CFD simulation of local and global mixing time in an agitated tank

The Issue of mixing efficiency in agitated tanks has drawn serious concern in many industrial processes. The turbulence model is very critical to predicting mixing process in agitated tanks. On the basis of computational fluid dynamics(CFD) software package Fluent 6.2, the mixing characteristics in a tank agitated by dual six-blade-Rushton-turbines(6-DT) are predicted using the detached eddy simulation(DES) method. A sliding mesh(SM) approach is adopted to solve the rotation of the impeller. The simulated flow patterns and liquid velocities in the agitated tank are verified by experimental data in the literature. The simulation results indicate that the DES method can obtain more flow details than Reynolds-averaged Navier-Stokes(RANS) model. Local and global mixing time in the agitated tank is predicted by solving a tracer concentration scalar transport equation. The simulated results show that feeding points have great influence on mixing process and mixing time. Mixing efficiency is the highest for the feeding point at location of midway of the two impellers. Two methods are used to determine global mixing time and get close result. Dimensionless global mixing time remains unchanged with increasing of impeller speed. Parallel, merging and diverging flow pattern form in the agitated tank, respectively, by changing the impeller spacing and clearance of lower impeller from the bottom of the tank. The global mixing time is the shortest for the merging flow, followed by diverging flow, and the longest for parallel flow. The research presents helpful references for design, optimization and scale-up of agitated tanks with multi-impeller.

[2]  R. Biggs,et al.  Mixing rates in stirred tanks , 1963 .

[3]  K. C. Lee,et al.  A Liquid Crystal Thermographic Technique for the Measurement of Mixing Characteristics in Stirred Vessels , 1997 .

[4]  Hu Zhang,et al.  CFD simulation of mixing characteristics in stirred tank by Smith turbine , 2010 .

[5]  Zhengming Gao,et al.  Large Eddy Simulations of Mixing Time in a Stirred Tank , 2006 .

[6]  R. Zadghaffari,et al.  A mixing study in a double-Rushton stirred tank , 2009, Comput. Chem. Eng..

[7]  P. Spalart.  A One-Equation Turbulence Model for Aerodynamic Flows , 1992 .

[8]  Philippe A. Tanguy,et al.  Mixing Time Analysis Using Colorimetric Methods and Image Processing , 2007 .

[9]  Hui Sun,et al.  Analysis of the pump-turbine S characteristics using the detached eddy simulation method , 2015 .

[10]  K. C. Lee,et al.  An experimental study of double-to-single-loop transition in stirred vessels , 1999 .

[11]  Anil Kumar,et al.  Mixing in a tank stirred by a Rushton turbine at a low clearance , 2008 .

[12]  Jyeshtharaj B. Joshi,et al.  EFFECT OF IMPELLER DESIGN ON LIQUID PHASE MIXING IN MECHANICALLY AGITATED REACTORS , 1991 .

[13]  A. Nienow,et al.  CFD Study of Homogenization with Dual Rushton Turbines—Comparison with Experimental Results: Part I: Initial Studies☆ , 2000 .

[14]  Philippe R. Spalart,et al.  Detached-eddy simulation of an airfoil at high angle of attack , 1999 .

[15]  Alberto Brucato,et al.  Prediction of flow fields in a dual-impeller stirred vessel , 1999 .

[16]  Vivek V. Ranade,et al.  CFD simulation of liquid-phase mixing in solid–liquid stirred reactor , 2008 .

[17]  G. Papadakis,et al.  Determination of mixing time and degree of homogeneity in stirred vessels with large eddy simulation , 2005 .

[18]  Jos Derksen,et al.  Mixing times in a turbulent stirred tank by means of LES , 2006 .

[19]  Jyeshtharaj B. Joshi,et al.  LIQUID PHASE MIXING IN MECHANICALLY AGITATED VESSELS , 1988 .

[20]  L. Fuchs,et al.  Large eddy simulations of the turbulent flow in a stirred reactor , 1998 .

[21]  Jian Liu,et al.  CFD investigation of the influence of volute geometrical variations on hydrodynamic characteristics of circulator pump , 2016 .

[22]  J. Smith,et al.  Liquid-phase mixing times in sparged and boiling agitated reactors with high gas loading , 2001 .

[23]  Shenjie Zhou,et al.  Turbulent flow and mixing performance of a novel six-blade grid disc impeller , 2015, Korean Journal of Chemical Engineering.

[24]  Alvin W. Nienow,et al.  CFD Study of Homogenization with Dual Rushton Turbines—Comparison with Experimental Results: Part II: The Multiple Reference Frame☆ , 2000 .

[25]  Michael Yianneskis,et al.  Hydrodynamic characteristics of dual Rushton impeller stirred vessels , 1996 .

[26]  Vivek V. Ranade.  'CFD simulation of liquid-phase mixing in solid-liquid stirred reactor' by G.R. Kasat, A.R. Khopkar, V.V. Ranade and A.B. Pandit. Response to the letter by Professor Fort [Chemical Engineering Science 63 (15) (2008) 3877-3885)] , 2009 .

[27]  Zoltan K. Nagy,et al.  Detached eddy simulation on the turbulent flow in a stirred tank , 2012 .