A series expansion method aided design of CCII controller for a TITO system

Current mode circuits have attracted the attention of the design engineers due to their unique characteristics that are not found in their voltage mode counterparts. This article presents a series expansion method based design of current mode circuits for the control of a two input two output (TITO) system. The unique contribution of this work is the realization of the TITO controller using the second generation current conveyor circuits. The controller was practically implemented using AD844 integrated circuits. Simulation and the experimental results are presented for a pragmatic case study to demonstrate the efficacy of the proposed design methodology.

[1]  Lei Guo,et al.  Anti-disturbance control theory for systems with multiple disturbances: a survey. , 2014, ISA transactions.

[2]  Worapong Tangsrirat,et al.  Current-mode multiphase sinusoidal oscillator using CDTA-based allpass sections , 2009 .

[3]  B M Patre,et al.  Decentralized PI/PID controllers based on gain and phase margin specifications for TITO processes. , 2012, ISA transactions.

[4]  Muhammad Taher Abuelma'atti.  Current-mode multiphase oscillator using current followers , 1994 .

[5]  Christofer Toumazou,et al.  Analogue IC design : the current-mode approach , 1993 .

[6]  Shahram Minaei,et al.  A simple low voltage, high output impedance resistor based current mirror with extremely low input and output voltage requirements , 2016, 2016 39th International Conference on Telecommunications and Signal Processing (TSP).

[7]  Chyi Hwang,et al.  An efficient FFT-based algorithm for power series expansions , 1997 .

[8]  Katsuhiko Ogata,et al.  Modern Control Engineering , 1970 .

[9]  A. S. Sedra,et al.  The current conveyor: history and progress , 1989, IEEE International Symposium on Circuits and Systems,.

[10]  Saeed Tavakoli,et al.  Tuning of decentralised PI (PID) controllers for TITO processes , 2006 .

[11]  Jing Xu,et al.  A new current-mode current-controlled SIMO-type universal filter , 2011 .

[12]  F. Anday,et al.  Voltage transfer function synthesis using current conveyors , 1989 .

[13]  D. P. Atherton,et al.  PID Controller Design for a TITO System , 1993, 1993 American Control Conference.

[14]  Fırat Kaçar,et al.  Band-pass filter with high quality factor based on current differencing transconductance amplifier and current amplifier , 2017 .

[15]  Worapong Tangsrirat,et al.  Multiple-input single-output current-mode multifunction filter using current differencing transconductance amplifiers , 2007 .

[16]  Hassan Elwan,et al.  Low Voltage Digitally Controlled CMOS Current Conveyor , 2002 .

[17]  Sajal K. Paul,et al.  Comb Filter for Elimination of Unwanted Power Line Interference in Biomedical Signal , 2016, J. Circuits Syst. Comput..

[18]  D. Patranabis,et al.  Integrators and differentiators with current conveyors , 1984 .

[19]  Benjamin C. Kuo,et al.  AUTOMATIC CONTROL SYSTEMS , 1962, Universum:Technical sciences.

[20]  K. Smith,et al.  A second-generation current conveyor and its applications , 1970, IEEE Transactions on Circuit Theory.

[21]  Neeta Pandey,et al.  Single-Input Four-Output Current Mode Filter Using Operational Floating Current Conveyor , 2013 .

[22]  Wang,et al.  Auto-tuning of TITO decoupling controllers from step tests , 2000, ISA transactions.

[23]  Hakan Kuntman,et al.  A CURRENT CONTROLLED CONVEYOR BASED PROPORTIONAL-INTEGRAL-DERIVATIVE (PID) CONTROLLER , 2004 .

[24]  B. Wilson,et al.  Recent developments in current conveyors and current-mode circuits , 1990 .

[25]  P. Aronhime,et al.  Transfer-function synthesis using a current conveyor , 1974 .