Statistical Analysis of Weigh-in-Motion Data for Bridge Design in Vermont

DISCLAIMER The contents of this report reflect the views of the authors, who are responsible for the facts and the accuracy of the information presented herein. This document is disseminated under the sponsorship of the Department of Transportation University Transportation Centers Program, in the interest of information exchange. The U.S. Government assumes no liability for the contents or use thereof. Acknowledgements The author would like to acknowledge funding from USDOT thru the University Transportation Center (UTC) program at the University of Vermont and from the Vermont Agency of Transportation. Disclaimer The contents of this report reflect the views of the authors, who are responsible for the facts and the accuracy of the data presented herein. The contents do not necessarily reflect the official view or policies of the UVM Transportation Research Center or of the funding agencies. This report does not constitute a standard, specification, or regulation.

[1]  Robert Johnson,et al.  Structural Analysis , 2020, Multiphysics Modeling with Application to Biomedical Engineering.

[2]  Oh-Sung Kwon,et al.  Calibration of Live-Load Factor in LRFD Bridge Design Specifications Based on State-Specific Traffic Environments , 2011 .

[3]  Anthony C. Davison,et al.  Statistics of Extremes , 2015, International Encyclopedia of Statistical Science.

[4]  Shiling Pei,et al.  Buckling Reliability of Deteriorating Steel Beam Ends , 2006 .

[5]  Geoffrey J. McLachlan,et al.  Characteristic traffic load effects from a mixture of loading events on short to medium span bridges , 2008 .

[6]  Baidurya Bhattacharya,et al.  Probabilistic Characterization of Live Load Using Visual Counts and In-Service Strain Monitoring , 2007 .

[7]  Eugene J. O'Brien,et al.  Using Weigh-in-Motion Data to Determine Aggressiveness of Traffic for Bridge Loading , 2013 .

[8]  Robert E. Melchers,et al.  Structural Reliability: Analysis and Prediction , 1987 .

[9]  Henry B. Seaman.  Specifications for the Design of Bridges and Subways , 1912 .

[10]  John W. van de Lindt,et al.  Locality of Truck Loads and Adequacy of Bridge Design Load , 2005 .

[11]  Marek Kozikowski,et al.  WIM based live load model for bridge reliability , 2009 .

[12]  Mark G. Stewart,et al.  Time-dependent reliability of deteriorating reinforced concrete bridge decks , 1998 .

[13]  M. F.,et al.  Bibliography , 1985, Experimental Gerontology.

[14]  Habib Tabatabai,et al.  Evaluation of a Permit Vehicle Model Using Weigh-in-Motion Truck Records , 2012 .

[15]  Eugene J. O'Brien,et al.  Monte Carlo simulation of extreme traffic loading on short and medium span bridges , 2013 .

[16]  Simon F. Bailey,et al.  Site specific probability distribution of extreme traffic action effects , 1999 .

[17]  K Close,et al.  AMERICAN ASSOCIATION OF STATE HIGHWAY AND TRANSPORTATION OFFICIALS COMPUTER SYSTEMS INDEX , 1976 .

[18]  Andrzej S. Nowak,et al.  CALIBRATION OF LRFD BRIDGE DESIGN CODE , 1999 .

[19]  François Toutlemonde,et al.  Applying Weigh-in-motion traffic data to reliability based assessment of bridge structures , 2013 .

[20]  Sami W. Tabsh,et al.  RELIABILITY OF HIGHWAY GIRDER BRIDGES , 1991 .

[21]  Geoffrey J. McLachlan,et al.  Mixture models : inference and applications to clustering , 1989 .