Studies in fiber guided excimer laser surgery for cutting and drilling bone and meniscus

Our experiments on transmitting high‐power excimer laser pulses through optical fibers and our investigations on excimer laser ablation of hard tissue show the feasibility of using the excimer laser as an additional instrument in general and accident surgery involving minimal invasive surgery. By combining XeCl‐excimer lasers and tapered fused silica fibers we obtained output fluences up to 32 J/cm2 and ablation rates of 3 μm/pulse of hard tissue. This enables us to cut bone and cartilage in a period of time which is suitable for clinical operations. Various experiments were carried out on cadavers in order to optimize the parameters of the excimer laser and fibers: e.g., wavelength, pulse duration, energy, repetition rate, fiber core diameter. The surfaces of the cut tissue are comparable to cuts with conventional instruments. No carbonisation was observed. The temperature increase is below 40°C in the tissue surrounding the laser spot. The healing rate of an excimer laser cut is not slower than mechanical treatments; the quality is comparable.

[1]  Kurt E. Leopold,et al.  Dependence of the nonlinear transmission properties of fused silica fibers on excimer laser wavelength , 1989 .

[2]  R. Krueger,et al.  A comparative study of corneal incisions induced by diamond and steel knives and two ultraviolet radiations from an excimer laser. , 1986, The British journal of ophthalmology.

[3]  Walter Neu,et al.  Ultrafast imaging of vascular tissue ablation by an XeCl excimer laser , 1991, Photonics West - Lasers and Applications in Science and Engineering.

[4]  R. Srinivasan,et al.  Subnanosecond probing of the ablation of soft plaque from arterial wall by 308 nm pulses delivered through a fiber , 1990 .

[5]  M W Berns,et al.  Ablation of bone and polymethylmethacrylate by an XeCl (308 nm) excimer laser , 1989, Lasers in surgery and medicine.

[6]  Tsunenori Arai,et al.  Ablation characteristics of menisci by various laser irradiation (193 nm-10.6 μm), pulsed and continuous wave , 1990, Photonics West - Lasers and Applications in Science and Engineering.

[7]  J. Isner,et al.  Excimer laser atherectomy. The greening of Sisyphus. , 1990, Circulation.

[8]  J Wollensak,et al.  Excimer laser keratectomy for correction of astigmatism. , 1988, American journal of ophthalmology.

[9]  C. Puliafito,et al.  Plasma-mediated excimer laser ablation of bone: a potential microsurgical tool. , 1989, American journal of otolaryngology.

[10]  Alfred Fuchsberger.  Untersuchung der spanenden Bearbeitung von Knochen , 1986 .

[11]  Karl-Friedrich Klein,et al.  Optical Fiber Transmission Of Excimer Laser Pulses , 1989, Other Conferences.

[12]  R. Srinivasan,et al.  Ablation of polymers and biological tissue by ultraviolet lasers. , 1986, Science.

[13]  Walter Neu,et al.  Diagnosis of atherosclerotic tissue by resonance fluorescence spectroscopy , 1991, Photonics West - Lasers and Applications in Science and Engineering.

[14]  Martin Dressel,et al.  Elaboration of excimer lasers dosimetry for bone and meniscus cutting and drilling using optical fibers , 1991, Photonics West - Lasers and Applications in Science and Engineering.

[15]  M. Dressel,et al.  [Ablation of the trabecular meshwork]. , 1990, Klinische Monatsblatter fur Augenheilkunde.

[16]  J. Lustmann,et al.  193 nm excimer laser ablation of bone , 1991, Lasers in surgery and medicine.

[17]  M. Dressel,et al.  Die Ablation des Trabekelwerks , 1990 .

[18]  M. Berns,et al.  Ultraviolet 308-nm excimer laser ablation of bone: an acute and chronic study. , 1989, Applied optics.

[19]  L Seipel,et al.  Percutaneous coronary excimer laser angioplasty in patients with stable and unstable angina pectoris. Acute results and incidence of restenosis during 6-month follow-up. , 1990, Circulation.