Epoxy formulation including an acrylic triblock copolymer adapted for use in filament winding

Commercial triblock copolymers with a poly(butyl acrylate) (PBuA) central block joined to two poly(methyl methacrylate) (PMMA) end blocks (denoted as MAM) or to two random copolymers end blocks based on MMA and N,N′-dimethylacrylamide (DMA) (denoted as MAM-N), can be employed as toughening agents for thermoset composites. However, their use in epoxy formulations for filament winding, requiring low viscosities during the fiber-impregnation step associated with an adequate glass transition temperature of the cured product is not trivial. In this study, we show that a blend of diglycidylether of bisphenol A (DGEBA), 4,4′-diamino-3,3′-dimethyldicyclohexylmethane (3DCM) and benzylamine (BA), with 20% of amine hydrogens provided by BA, and containing 5 wt% MAM, can be used for these purposes. The addition of MAM increased the critical stress intensity factor from 0.63 MPa.m1/2 to 1.0 MPa.m1/2, the glass transition temperature from 138°C to 145°C, and the glassy modulus at 25°C from 2.95 GPa to 3.15 GPa. MAM was a better choice for the envisaged applications than MAM-N because it led to solutions of lower viscosity. The higher viscosity produced by MAM-N was explained by specific interactions between the epoxy-amine solvent and DMA units present in its terminal blocks. POLYM. ENG. SCI., 2016. © 2016 Society of Plastics Engineers

[1]  Y. Nakashima,et al.  Control of nanostructures generated in epoxy matrices blended with PMMA-b-PnBA-b-PMMA triblock copolymers , 2015 .

[2]  P. Viot,et al.  Preparation and mechanical characterisation of laminate composites made of glass fibre/epoxy resin filled with tri bloc copolymers , 2014 .

[3]  L. Francis,et al.  Effect of block copolymer concentration and core composition on toughening epoxies , 2014 .

[4]  U. Sundararaj,et al.  Morphology and mechanical properties of nanostructured acrylic tri‐block‐copolymer modified epoxy , 2014 .

[5]  P. Viot,et al.  Effect of block copolymer nano-reinforcements on the low velocity impact response of sandwich structures , 2014 .

[6]  I. Zucchi,et al.  From spherical micelles to hexagonally packed cylinders: the cure cycle determines nanostructures generated in block copolymer/epoxy blends , 2013 .

[7]  U. Sundararaj,et al.  Mode-I interlaminar fracture behaviour of nanoparticle modified epoxy/basalt fibre-reinforced laminates , 2013 .

[8]  U. Sundararaj,et al.  Microstructure and mechanical properties of epoxy hybrid nanocomposites modified with acrylic tri-block-copolymer and layered-silicate nanoclay , 2012 .

[9]  Philippe Viot,et al.  The influence of acrylate triblock copolymer embedded in matrix on composite structures’ responses to low-velocity impacts , 2012 .

[10]  L. Francis,et al.  Role of Localized Network Damage in Block Copolymer Toughened Epoxies. , 2012, ACS macro letters.

[11]  Y. Morishita,et al.  Nano-phase structures and mechanical properties of epoxy/acryl triblock copolymer alloys , 2011 .

[12]  U. Sundararaj,et al.  Study of matrix micro-cracking in nano clay and acrylic tri-block-copolymer modified epoxy/basalt fiber-reinforced pressure-retaining structures , 2011 .

[13]  F. Bates,et al.  Toughening of Epoxies with Block Copolymer Micelles of Wormlike Morphology , 2010 .

[14]  J. Pascault,et al.  Epoxy polymers : new materials and innovations , 2010 .

[15]  F. Léonardi,et al.  All acrylic block copolymers based on poly (methyl methacrylate) and poly (butyl acrylate). A link between the physico-chemical properties and the mechanical behaviour on impact tests , 2008 .

[16]  A. Ryan,et al.  Toughening by nanostructure , 2008 .

[17]  J. Pascault,et al.  Toughness Properties of Lightly Crosslinked Epoxies Using Block Copolymers , 2007 .

[18]  Raymond A. Pearson,et al.  Epoxies toughened with triblock copolymers , 2007 .

[19]  Zhiguang Xu,et al.  Reaction-Induced Microphase Separation in Epoxy Thermosets Containing Poly(∊-caprolactone)-block-poly(n-butyl acrylate) Diblock Copolymer , 2007 .

[20]  J. Pascault,et al.  Nanostructured Epoxies Based on the Self-Assembly of Block Copolymers: A New Miscible Block That Can Be Tailored to Different Epoxy Formulations , 2007, 1311.5439.

[21]  F. Bates,et al.  Epoxy toughening using low molecular weight poly(hexylene oxide)-poly(ethylene oxide) diblock copolymers , 2006 .

[22]  F. Bates,et al.  Structure and properties of PBO–PEO diblock copolymer modified epoxy , 2005 .

[23]  F. Bates,et al.  Nanostructure Toughened Epoxy Resins , 2003 .

[24]  I. Zucchi,et al.  Thermodynamic analysis of the reaction-induced phase separation in model systems based on blends of a rubber in diepoxide / monoamine precursors , 2003 .

[25]  J. Pascault,et al.  Influence of epoxy hardener on miscibility of blends of poly(methyl methacrylate) and epoxy networks , 2000 .

[26]  C. Pichot,et al.  Epoxy networks toughened by core-shell particles : Influence of the particle structure and size on the rheological and mechanical properties , 1999 .

[27]  M. El-Aasser,et al.  The role of dispersed phase morphology on toughening of epoxies , 1997 .

[28]  J. Pascault,et al.  Reaction-induced phase separation in modified thermosetting polymers , 1997 .

[29]  Reza Bagheri,et al.  Role of blend morphology in rubber-toughened polymers , 1996, Journal of Materials Science.

[30]  Xiaoyin Xie,et al.  Anionic Synthesis of Narrow Molecular Weight Distribution Water-Soluble Poly(N,N-dimethylacrylamide) and Poly(N-acryloyl-N ‘-methylpiperazine) , 1996 .

[31]  A. Kinloch,et al.  Toughened plastics I : science and engineering , 1993 .

[32]  C. Bucknall,et al.  Blends of poly(methyl methacrylate) with epoxy resin and an aliphatic amine hardener , 1993 .

[33]  J. K. Gillham,et al.  Rubber-Modified Thermoset Resins , 1984 .

[34]  F. Mcgarry,et al.  Effect of rubber particle size on deformation mechanisms in glassy epoxy , 1973 .