A binder-free composite anode composed of CuO nanosheets and multi-wall carbon nanotubes for high-performance lithium-ion batteries

Abstract The energy density and operational life of lithium-ion batteries (LIBs) depend sensitively on the properties of electrode materials. Transition metal oxide based electrodes attract much attention because of their potential to offer high energy density. In this study, we report a binder-free composite anode composed of CuO nanosheets and multi-wall carbon nanotubes for LIBs. This composite anode is fabricated by a cost-effective electrophoretic deposition process followed by facile solution immersion. When tested in a LIB, this composite anode delivers a high reversible capacity of 540 mAh g −1 and maintains its capacity retention of above 78% after 50 cycles at a current density of 100 mA g −1 , which is much higher than the CuO anode without carbon nanotubes. The high capacity, enhanced rate capability, low resistance, and increased operational life are attributed to the unique architecture of the hybrid electrode. The carbon nanotubes facilitate the electron transfer, enhance the structural stability of CuO nanosheets, and improve the adhesion of the CuO nanosheets to current collector. Such highly porous cross-linked network based on CuO nanosheets and multi-wall carbon nanotubes has great potential as a binder-free anode for high-performance LIBs.

[1]  Jaephil Cho,et al.  Roles of surface chemistry on safety and electrochemistry in lithium ion batteries. , 2013, Accounts of chemical research.

[2]  Lixia Yuan,et al.  Facile fabrication of CuO nanosheets on Cu substrate as anode materials for electrochemical energy storage , 2014 .

[3]  Xinsheng Peng,et al.  Thin copper oxide nanowires/carbon nanotubes interpenetrating networks for lithium ion batteries , 2012 .

[4]  L. Mai,et al.  Smart construction of three-dimensional hierarchical tubular transition metal oxide core/shell heterostructures with high-capacity and long-cycle-life lithium storage , 2015 .

[5]  B. Geng,et al.  High electrochemical performance based on ultrathin porous CuO nanobelts grown on Cu substrate as integrated electrode. , 2013, Physical chemistry chemical physics : PCCP.

[6]  Jaecheol Choi,et al.  Binder-free metal fibril-supported Fe2O3 anodes for high-performance lithium-ion batteries , 2014 .

[7]  Laxmidhar Besra,et al.  A review on fundamentals and applications of electrophoretic deposition (EPD) , 2007 .

[8]  B. Chowdari,et al.  Metal oxides and oxysalts as anode materials for Li ion batteries. , 2013, Chemical reviews.

[9]  S. Chou,et al.  Sn/SnO2@C composite nanofibers as advanced anode for lithium-ion batteries , 2015 .

[10]  H. Lezec,et al.  Electrical conductivity of individual carbon nanotubes , 1996, Nature.

[11]  Zhiyu Wang,et al.  Carbonate-assisted hydrothermal synthesis of porous, hierarchical CuO microspheres and CuO/GO for high-performance lithium-ion battery anodes , 2015 .

[12]  J. Tarascon,et al.  A Transmission Electron Microscopy Study of the Reactivity Mechanism of Tailor-Made CuO Particles toward Lithium , 2001 .

[13]  W. Choi,et al.  Vertically oriented MoS2 nanoflakes coated on 3D carbon nanotubes for next generation Li-ion batteries , 2016, Nanotechnology.

[14]  A. Manthiram,et al.  Facile synthesis of carbon-decorated single-crystalline Fe3O4 nanowires and their application as high performance anode in lithium ion batteries. , 2009, Chemical communications.

[15]  Lei Wang,et al.  Preparation of Co3O4/Carbon Derived from Ionic Liquid and its Application in Lithium-ion Batteries , 2017 .

[16]  X. Xia,et al.  Construction of carbon nanoflakes shell on CuO nanowires core as enhanced core/shell arrays anode of lithium ion batteries , 2015 .

[17]  Wan-Jin Lee,et al.  Hierarchically mesoporous CuO/carbon nanofiber coaxial shell-core nanowires for lithium ion batteries , 2015, Scientific Reports.

[18]  Yulong Ying,et al.  Flexible CuO nanosheets/reduced-graphene oxide composite paper: binder-free anode for high-performance lithium-ion batteries. , 2013, ACS applied materials & interfaces.

[19]  Yimei Zhu,et al.  Copper oxide nanocrystals. , 2005, Journal of the American Chemical Society.

[20]  M. Armand,et al.  Building better batteries , 2008, Nature.

[21]  Jiawei Wang,et al.  Free-standing CuO nanoflake arrays coated Cu foam for advanced lithium ion battery anodes , 2016 .

[22]  Yingbo He,et al.  Synthesis of CuO nano- and micro-structures and their Raman spectroscopic studies , 2010 .

[23]  Huaiyong Zhu,et al.  Preparation and Electrochemical Performance of Polycrystalline and Single Crystalline CuO Nanorods as Anode Materials for Li Ion Battery , 2004 .

[24]  M. Dresselhaus,et al.  Defect characterization in graphene and carbon nanotubes using Raman spectroscopy , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[25]  Jun Liu,et al.  Synthesis of CuO nanowire arrays as high-performance electrode for lithium ion batteries , 2015 .

[26]  Tian-Tian Chen,et al.  Facile fabrication of MOF-derived octahedral CuO wrapped 3D graphene network as binder-free anode for high performance lithium-ion batteries , 2017 .

[27]  Xinsheng Peng,et al.  Self-assembly of mesoporous CuO nanosheets-CNT 3D-network composites for lithium-ion batteries. , 2013, Nanoscale.

[28]  A. Boccaccini,et al.  Electrophoretic deposition: From traditional ceramics to nanotechnology , 2008 .

[29]  D. He,et al.  Facile synthesis of CuO nanorod for lithium storage application , 2013 .

[30]  Yong Tang,et al.  Hierarchical shell/core CuO nanowire/carbon fiber composites as binder-free anodes for lithium-ion batteries , 2017 .

[31]  Maher F El-Kady,et al.  Designing 3D highly ordered nanoporous CuO electrodes for high-performance asymmetric supercapacitors. , 2015, ACS applied materials & interfaces.

[32]  Yu‐Guo Guo,et al.  Introducing Dual Functional CNT Networks into CuO Nanomicrospheres toward Superior Electrode Materials for Lithium-Ion Batteries , 2008 .

[33]  T. Ebbesen,et al.  Exceptionally high Young's modulus observed for individual carbon nanotubes , 1996, Nature.

[34]  Daoben Zhu,et al.  Carbon Nanotubes Coated with Alumina as Gate Dielectrics of Field‐Effect Transistors , 2006 .

[35]  Tianyou Zhai,et al.  Revealing the conversion mechanism of CuO nanowires during lithiation-delithiation by in situ transmission electron microscopy. , 2012, Chemical communications.

[36]  Taihong Wang,et al.  Metal-Organic Frameworks Derived Nanocomposites of Mixed-Valent MnOx Nanoparticles In-Situ Grown on Ultrathin Carbon Sheets for High-Performance Supercapacitors and Lithium-Ion Batteries , 2017 .

[37]  Zaiping Guo,et al.  3D Hierarchical Porous α‐Fe2O3 Nanosheets for High‐Performance Lithium‐Ion Batteries , 2015 .

[38]  J. Tu,et al.  Incorporation of MWCNTs into leaf-like CuO nanoplates for superior reversible Li-ion storage , 2010 .

[39]  M. Dresselhaus,et al.  Raman spectroscopic characterization of submicron vapor-grown carbon fibers and carbon nanofibers obtained by pyrolyzing hydrocarbons , 1999 .

[40]  Shuo Zhang,et al.  CuO/C microspheres as anode materials for lithium ion batteries , 2011 .

[41]  Arava Leela Mohana Reddy,et al.  Coaxial MnO2/carbon nanotube array electrodes for high-performance lithium batteries. , 2009, Nano letters.

[42]  W. Wenbo,et al.  Copper oxide nanowire arrays synthesized by in-situ thermal oxidation as an anode material for lithium-ion batteries , 2014 .

[43]  Qiang Zhang,et al.  Preparation of CuO/C core-shell nanowires and its application in lithium ion batteries , 2012 .

[44]  A. R. Boccaccini,et al.  Electrophoretic deposition of carbon nanotube–ceramic nanocomposites , 2010 .

[45]  Xin Wang,et al.  Cobalt oxide-carbon nanosheet nanoarchitecture as an anode for high-performance lithium-ion battery. , 2015, ACS applied materials & interfaces.

[46]  John B Goodenough,et al.  Evolution of strategies for modern rechargeable batteries. , 2013, Accounts of chemical research.

[47]  Cher Ming Tan,et al.  Preparation and characterization of copper oxide thin films deposited by filtered cathodic vacuum arc , 2004 .

[48]  Jun Yang,et al.  Multiple transition metal oxide mesoporous nanospheres with controllable composition for lithium storage , 2014 .

[49]  Guozhen Shen,et al.  High-performance energy-storage devices based on WO3 nanowire arrays/carbon cloth integrated electrodes , 2013 .

[50]  D. Jung,et al.  Morphological and physical investigation of carbon nanotube and graphene buffers used in high capacity lithium ion battery anodes , 2013 .

[51]  X. Xia,et al.  Controllable Synthesis of Copper Oxide/Carbon Core/Shell Nanowire Arrays and Their Application for Electrochemical Energy Storage , 2015, Nanomaterials.

[52]  A. Zettl,et al.  A facile and patternable method for the surface modification of carbon nanotube forests using perfluoroarylazides. , 2008, Journal of the American Chemical Society.

[53]  Joachim Maier,et al.  Lithium Storage in Carbon Nanostructures , 2009, Advanced materials.

[54]  H. Che,et al.  Hierarchical dandelion-like copper oxide wrapped by reduced graphene oxide: Hydrothermal synthesis and their application in supercapacitors , 2016 .

[55]  Jiajun Chen,et al.  Recent Progress in Advanced Materials for Lithium Ion Batteries , 2013, Materials.

[56]  Yu Zhou,et al.  Self-assembled synthesis of hierarchical nanostructured CuO with various morphologies and their application as anodes for lithium ion batteries , 2010 .