Influence of surface property of CaCO3 fillers on apparent viscosity of filled polydimethylsiloxane

[1]  A. Ahmad,et al.  Enhancing membrane hydrophobicity using silica end-capped with organosilicon for CO2 absorption in membrane contactor , 2020 .

[2]  Limin Han,et al.  Study on preparation and crystalline transformation of nano- and micro-CaCO3 by supercritical carbon dioxide , 2020 .

[3]  Amol V. Pansare,et al.  Hydrophobic interpenetrating polyamide-PDMS membranes for desalination, pesticides removal and enhanced chlorine tolerance. , 2020, Chemosphere.

[4]  H. Sixta,et al.  Adhesion properties of regenerated lignocellulosic fibres towards poly(lactic acid) microspheres assessed by colloidal probe technique. , 2018, Journal of colloid and interface science.

[5]  Junfu Wei,et al.  Enhanced adsorption of phthalic acid esters (PAEs) from aqueous solution by alkylbenzene-functionalized polypropylene nonwoven and its adsorption mechanism insight , 2018 .

[6]  Haitao Wang,et al.  Evaluation of the catalytic surface of Ni impregnated meso-microporous silica KIT-6 in CH4 dry reforming by inverse gas chromatography , 2017 .

[7]  Tao Wang,et al.  Measurement of solubility thermodynamic and diffusion kinetic characteristic of solvents in PDMS by inverse gas chromatography , 2015 .

[8]  Haitao Wang,et al.  Inverse gas chromatography applied in the surface properties evaluation of mesocellular silica foams modified by sized nickel nanoparticles. , 2013, Journal of chromatography. A.

[9]  J. Buiting,et al.  Surface energy characterization of carbonate rocks , 2013 .

[10]  Z. Cai,et al.  Influence of drying method on the surface energy of cellulose nanofibrils determined by inverse gas chromatography. , 2013, Journal of colloid and interface science.

[11]  Haitao Wang,et al.  Influence of KIT-6's pore structure on its surface properties evaluated by inverse gas chromatography , 2012 .

[12]  A new procedure for calculating Hansen solubility parameters of carbon nanotube/polymer composites , 2012, Polymer Bulletin.

[13]  R. Gupta,et al.  The rheology of aramid platelet suspensions , 2011 .

[14]  B. Strzemięcka,et al.  Inverse gas chromatography as a source of physiochemical data. , 2009, Journal of chromatography. A.

[15]  Heyong He,et al.  Study of H-β-zeolite supported Rh catalyst by inverse gas chromatography , 2008 .

[16]  A. Siegmann,et al.  Highly filled natural CaCO3 composites, III. Filler surface treatment and its structure , 2008 .

[17]  A. Voelkel,et al.  Inverse gas chromatography as a tool for investigation of nanomaterials. , 2007, Journal of colloid and interface science.

[18]  M. Nardin,et al.  A study of the surface properties of cotton fibers by inverse gas chromatography. , 2007, Journal of colloid and interface science.

[19]  Ethan N. Chiang,et al.  Determination of the surface energetics of surface modified calcium carbonate using inverse gas chromatography , 2006 .

[20]  M. Antonietti,et al.  Uniform Hexagonal Plates of Vaterite CaCO3 Mesocrystals Formed by Biomimetic Mineralization , 2006 .

[21]  P. Supaphol,et al.  Surface-modified calcium carbonate particles by admicellar polymerization to be used as filler for isotactic polypropylene , 2006 .

[22]  S. Ordóñez,et al.  Benzylation of benzene over Fe-modified ZSM-5 zeolites: Correlation between activity and adsorption properties , 2005 .

[23]  Y. Wang,et al.  Interfacial interactions in calcium carbonate–polypropylene composites. 2: Effect of compounding on the dispersion and the impact properties of surface‐modified composites , 2004 .

[24]  S. Ordóñez,et al.  Adsorption properties of a Pd/γ-Al2O3 catalyst using inverse gas chromatography , 2004 .

[25]  D. M. Ansari,et al.  Surface modification of calcium carbonates studied by inverse gas chromatography and the effect on mechanical properties of filled polypropylene , 2004 .

[26]  N. A. Katsanos,et al.  Surface energy of solid catalysts measured by inverse gas chromatography. , 2004, Journal of colloid and interface science.

[27]  E. Fekete,et al.  Determination of the surface characteristics of particulate fillers by inverse gas chromatography at infinite dilution: a critical approach. , 2004, Journal of colloid and interface science.

[28]  D. M. Ansari,et al.  Correlation of the material properties of calcium carbonate filled polypropylene with the filler surface energies , 2003 .

[29]  M. Osman,et al.  Surface Treatment of Calcite with Fatty Acids: Structure and Properties of the Organic Monolayer , 2002 .

[30]  G. Vancso,et al.  Surface energy characteristics of toner particles by automated inverse gas chromatography. , 2002, Journal of chromatography. A.

[31]  Qinglin Zhang,et al.  An IGC Study of Pd/SDB Catalysts for Partial Oxidation of Propylene to Acrylic Acid , 2000 .

[32]  P. Luner,et al.  Surface energetics of calcium carbonates using inverse gas chromatography , 2000 .

[33]  S. Milonjić.  Surface properties of metal ions modified silicas , 1999 .

[34]  Z. Y. Al-Saigh.  Review: Inverse Gas Chromatography for the Characterization of Polymer Blends , 1997 .

[35]  H. Schreiber,et al.  Application of Inverse Gas Chromatography to Molecular Diffusion in Polymers , 1994 .

[36]  H. Schreiber,et al.  Inverse gas chromatography for polymer surface characterization above and below Tg , 1993 .

[37]  H. Balard,et al.  Characterization and modification of fillers for paints and coatings , 1993 .

[38]  J. Schultz,et al.  Characterization, by inverse gas chromatography, of the surface properties of calcium carbonate before and after treatment with stearic acid , 1988 .

[39]  C. Turchi,et al.  Surface properties of a calcium carbonate filler treated with stearic acid , 1984 .

[40]  M. B. Roller.  Characterization of the time-temperature-viscosity behavior of curing B-staged epoxy resin , 1975 .