper drift-model for the low-/spl kappa/ polymer DVS-BCB , 2000, Proceedings of the IEEE 2000 International Interconnect Technology Conference (Cat. No.00EX407).

[22]  J. J. Clement,et al.  Electromigration in copper conductors , 1995 .

[23]  Y. Hayashi,et al.  Cu dual damascene interconnects with in-situ fluorinated carbon-nitride (FCN: -C=N(F)-) barrier layers in low-k organic film , 2002, Digest. International Electron Devices Meeting,.

[24]  Y. Hayashi,et al.  Layered Ta-nitrides (LTN) barrier film by power swing sputtering (PSS) technique for MOCVD-Cu damascene interconnects , 1999, International Electron Devices Meeting 1999. Technical Digest (Cat. No.99CH36318).

[25]  S. Saito,et al.  A high reliability copper dual-damascene interconnection with direct-contact via structure , 2000, International Electron Devices Meeting 2000. Technical Digest. IEDM (Cat. No.00CH37138).

[26]  V. Blaschke,et al.  Conduction processes in Cu/low-K interconnection , 2000, 2000 IEEE International Reliability Physics Symposium Proceedings. 38th Annual (Cat. No.00CH37059).

[27]  Yoshihiro Hayashi,et al.  Highly thermal-stable, plasma-polymerized BCB polymer film , 2003 .