Determination of specific surface area of irregular aggregate by random sectioning and its comparison with conventional methods

Abstract A two-dimensional (2D) image-based methodology was proposed to measure the specific surface area (SSA, specified as the surface area per unit volume) of irregular aggregate by random sectioning. Conventional methods including spherical assumption, Brunauer-Emmett-Teller (BET) and computed tomography (CT) tests were used and compared in this study. Results show that spherical assumption provides the lowest SSA among these methods since the feature of anisotropy in dimension is not considered. SSA by BET test has one order of magnitude higher value than others, which is attributed to the fact that BET method measures each position of particles that nitrogen molecule can be adsorbed on during the applied relative pressure, based on the ‘pixel’ of nitrogen molecule. The proposed random sectioning method presents very similar SSA result compared to CT method, indicating that it can be considered as a reliable method. To improve the estimation of SSA by random sectioning method, factors that may influence SSA result were analyzed. Results indicate that the number of samples should be high enough to reach a constant result and the thresholding algorithm should be adequate. Besides, a higher resolution of pixel provides a higher SSA value. The comparison among these methods demonstrate that it is necessary to determine the scale at which the features of the surface are supposed to be captured before selecting the optimal testing method.

[1]  R. Flatt,et al.  Reliable specific surface area measurements on anhydrous cements , 2015 .

[2]  Edward J. Garboczi,et al.  Filler from crushed aggregate for concrete: Pore structure, specific surface, particle shape and size distribution , 2014 .

[3]  Tiao Wang,et al.  A comparison of the specific surface area of fly ash measured by image analysis with conventional methods , 2018, Construction and Building Materials.

[4]  Francis Butler,et al.  A comparison of seven thresholding techniques with the k-means clustering algorithm for measurement of bread-crumb features by digital image analysis , 2006 .

[5]  N. Otsu.  A threshold selection method from gray level histograms , 1979 .

[6]  M. Alexander,et al.  Aggregates in Concrete , 2005 .

[7]  E. Landis,et al.  X-ray microtomography , 2010 .

[8]  Edward J. Garboczi,et al.  Measurement of particle size distribution and specific surface area for crushed concrete aggregate fines , 2017 .

[9]  R. Ketcham,et al.  Acquisition, optimization and interpretation of X-ray computed tomographic imagery: applications to the geosciences , 2001 .

[10]  Andrew K. C. Wong,et al.  A new method for gray-level picture thresholding using the entropy of the histogram , 1985, Comput. Vis. Graph. Image Process..

[11]  David W. Fowler,et al.  Some properties of irregular 3-D particles , 2006 .

[12]  Josef Kittler,et al.  On threshold selection using clustering criteria , 1985, IEEE Transactions on Systems, Man, and Cybernetics.

[13]  S. Erdoğan.  Simple Estimation of the Surface Area of Irregular 3D Particles , 2016 .

[14]  C. Smith,et al.  Measurement of Internal Boundaries in Three-Dimensional Structures By Random Sectioning , 1953 .

[15]  Rong Luo,et al.  Modifying the BET model for accurately determining specific surface area and surface energy components of aggregates , 2018, Construction and Building Materials.

[16]  M. Colbert,et al.  Applications of high-resolution X-ray computed tomography in petrology, meteoritics and palaeontology , 2003, Geological Society, London, Special Publications.

[17]  Menashi D. Cohen,et al.  INFLUENCE OF AGGREGATE SURFACE AREA ON MECHANICAL PROPERTIES OF MORTAR , 1999 .

[18]  Hui-sheng Shi,et al.  Microstructural characterization of ITZ in blended cement concretes and its relation to transport properties , 2016 .

[19]  Hui Zhang,et al.  Utilization of low-quality desulfurized ash from semi-dry flue gas desulfurization by mixing with hemihydrate gypsum , 2019, Fuel.

[20]  Lihai Zhang,et al.  Influence of aggregate surface treatment on corrosion resistance of cement composite under chloride attack , 2020 .

[21]  Zheng-wu Jiang,et al.  Role of Limestone Powder in Early-Age Cement Paste Considering Fineness Effects , 2020 .

[22]  Nick R. Buenfeld,et al.  Pore Segmentation of Cement-based Materials from Backscattered Electron Images , 2006 .

[23]  Zheng-wu Jiang,et al.  Functionalization of renewable bamboo charcoal to improve indoor environment quality in a sustainable way , 2020 .

[24]  Mao-Jiun J. Wang,et al.  Image thresholding by minimizing the measures of fuzzines , 1995, Pattern Recognit..

[25]  I. Odler.  The BET-specific surface area of hydrated Portland cement and related materials , 2003 .

[26]  Ritesh Panda,et al.  An empirical method for estimating surface area of aggregates in hot mix asphalt , 2016 .

[27]  A. Ćwirzeń,et al.  Exploring the relation between the flow of mortar and specific surface area of its constituents , 2019, Construction and Building Materials.

[28]  L. G. Li,et al.  Combined effects of water film, paste film and mortar film thicknesses on fresh properties of concrete , 2014 .

[30]  Thierry Chotard,et al.  Application of X-ray computed tomography to characterise the early hydration of calcium aluminate cement , 2003 .

[31]  Liguang Xiao,et al.  The study of pervious concrete mix proportion by the method of specific surface area of aggregate , 2017 .

[32]  Peter R. Mouton,et al.  Unbiased Stereology: A Concise Guide , 2011 .

[33]  C. Dunant,et al.  A new quantification method based on SEM-EDS to assess fly ash composition and study the reaction of its individual components in hydrating cement paste , 2015 .

[34]  Zheng-wu Jiang,et al.  Cement-based composite with humidity adsorption and formaldehyde removal functions as an indoor wall material , 2020 .

[35]  Quantification of the Specific Aggregate Surface Area Using X-Ray Tomography , 2003 .

[36]  V. Cnudde,et al.  Software tools for quantification of X-ray microtomography at the UGCT , 2007 .

[37]  G. de Schutter,et al.  Multi-level diffusion model for manufactured sand mortar considering particle shape and limestone powder effects , 2019, Construction and Building Materials.

[38]  J. Chermant,et al.  Image analysis and mathematical morphology for civil engineering materials , 2001 .

[39]  E. Teller,et al.  ADSORPTION OF GASES IN MULTIMOLECULAR LAYERS , 1938 .

[40]  Yahya Ghasemi,et al.  Estimation of specific surface area of particles based on size distribution curve , 2017 .

[41]  Veerle Cnudde,et al.  HECTOR: A 240kV micro-CT setup optimized for research , 2013 .

[42]  Qiang Ren,et al.  Performance and ITZ of pervious concrete modified by vinyl acetate and ethylene copolymer dispersible powder , 2020, Construction and Building Materials.

[43]  R. Townsend,et al.  A Method for Determining the Surface Area of Quarried Rocks , 1991 .

[44]  Luc Courard,et al.  Determination of particle size, surface area, and shape of supplementary cementitious materials by different techniques , 2015 .