Development of micromachined hollow tips for protein analysis based on nanoelectrospray ionization mass spectrometry

Two novel types of micromachined nanoelectrospray emitter tips have been designed, fabricated and tested. The fabrication method of the hollow tips is based on a self-aligning deep reactive ion etch process. The tips consist of either silicon dioxide or silicon and feature orifice diameters of 10 and 18 μm, respectively. The geometrical characteristics of both emitter types are favorable for the generation of stable electrospray ionization, i.e. wetting of the tip shaft is avoided and the base of the Taylor cone is limited to the diameter of the orifice. A silicon dioxide tip was operated in a bench top setup to visually evaluate the electrospray. Both types of tips were also successfully used for the analysis of an insulin sample in an ion trap mass spectrometer.

[1]  Geoffrey Ingram Taylor,et al.  Disintegration of water drops in an electric field , 1964, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[2]  R. C. Mobley,et al.  Molecular Beams of Macroions , 1968 .

[3]  J. Fenn,et al.  Electrospray ion source: another variation on the free-jet theme , 1984 .

[4]  M. Mann,et al.  Of protons or proteins , 1988 .

[5]  M. Wilm,et al.  Electrospray and Taylor-Cone theory, Dole's beam of macromolecules at last? , 1994 .

[6]  F. McLafferty,et al.  Attomole-sensitivity electrospray source for large-molecule mass spectrometry. , 1995, Analytical chemistry.

[7]  M. Wilm,et al.  Analytical properties of the nanoelectrospray ion source. , 1996, Analytical chemistry.

[8]  J. Ramsey,et al.  Generating electrospray from microchip devices using electroosmotic pumping. , 1997, Analytical chemistry.

[9]  P. Zavracky,et al.  Multichannel microchip electrospray mass spectrometry. , 1997, Analytical chemistry.

[10]  R. Aebersold,et al.  A microfabricated device for rapid protein identification by microelectrospray ion trap mass spectrometry. , 1997, Analytical chemistry.

[11]  R. Aebersold,et al.  Nanoflow solvent gradient delivery from a microfabricated device for protein identifications by electrospray ionization mass spectrometry. , 1998, Analytical chemistry.

[12]  C. Colyer,et al.  Integration of microfabricated devices to capillary electrophoresis-electrospray mass spectrometry using a low dead volume connection: application to rapid analyses of proteolytic digests. , 1999, Analytical chemistry.

[13]  B. Karger,et al.  Microfabricated devices for capillary electrophoresis-electrospray mass spectrometry. , 1999, Analytical chemistry.

[14]  D. J. Harrison,et al.  Microfluidic devices connected to fused-silica capillaries with minimal dead volume. , 1999, Analytical chemistry.

[15]  K. R. Williams,et al.  Novel interconnection technologies for integrated microfluidic systems , 1998 .

[16]  D. Jed Harrison,et al.  Analytical microdevices for mass spectrometry , 2000 .

[17]  Yuehe Lin,et al.  Microfabricated isoelectric focusing device for direct electrospray ionization‐mass spectrometry , 2000, Electrophoresis.

[18]  Corso,et al.  A fully integrated monolithic microchip electrospray device for mass spectrometry , 2000, Analytical chemistry.

[19]  Y. Tai,et al.  A micromachined chip-based electrospray source for mass spectrometry. , 2000, Analytical chemistry.

[20]  Peter Enoksson,et al.  Micromachined electrodes for biopotential measurements , 2001 .

[21]  Sequential electrospray analysis using sharp-tip channels fabricated on a plastic chip , 2001 .

[22]  D. Knapp,et al.  Microfabricated PDMS multichannel emitter for electrospray ionization mass spectrometry , 2001, Journal of the American Society for Mass Spectrometry.

[23]  D R Knapp,et al.  Microfabrication of polydimethylsiloxane electrospray ionization emitters. , 2001, Journal of chromatography. A.