A Dual Half-Bridge Phase-Shifted Converter With Wide ZVZCS Switching Range

This paper presents a phase-shifted dual-half-bridge converter, which achieves zero-voltage switching (ZVS) for the leading-leg switches and zero-current switching (ZCS) for the lagging-leg switches. The proposed converter contains two paralleled half-bridge inverters in the primary side. The rectifier stage is composed of six diodes connected with the form of full-bridge rectification. The ZVS condition is created by the output filter inductor and leakage inductor, while the ZCS condition is created by the blocking capacitors. A wide range of soft-switching operation can be achieved with small leakage inductors. Compared with the traditional phase-shifted full-bridge converter, the proposed converter can obtain a three-level output rectified voltage, and the power is transferred from the primary side to the secondary side during the whole period, which can significantly reduce the current ripple of the output filter inductor. In this paper, the operation principle and relevant analysis are presented. A laboratory prototype is built to verify the performance of the proposed converter.

[1]  Xinbo Ruan,et al.  Zero-Voltage and Zero-Current-Switching PWM Combined Three-Level DC/DC Converter , 2010, IEEE Transactions on Industrial Electronics.

[2]  Gun-Woo Moon,et al.  Soft-Switching DC/DC Converter With a Full ZVS Range and Reduced Output Filter for High-Voltage Applications , 2013, IEEE Transactions on Power Electronics.

[3]  Xinbo Ruan,et al.  Zero-voltage and zero-current-switching PWM hybrid full-bridge three-level converter , 2005, IEEE Trans. Ind. Electron..

[4]  Song-Yi Lin,et al.  Analysis and design for RCD clamped snubber used in output rectifier of phase-shift full-bridge ZVS converters , 1998, IEEE Trans. Ind. Electron..

[5]  Lei Zhao,et al.  Operation analysis of a phase-shifted full-bridge converter during the dead-time interval , 2016 .

[6]  J. A. Sabate,et al.  Zero-voltage and zero-current-switching full bridge PWM converter for high power applications , 1994, Proceedings of 1994 Power Electronics Specialist Conference - PESC'94.

[7]  Eun-Soo Kim,et al.  A ZVZCS PWM FB DC/DC converter using a modified energy-recovery snubber , 2002, IEEE Trans. Ind. Electron..

[8]  Fred C. Lee,et al.  Zero voltage and zero current switching full bridge PWM converter using secondary active clamp , 1996 .

[9]  Il-Oun Lee,et al.  Hybrid PWM-Resonant Converter for Electric Vehicle On-Board Battery Chargers , 2016, IEEE Transactions on Power Electronics.

[10]  Xinbo Ruan,et al.  A novel zero-voltage and zero-current-switching PWM full-bridge converter using two diodes in series with the lagging leg , 2001, IEEE Trans. Ind. Electron..

[11]  Dong-Wook Yoo,et al.  Novel zero-voltage and zero-current-switching full bridge PWM converter using transformer auxiliary winding , 2000 .

[12]  Jih-Sheng Lai,et al.  Zero-Voltage-Switching PWM Resonant Full-Bridge Converter With Minimized Circulating Losses and Minimal Voltage Stresses of Bridge Rectifiers for Electric Vehicle Battery Chargers , 2013, IEEE Transactions on Power Electronics.

[13]  Yen-Shin Lai,et al.  New Integrated Control Technique for Two-Stage Server Power to Improve Efficiency Under the Light-Load Condition , 2015, IEEE Transactions on Industrial Electronics.

[14]  Bin Gu,et al.  Hybrid-Switching Full-Bridge DC–DC Converter With Minimal Voltage Stress of Bridge Rectifier, Reduced Circulating Losses, and Filter Requirement for Electric Vehicle Battery Chargers , 2013, IEEE Transactions on Power Electronics.

[15]  Jih-Sheng Lai,et al.  Hybrid Resonant and PWM Converter With High Efficiency and Full Soft-Switching Range , 2012, IEEE Transactions on Power Electronics.

[16]  Gyu-Hyeong Cho,et al.  Zero-voltage and zero-current switching full bridge DC-DC converter for arc welding machines , 1999 .

[17]  P. K. Jain,et al.  A Novel ZVZCS Full-Bridge DC/DC Converter Used for Electric Vehicles , 2012, IEEE Transactions on Power Electronics.

[18]  A. Bakhshai,et al.  A ZVS Pulsewidth Modulation Full-Bridge Converter With a Low-RMS-Current Resonant Auxiliary Circuit , 2016, IEEE Transactions on Power Electronics.

[19]  F. Lee,et al.  Zero voltage and zero current switching full bridge PWM converter using secondary active clamp , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[20]  Bong-Hwan Kwon,et al.  An improved zero-voltage and zero-current-switching full-bridge PWM converter using a simple resonant circuit , 2001, IEEE Trans. Ind. Electron..

[21]  Gun-Woo Moon,et al.  Wide-Range ZVS Phase-Shift Full-Bridge Converter With Reduced Conduction Loss Caused by Circulating Current , 2013, IEEE Transactions on Power Electronics.

[22]  Youhao Xi,et al.  Analysis and design considerations of a load and line independent zero voltage switching full bridge DC/DC converter topology , 2002 .

[23]  F.C. Lee,et al.  Design considerations for high-voltage high-power full-bridge zero-voltage-switched PWM converter , 1990, Fifth Annual Proceedings on Applied Power Electronics Conference and Exposition.

[24]  G. Cho,et al.  A zero-voltage and zero-current switching full bridge DC-DC converter with transformer isolation , 2001 .

[25]  Jung-Goo Cho,et al.  Novel zero-voltage and zero-current-switching full-bridge PWM converter using a simple auxiliary circuit , 1999 .

[26]  Feng Ji,et al.  A novel ZVS full-bridge converter with auxiliary circuit , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[27]  A. K. S. Bhat,et al.  A Comparison of Soft-Switched DC-to-DC Converters for Electrolyzer Application , 2013, IEEE Transactions on Power Electronics.

[28]  Zhong Chen,et al.  Mechanism and suppression countermeasure of voltage oscillation for full bridge converter , 2012, Proceedings of The 7th International Power Electronics and Motion Control Conference.

[29]  Jianhua Wang,et al.  An Inherent Zero-Voltage and Zero-Current-Switching Full-Bridge Converter with No Additional Auxiliary Circuits , 2015 .

[30]  Jae Seung Lee,et al.  A High-Density, High-Efficiency, Isolated On-Board Vehicle Battery Charger Utilizing Silicon Carbide Power Devices , 2014, IEEE Transactions on Power Electronics.

[31]  Gun-Woo Moon,et al.  Voltage Oscillation Reduction Technique for Phase-Shift Full-Bridge Converter , 2007, IEEE Transactions on Industrial Electronics.

[32]  Gun-Woo Moon,et al.  Phase-Shifted PWM Converter With a Wide ZVS Range and Reduced Circulating Current , 2013, IEEE Transactions on Power Electronics.

[33]  Z. Ye Dual Half-Bridge DC–DC Converter With Wide-Range ZVS and Zero Circulating Current , 2013, IEEE Transactions on Power Electronics.

[34]  Xiaogao Xie,et al.  Low Voltage and Current Stress ZVZCS Full Bridge DC–DC Converter Using Center Tapped Rectifier Reset , 2008, IEEE Transactions on Industrial Electronics.

[35]  X. Dianguo,et al.  A novel zero-voltage and zero-current-switching full-bridge PWM converter , 2003, IECON'03. 29th Annual Conference of the IEEE Industrial Electronics Society (IEEE Cat. No.03CH37468).