Geometry of human ribs pertinent to orthopedic chest-wall reconstruction.

Orthopedic reconstruction of blunt chest trauma can aid restoration of pulmonary function to reduce the mortality associated with serial rib fractures and flail chest injuries. Contemporary chest wall reconstruction requires contouring of generic plates to the complex surface geometry of ribs. This study established a biometric foundation to generate specialized, anatomically contoured osteosynthesis hardware for rib fracture fixation. On human cadaveric ribs three through nine, the surface geometry pertinent to anatomically conforming osteosynthesis plates was characterized by quantifying the apparent rib curvature C(A), the longitudinal twist alpha(LT) along the diaphysis, and the unrolled curvature C(U). In addition, the rib cross-sectional geometry pertinent to intramedullary fixation strategies was characterized in terms of cross-section height, width, area, and cortex thickness. The rib surface exhibited a curvature C(A) ranging from 3.8 m(-1) in the anteromedial section of rib seven to 17.3 m(-1) in the posterior section of rib three. All ribs had in common a longitudinal twist alpha(LT), ranging from 41-60 degrees. The unrolled curvature C(U) decreased gradually from ribs three to five, and increased gradually with reversed orientation from rib six to nine. The cross-sectional area remained constant along the rib diaphysis. However, the medullary canal increased in size from 29.9 mm(2) posteriorly to 41.2 mm(2) in anterior rib segments. Results of this biometric rib characterization describe a novel strategy for intraoperative plate contouring and provide a foundation for the development of specialized rib osteosynthesis strategies.

[1]  A B Schultz,et al.  Force-deformation properties of human ribs. , 1974, Journal of biomechanics.

[2]  E. Hoffman,et al.  Geometry and respiratory displacement of human ribs. , 1987, Journal of applied physiology.

[3]  Joel D Stitzel,et al.  Regional variation in the structural response and geometrical properties of human ribs. , 2005, Annual proceedings. Association for the Advancement of Automotive Medicine.

[4]  A. Schultz,et al.  Force-deformation properties of human costo-sternal and costo-vertebral articulations. , 1974, Journal of biomechanics.

[5]  G. Velmahos,et al.  Influence of flail chest on outcome among patients with severe thoracic cage trauma. , 2002, International surgery.

[6]  Yvan Petit,et al.  Assessment of the 3-D reconstruction and high-resolution geometrical modeling of the human skeletal trunk from 2-D radiographic images , 2003, IEEE Transactions on Biomedical Engineering.

[7]  P. Schüpbach,et al.  [Therapy of the unstable thorax in serial fractures of the ribs]. , 1978, Schweizerische medizinische Wochenschrift.

[8]  K. Schmit-Neuerburg,et al.  [Indications for thoracotomy and rib stabilization in thoracic trauma in the aged]. , 1980, Der Chirurg; Zeitschrift fur alle Gebiete der operativen Medizen.

[9]  C. Feng,et al.  Finite element analysis in the human thorax. , 1977, Journal of biomechanics.

[10]  B. Regli,et al.  Long-Term Follow-up of Patients with Operative Stabilisation of a Flail Chest , 1997, The Thoracic and cardiovascular surgeon.

[11]  Y Nosé,et al.  Human thoracic anatomy based on computed tomography for development of a totally implantable left ventricular assist system. , 1984, Artificial organs.

[12]  H. Matsuda,et al.  Surgical stabilization of internal pneumatic stabilization? A prospective randomized study of management of severe flail chest patients. , 2002, The Journal of trauma.

[13]  H. Ris,et al.  Osteosynthesis of the injured chest wall. Use of the AO (Arbeitsgemeinschaft für Osteosynthese) technique. , 1993, Scandinavian journal of thoracic and cardiovascular surgery.

[14]  J. R. Oyarzun,et al.  Use of 3.5-mm acetabular reconstruction plates for internal fixation of flail chest injuries. , 1998, The Annals of thoracic surgery.

[15]  Z. Ahmed,et al.  Management of flail chest injury: internal fixation versus endotracheal intubation and ventilation. , 1995, The Journal of thoracic and cardiovascular surgery.

[16]  W. Long,et al.  Operative chest wall fixation with osteosynthesis plates. , 2005, The Journal of trauma.

[17]  Max Mignotte,et al.  Three-dimensional biplanar reconstruction of scoliotic rib cage using the estimation of a mixture of probabilistic prior models , 2005, IEEE Transactions on Biomedical Engineering.

[18]  K. Schmit-Neuerburg,et al.  Indication for thoracotomy and chest wall stabilization. , 1982, Injury.

[19]  K. Dv.  Operative management of the flail chest. , 1997 .

[20]  Karl Heinrich von Bardeleben,et al.  Handbuch der Anatomie des Menschen , 1896 .

[21]  B. Wack,et al.  [Surgical treatment of flail chest by sliding staples]. , 1985, Revue de chirurgie orthopedique et reparatrice de l'appareil moteur.

[22]  P. Giannoudis,et al.  Operative stabilisation of painful non-united multiple rib fractures. , 2001, Injury.

[23]  I A Stokes,et al.  Measurements of the three-dimensional shape of the rib cage. , 1988, Journal of biomechanics.

[24]  J. Richardson,et al.  Painful nonunion of multiple rib fractures managed by operative stabilization. , 2000, The Journal of trauma.

[25]  G. Haasler.  Open fixation of flail chest after blunt trauma. , 1990, The Annals of thoracic surgery.

[26]  D. Trunkey,et al.  The fractured rib in chest wall trauma. , 1997, Chest surgery clinics of North America.

[27]  R. Labitzke.  Zur Frage der biomechanischen Prüfung von Metallimplantaten für die Thoraxwandstabilisierung , 1981, Langenbecks Archiv für Chirurgie.

[28]  M. Aufmkolk,et al.  Operative chest wall stabilization in flail chest--outcomes of patients with or without pulmonary contusion. , 1998, Journal of the American College of Surgeons.

[29]  N Yoganandan,et al.  Biomechanics of human thoracic ribs. , 1998, Journal of biomechanical engineering.

[30]  S. Kljucar,et al.  [The unstable thoracic wall: possibilities for treatment]. , 1991, Helvetica chirurgica acta.

[31]  V. Vécsei,et al.  [Surgical stabilization of thoracic wall fractures]. , 1991, Der Unfallchirurg.

[32]  D B Chaffin,et al.  Development and evaluation of a scalable and deformable geometric model of the human torso. , 1996, Clinical biomechanics.

[33]  M. Eren,et al.  Open Fixation in Flail Chest: Review of 64 Patients , 2004, Asian cardiovascular & thoracic annals.

[34]  I. Stein,et al.  Rib structure and bending strength: An autopsy study , 1976, Calcified Tissue Research.

[35]  S B Roberts,et al.  Global geometric characteristics of typical human ribs. , 1972, Journal of biomechanics.

[36]  H. Frost,et al.  Age and sex related changes in the amount of cortex of normal human ribs. , 1966, Acta orthopaedica Scandinavica.

[37]  S B Roberts,et al.  Elastostatic analysis of the human thoracic skeleton. , 1970, Journal of biomechanics.

[38]  J. Testart,et al.  Treatment of flail chest with Judet's struts. , 1983, The Journal of thoracic and cardiovascular surgery.

[39]  M. Gugger,et al.  Pulmonary function testing after operative stabilisation of the chest wall for flail chest. , 2001, European journal of cardio-thoracic surgery : official journal of the European Association for Cardio-thoracic Surgery.

[40]  E. Brug,et al.  [Stabilization of the flail chest with tension band wires of ribs and sternum (author's transl)]. , 1979, Zentralblatt fur Chirurgie.

[41]  R. Landreneau,et al.  Strut fixation of an extensive flail chest. , 1991, The Annals of thoracic surgery.

[42]  T Belytschko,et al.  A model for studies of mechanical interactions between the human spine and rib cage. , 1974, Journal of biomechanics.

[43]  W. Ruschewski,et al.  Stabilization of Flail Chest by Compression Osteosynthesis - Experimental and Clinical Results , 1981, The Thoracic and cardiovascular surgeon.

[44]  J. Landercasper,et al.  Long-term disability after flail chest injury. , 1983, The Journal of trauma.