Characterization of Autoignition in a Knocking SI Engine Using Heat Release Analysis
暂无分享,去创建一个
[1] Andy Yates,et al. An Investigation of the Ignition Delay Character of Different Fuel Components and an Assessment of Various Autoignition Modelling Approaches , 2005 .
[2] Nigel N. Clark,et al. A Parametric Study of Knock Control Strategies for a Bi-Fuel Engine , 1998 .
[3] D. Bradley,et al. Fuel Blend and Mixture Strength Effects on Autoignition Heat Release Rates and Knock Intensity in S.I. Engines , 1996 .
[4] Alex C. Alkidas,et al. Cylinder-pressure-based methods for sensing spark-ignition engine knock , 2007 .
[5] D. Bradley,et al. Heat release rates due to autoignition, and their relationship to knock intensity in spark ignition engines , 1996 .
[6] M. Nakano,et al. Predictions of the Knock Onset and the Effects of Heat Release Pattern and Unburned Gas Temperature on Torque at Knock Limit in S.I. Engines , 1995 .
[7] J. Eng,et al. Characterization of Pressure Waves in HCCI Combustion , 2002 .
[8] Charles E. Newman,et al. The intensity of knock in an internal combustion engine: An experimental and modeling study. Revision 1 , 1992 .
[9] A. Douaud,et al. Four-Octane-Number Method for Predicting the Anti-Knock Behavior of Fuels and Engines , 1978 .
[10] John B. Heywood,et al. Characterization of Knock in a Spark-Ignition Engine , 1989 .
[11] Jun Takemura,et al. A Knock Anticipating Strategy Basing on the Real-Time Combustion Mode Analysis , 1989 .
[12] G. Woschni. A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine , 1967 .
[13] W. Malalasekera,et al. Predicting the Onset of End-Gas Autoignition with a Quasi-Dimensional Spark Ignition Engine Model , 1997 .
[14] G. Konig,et al. End gas autoignition and knock in a spark ignition engine , 1990 .
[15] K.C. Cheok,et al. Wavelet-based knock detection with fuzzy logic , 2005, CIMSA. 2005 IEEE International Conference on Computational Intelligence for Measurement Systems and Applications, 2005..
[16] T. Iijima,et al. An Analytical Study on Knocking Heat Release and its Control in a Spark Ignition Engine , 1988 .
[17] Michalis Syrimis,et al. Knocking Cylinder Pressure Data Characteristics in a Spark-Ignition Engine , 2003 .
[18] J. C. Livengood,et al. Correlation of autoignition phenomena in internal combustion engines and rapid compression machines , 1955 .
[19] Andy Yates,et al. Correlating Auto-Ignition Delays And Knock-Limited Spark-Advance Data For Different Types Of Fuel , 2005 .
[20] Andy Yates,et al. Standard Knock Intensity Revisited: Atypical Burn Rate Characteristics identified in the CFR Octane Rating Engine , 2004 .
[21] John B. Heywood,et al. Heat Release Analysis of Engine Pressure Data , 1984 .
[22] John B. Heywood,et al. Internal combustion engine fundamentals , 1988 .
[23] James C. Keck,et al. Autoignition of adiabatically compressed combustible gas mixtures , 1987 .