Phosphorus-based Flame Retardancy Mechanisms—Old Hat or a Starting Point for Future Development?

Different kinds of additive and reactive flame retardants containing phosphorus are increasingly successful as halogen-free alternatives for various polymeric materials and applications. Phosphorus can act in the condensed phase by enhancing charring, yielding intumescence, or through inorganic glass formation; and in the gas phase through flame inhibition. Occurrence and efficiency depend, not only on the flame retardant itself, but also on its interaction with pyrolysing polymeric material and additives. Flame retardancy is sensitive to modification of the flame retardant, the use of synergists/adjuvants, and changes to the polymeric material. A detailed understanding facilitates the launch of tailored and targeted development.

[1]  D. Price.  1 – Introduction: polymer combustion, condensed phase pyrolysis and smoke formation , 2001 .

[2]  Michel Le Bras,et al.  Press Release: Fire Retardancy of Polymers: The use of Intumescence , 1998, Engineering Plastics.

[3]  Bernhard Schartel,et al.  Flame Retardancy Mechanisms of Aluminium Phosphinate in Combination with Melamine Cyanurate in Glass-Fibre-Reinforced Poly(1,4-butylene terephthalate) , 2008 .

[4]  G. Camino,et al.  Structural studies on chars from fire retardant intumescent systems , 1989 .

[5]  B. Schartel,et al.  Phosphonium‐modified layered silicate epoxy resins nanocomposites and their combinations with ATH and organo‐phosphorus fire retardants , 2006 .

[6]  Sergei V. Levchik,et al.  New developments in fire retardant non‐halogen aromatic phosphates , 2000 .

[7]  C. Westbrook,et al.  Flame Inhibition by Phosphorus-Containing Compounds over a Range of Equivalence Ratios , 2005 .

[8]  R. Delobel,et al.  Effect of intumescence on polymer degradation , 1994 .

[9]  S. Levchik,et al.  New halogen‐free fire retardant for engineering plastic applications , 2001 .

[10]  C. A. Wilkie,et al.  Fire and polymers : materials and solutions for hazard prevention , 2001 .

[11]  B. Schartel,et al.  Pyrolysis combustion flow calorimeter: A tool to assess flame retarded PC/ABS materials? , 2007 .

[12]  Joseph G. Smith,et al.  Flame retardant aircraft epoxy resins containing phosphorus , 2005 .

[13]  V. Babushok,et al.  Inhibitor rankings for alkane combustion , 2000 .

[14]  John Davis,et al.  The technology of halogen-free flame retardant phosphorus additives for polymeric systems , 1996 .

[15]  J. W. Hastie,et al.  Molecular Basis of Flame Inhibition. , 1973, Journal of research of the National Bureau of Standards. Section A, Physics and chemistry.

[16]  G. Camino,et al.  Intumescent fire-retardant systems , 1989 .

[17]  G. Simon,et al.  Phosphorus-containing diamine for flame retardancy of high functionality epoxy resins. Part II. The thermal and mechanical properties of mixed amine systems , 2006 .

[18]  B. Schartel,et al.  Flame retardancy mechanisms of triphenyl phosphate, resorcinol bis(diphenyl phosphate) and bisphenol A bis(diphenyl phosphate) in polycarbonate/acrylonitrile–butadiene–styrene blends , 2007 .

[19]  G. Botelho,et al.  Studies on thermal and thermo-oxidative degradation of poly(ethylene terephthalate) and poly(butylene terephthalate) , 2001 .

[20]  M. Lewin,et al.  PHYSICAL AND CHEMICAL MECHANISMS OF FLAME RETARDING OF POLYMERS , 1998 .

[21]  G. Camino,et al.  Fire retardant mechanism in intumescent ethylene vinyl acetate compositions , 2003 .

[22]  A. Ballistreri,et al.  Mechanism of flame retardant action of red phosphorus in polyacrylonitrile , 1983 .

[23]  M. Döring,et al.  Synthesis and properties of flame‐retardant epoxy resins based on DOPO and one of its analog DPPO , 2007 .

[24]  G. Camino,et al.  FIRE RETARDANT ACTION OF RED PHOSPHORUS IN NYLON 6 , 1998 .

[25]  M. Zulfiqar,et al.  A detailed investigation of the products of the thermal degradation of polystyrene , 1990 .

[26]  C. A. Wilkie,et al.  Zinc Borates as Synergists for Flame Retarded Polymers , 2005 .

[27]  G. Camino,et al.  Study of the mechanism of intumescence in fire retardant polymers: Part I—Thermal degradation of ammonium polyphosphate-pentaerythritol mixtures , 1984 .

[28]  Bernhard Schartel,et al.  Layered silicate polymer nanocomposites: new approach or illusion for fire retardancy? Investigations of the potentials and the tasks using a model system , 2004 .

[29]  P. Hornsby.  Fire retardant fillers for polymers , 2001 .

[30]  B. Schartel,et al.  Solid-state NMR investigations of the pyrolysis and thermo-oxidative decomposition products of a polystyrene/red phosphorus/magnesium hydroxide system , 2007 .

[31]  Bernhard Schartel,et al.  Flame Retardant Mechanisms of Red Phosphorus and Magnesium Hydroxide in High Impact Polystyrene , 2004 .

[32]  H. Vandersall,et al.  Intumescent coating system, their development and chemistry , 1971 .

[33]  S. Bourbigot,et al.  Intumescent fire protective coating: Toward a better understanding of their mechanism of action , 2006 .

[34]  M. Lewin,et al.  Thermal decomposition of aliphatic nylons , 1999 .

[35]  Bernhard Schartel,et al.  Fire risks of burning asphalt , 2010 .

[36]  Bernhard Schartel,et al.  Influence of external heat flux and coating thickness on the thermal insulation properties of two different intumescent coatings using cone calorimeter and numerical analysis , 2003 .

[37]  Q. Yao,et al.  New developments in flame retardancy of epoxy resins , 2005 .

[38]  S. Levchik,et al.  Combustion and fire retardancy of aliphatic nylons , 2000 .

[39]  J. Hastie.  Mass spectrometric studies of flame inhibition: Analysis of antimony trihalides in flames , 1973 .

[40]  Bernhard Schartel,et al.  Development of fire‐retarded materials—Interpretation of cone calorimeter data , 2007 .

[41]  M. Shau,et al.  Syntheses, structure, reactivity, and thermal properties of new cyclic phosphine oxide epoxy resins cured by diamines , 1996 .

[42]  Ying‐Ling Liu,et al.  Phosphorus-containing epoxy for flame retardant. III: Using phosphorylated diamines as curing agents , 1997 .

[43]  G. Camino,et al.  Epoxy resins cured with aminophenylmethylphosphine oxide—II. Mechanism of thermal decomposition , 1998 .

[44]  G. Camino,et al.  Effect of the fire-retardant, ammonium polyphosphate, on the thermal decomposition of aliphatic polyamides. I: Polyamides 11 and 12 , 1992 .

[45]  G. Camino,et al.  Study of the mechanism of intumescence in fire retardant polymers. Part V: Mechanism of formation of gaseous products in the thermal degradation of ammonium polyphosphate , 1985 .

[46]  M. Döring,et al.  A Novel DOPO‐Based Diamine as Hardener and Flame Retardant for Epoxy Resin Systems , 2008 .

[47]  S. Levchik,et al.  Flame Retardants in Commercial Use or Advanced Development in Polycarbonates and Polycarbonate Blends , 2009 .

[48]  S. Duquesne,et al.  Ammonium polyphosphate–aluminum trihydroxide antagonism in fire retarded butadiene–styrene block copolymer , 2005 .

[49]  Marcelo M. Hirschler,et al.  Oxygen index : correlations to other fire tests , 1992 .

[50]  S. Bourbigot,et al.  Recent Advances for Intumescent Polymers , 2004 .

[51]  I. Hamerton,et al.  RECENT DEVELOPMENTS IN THE CHEMISTRY OF HALOGEN-FREE FLAME RETARDANT POLYMERS , 2002 .

[52]  J. Brosse,et al.  Chemical modification of epoxy resins by dialkyl(or aryl) phosphates: Evaluation of fire behavior and thermal stability , 1996 .

[53]  R. K. Wharton.  Correlation Between the Critical Oxygen Index Test and Other Fire Tests , 1981 .

[54]  Bernhard Schartel,et al.  Some comments on the main fire retardancy mechanisms in polymer nanocomposites , 2006 .

[55]  A. I. Balabanovich,et al.  Influence of the oxidation state of phosphorus on the decomposition and fire behaviour of flame-retarded epoxy resin composites , 2006 .

[56]  B. Schartel,et al.  Temperature inside burning polymer specimens: Pyrolysis zone and shielding , 2009 .

[57]  Joseph. Green.  Mechanisms for Flame Retardancy and Smoke suppression -A Review , 1996 .

[58]  A. Granzow,et al.  The effect of red phosphorus on the flammability of poly(ethylene terephthalate) , 1976 .

[59]  S. K. Brauman.  Polymer degradation and combustion , 1977 .

[60]  S. Levchik,et al.  Phosphorus oxynitride: a thermally stable fire retardant additive for polyamide 6 and poly(butylene terephthalate) , 1999 .

[61]  G. Jones,et al.  Phosphorus in the burnt gas from fuel-rich hydrogenoxygen flames , 1964 .

[62]  Chun-Shan Wang,et al.  Synthesis and properties of epoxy resins containing bis(3-hydroxyphenyl) phenyl phosphate , 2000 .

[63]  S. Bourbigot,et al.  Recent advances in the use of zinc borates in flame retardancy of EVA , 1999 .

[64]  Jung-Fong Lin,et al.  Thermal characterization of the phosphorus-containing sulfone-modified epoxy resins by thermogravimetric analysis and direct pyrolysis-GC/MS measurement on the thermally degradative volatiles , 2000 .

[65]  A. I. Balabanovich,et al.  Pyrolysis of epoxy resins and fire behavior of epoxy resin composites flame‐retarded with 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide additives , 2007 .

[66]  B. Schartel,et al.  Flame retardancy mechanisms of bisphenol A bis(diphenyl phosphate) in combination with zinc borate in bisphenol A polycarbonate/acrylonitrile–butadiene–styrene blends , 2010 .

[67]  Bernhard Schartel,et al.  Red Phosphorus-Controlled Decomposition for Fire Retardant PA 66 , 2002 .

[68]  B. Schartel,et al.  Fire retardancy mechanisms of arylphosphates in polycarbonate (PC) and PC/acrylonitrile-butadiene-styrene , 2009 .

[69]  Heinz Sturm,et al.  Flame retardancy mechanisms of metal phosphinates and metal phosphinates in combination with melamine cyanurate in glass‐fiber reinforced poly(1,4‐butylene terephthalate): the influence of metal cation , 2008 .

[70]  E. Pearce,et al.  Fire Smart Polymers , 2001 .

[71]  C. F. Cullis,et al.  The effect of red phosphorus on the flammability and smoke-producing tendency of poly(vinyl chloride) and polystyrene , 1986 .

[72]  A. I. Balabanovich,et al.  Fire retardant and charring effect of poly(sulfonyldiphenylene phenylphosphonate) in poly(butylene terephthalate) , 2003 .

[73]  S. Levchik,et al.  Overview of recent developments in the flame retardancy of polycarbonates , 2005 .

[74]  M. Bras.  Fire retardancy of polymers : new applications of mineral fillers , 2007 .

[75]  M. Lewin,et al.  2 – Mechanisms and modes of action in flame retardancy of polymers , 2001 .

[76]  G. Camino,et al.  Study of the mechanism of intumescence in fire retardant polymers. Part II: Mechanism of action in polypropylene - ammonium polyphosphate - pentaerythritol mixtures , 1984 .

[77]  S. Levchik,et al.  Thermal decomposition, combustion and flame‐retardancy of epoxy resins—a review of the recent literature , 2004 .

[78]  B. Schartel,et al.  TG-MS and TG-FTIR applied for an unambiguous thermal analysis of intumescent coatings , 2002 .

[79]  P. Hornsby,et al.  Thermal decomposition behaviour of polyamide fire-retardant compositions containing magnesium hydroxide filler , 1996 .

[80]  L. Napolitano.  Materials , 1984, Science.

[81]  Bernhard Schartel,et al.  Halogen-free flame retarded poly(butylene terephthalate) (PBT) using metal oxides/PBT nanocomposites in combination with aluminium phosphinate , 2009 .

[82]  B. Schartel,et al.  Layered silicate epoxy nanocomposites: formation of the inorganic‐carbonaceous fire protection layer , 2011 .

[83]  B. Schartel,et al.  Flame retardancy mechanisms of aluminium phosphinate in combination with melamine polyphosphate and zinc borate in glass-fibre reinforced polyamide 6,6 , 2007 .

[84]  S. Levchik,et al.  A review on thermal decomposition and combustion of thermoplastic polyesters , 2004 .

[85]  Giovanni Camino,et al.  Mechanism of Action of Phosphorus-Based Flame Retardants in Nylon 6. II. Ammonium Polyphosphate/Talc , 1995 .

[86]  K. Shen,et al.  Zinc borates as multifunctional polymer additives , 2008 .

[87]  B. Martel,et al.  Charring processes in thermoplastic polymers: Effect of condensed phase oxidation on the formation of chars in pure polymers , 1988 .

[88]  Xi-chang Shi,et al.  Flame retardancy behavior of zinc borate , 1999 .

[89]  Sergei V. Levchik,et al.  Introduction to Flame Retardancy and Polymer Flammability , 2006 .

[90]  P. Bajaj,et al.  Fire-retardant materials , 1992 .

[91]  Charles A. Harper,et al.  Handbook of Building Materials for Fire Protection , 2003 .

[92]  C. A. Wilkie,et al.  Inhibition by red phosphorus of unimolecular thermal chain-scission in poly(methyl methacrylate): investigation by NMR, FT-IR and laser desorption/Fourier transform mass spectroscopy , 1986 .

[93]  A. I. Balabanovich,et al.  Pyrolysis and fire behaviour of epoxy systems containing a novel 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide-(DOPO)-based diamino hardener , 2008 .

[94]  Ying‐Ling Liu,et al.  Synthesis, characterization, thermal, and flame retardant properties of phosphate-based epoxy resins , 1997 .

[95]  S. Bourbigot,et al.  Synergistic aspects of the combination of magnesium hydroxide and ammonium polyphosphate in flame retardancy of ethylene-vinyl acetate copolymer , 2006 .

[96]  S. Levchik,et al.  Flame Retardants in Commercial Use or in Advanced Development in Polycarbonates and Polycarbonate Blends , 2006 .

[97]  G. F. Levchik,et al.  Mechanism of Action of Phosphorus‐based Flame Retardants in Nylon 6. III. Ammonium Polyphosphate/Manganese Dioxide , 1996 .

[98]  P. Hornsby.  The application of magnesium hydroxide as a fire retardant and smoke-suppressing additive for polymers , 1994 .

[99]  E. Peters.  Flame-retardant thermoplastics. I. Polyethylene–red phosphorus† , 1979 .

[100]  Bernhard Schartel,et al.  Assessing the performance of intumescent coatings using bench‐scaled cone calorimeter and finite difference simulations , 2007 .

[101]  S. Bourbigot,et al.  Effect of zinc borate on the thermal degradation of ammonium polyphosphate , 2007 .

[102]  M. Lewin.  Synergistic and Catalytic Effects in Flame Retardancy of Polymeric Materials— An Overview , 1999 .

[103]  B. Schartel,et al.  Flame retarded epoxy resins by adding layered silicate in combination with the conventional protection-layer-building flame retardants melamine borate and ammonium polyphosphate , 2010 .

[104]  Giovanni Camino,et al.  Effect of glass fibres and fire retardant on the combustion behaviour of composites, glass fibres–poly(butylene terephthalate) , 1998 .

[105]  B. Rånby,et al.  Plastics and Rubber , 1996 .

[106]  G. Camino,et al.  Study of the mechanism of intumescence in fire retardant polymers: Part III—Effect of urea on the ammonium polyphosphate-pentaerythritol system , 1984 .

[107]  Menachem Lewin,et al.  Low Add-on Levels of Chemicals on Cotton and Flame Retardancy , 1973 .

[108]  J. J. Shea,et al.  Fire retardancy of polymeric materials , 2001 .

[109]  Charles A. Wilkie,et al.  Fire retardancy of polymeric materials , 2000 .

[110]  S. Bourbigot,et al.  Flame Retardant Plastics , 2004 .

[111]  M. Shau,et al.  Synthesis, structure, and thermal properties of epoxy‐imide resin cured by phosphorylated diamine , 1995 .

[112]  B. Schartel,et al.  Mechanical, thermal, and fire behavior of bisphenol a polycarbonate/multiwall carbon nanotube nanocomposites , 2008 .

[113]  Bernhard Schartel,et al.  Effect of Red Phosphorus and Melamine Polyphosphate on the Fire Behavior of HIPS , 2005 .

[114]  T. Arii,et al.  The effect of humidity on thermal decomposition of terephthalate polyester , 2004 .

[115]  J. Yeh,et al.  Combustion and smoke emission properties of poly(ethylene terephthalate) filled with phosphorous and metallic oxides , 1998 .