Achieving the strength-ductility balance of boron nitride nanosheets/Al composite by designing the synergistic transition interface and intragranular reinforcement distribution
暂无分享,去创建一个
N. Zhao | C. He | Lishi Ma | Xiang Zhang | Bowen Pu | Dongdong Zhao
[1] Yuanfei Han,et al. Configuration of new fiber-like structure driven high matching of strength-ductility in TiB reinforced titanium matrix composites , 2022, Composites Part B: Engineering.
[2] D. Xiong,et al. Towards the strength-ductility synergy of Al2O3/Al composite through the design of roughened interface , 2021 .
[3] Yonghao Zhao. In situ thermomechanical processing to avoid grain boundary precipitation and strength-ductility loss of age hardening alloys , 2021 .
[4] N. Zhao,et al. Simultaneously enhanced strength and ductility of Al matrix composites through the introduction of intragranular nano-sized graphene nanoplates , 2021 .
[5] Di Zhang,et al. Reinforcement with intragranular dispersion of carbon nanotubes in aluminum matrix composites , 2021, Composites Part B: Engineering.
[6] Hongmei Zhang,et al. Simultaneously enhancing strength and ductility in graphene nanoplatelets reinforced titanium (GNPs/Ti) composites through a novel three-dimensional interface design , 2021, Composites Part B: Engineering.
[7] D. Golberg,et al. Elevated-temperature high-strength h-BN-doped Al2014 and Al7075 composites: Experimental and theoretical insights , 2021 .
[8] Tijun Chen,et al. Overcoming the strength-ductility trade-off of an aluminum matrix composite by novel core-shell structured reinforcing particulates , 2021 .
[9] C. Shi,et al. In-situ Al2O3-Al interface contribution towards the strength-ductility synergy of Al-CuO composite fabricated by solid-state reactive sintering , 2021 .
[10] C. Shi,et al. Revealing the Strengthening and Toughening Mechanisms of Al-CuO Composite Fabricated Via In-Situ Solid-State Reaction , 2020, Acta Materialia.
[11] C. Shi,et al. In-situ synthesis of CNTs@Al2O3 wrapped structure in aluminum matrix composites with balanced strength and toughness , 2020 .
[12] S. Hong,et al. Enhanced mechanical properties of boron nitride nanosheet/copper nanocomposites via a molecular-level mixing process , 2020 .
[13] C. Zhang,et al. Boron Nitride Nanotube–Reinforced Titanium Composite with Controlled Interfacial Reactions by Spark Plasma Sintering , 2020, Advanced Engineering Materials.
[14] Luyao Chen,et al. Hierarchical microstructure architecture: A roadmap towards strengthening and toughening reduced graphene oxide/2024Al matrix composites synthesized by flake powder thixoforming , 2020 .
[15] K. Shizawa,et al. Modelling and simulation of dynamic recrystallisation based on multi-phase-field and dislocation-based crystal plasticity models , 2020 .
[16] A. Agarwal,et al. Interface Engineering and Direct Observation of Strengthening Behavior in Field‐Sintered Boron Nitride Nanotube–Magnesium Alloy Composite , 2020, Advanced Engineering Materials.
[17] N. Zhao,et al. Microstructure and properties of copper coated graphene nanoplates reinforced Al matrix composites developed by low temperature ball milling , 2020, Carbon.
[18] A. Montazeri,et al. Evolution in aluminum applications by numerically-designed high strength boron-nitride/Al nanocomposites , 2020 .
[19] C. Shi,et al. Orientation relationships and interface structure in MgAl2O4 and MgAlB4 co-reinforced Al matrix composites. , 2019, ACS applied materials & interfaces.
[20] G. Ji,et al. Microstructure-based modeling on structure-mechanical property relationships in carbon nanotube/aluminum composites , 2019, International Journal of Plasticity.
[21] G. Ji,et al. Interface-induced strain hardening of graphene nanosheet/aluminum composites , 2019, Carbon.
[22] B. Xiao,et al. Enhancing strength and ductility synergy through heterogeneous structure design in nanoscale Al2O3 particulate reinforced Al composites , 2019, Materials & Design.
[23] D. Golberg,et al. Spark plasma sintered Al-based composites reinforced with BN nanosheets exfoliated under ball milling in ethylene glycol , 2019, Materials Science and Engineering: A.
[24] T. Langdon,et al. The fabrication of graphene-reinforced Al-based nanocomposites using high-pressure torsion , 2019, Acta Materialia.
[25] E. Bagherpour,et al. Fabrication of Al/AlN in-situ nanocomposite through planetary ball milling and hot extrusion of Al/BN: Microstructural evaluation and mechanical behavior , 2018, Journal of Alloys and Compounds.
[26] C. Shi,et al. Effect of Interface Structure on the Mechanical Properties of Graphene Nanosheets Reinforced Copper Matrix Composites. , 2018, ACS applied materials & interfaces.
[27] Zhiwei Liu,et al. Revealing the novel fracture mechanism of the interfaces of TiB2/Fe composite from a first principles investigation , 2018, Acta Materialia.
[28] X. Ren,et al. Interface relationship between TiN and Ti substrate by first-principles calculation , 2018, Computational Materials Science.
[29] Di Zhang,et al. Tailoring the structure and mechanical properties of graphene nanosheet/aluminum composites by flake powder metallurgy via shift-speed ball milling , 2018, Composites. Part A, Applied science and manufacturing.
[30] Fan Wang,et al. Interface structure and strengthening behavior of graphene/CuCr composites , 2018, Carbon.
[31] Fan Wang,et al. Interface and mechanical/thermal properties of graphene/copper composite with Mo2C nanoparticles grown on graphene , 2018, Composites Part A: Applied Science and Manufacturing.
[32] D. Golberg,et al. Al-based composites reinforced with AlB2, AlN and BN phases: experimental and theoretical studies , 2018 .
[33] Ping Wu,et al. Stability of the Al/TiB 2 interface and doping effects of Mg/Si , 2017 .
[34] X. Zhang,et al. Achieving high strength and high ductility in metal matrix composites reinforced with a discontinuous three-dimensional graphene-like network. , 2017, Nanoscale.
[35] Di Zhang,et al. Simultaneously enhancing the strength, ductility and conductivity of copper matrix composites with graphene nanoribbons , 2017 .
[36] S. Seal,et al. Reactive wetting and filling of boron nitride nanotubes by molten aluminum during equilibrium solidification , 2017 .
[37] P. Hodgson,et al. Interfacial reactions between titanium and boron nitride nanotubes , 2017 .
[38] A. Krasheninnikov,et al. Mechanical properties and current-carrying capacity of Al reinforced with graphene/BN nanoribbons: a computational study. , 2016, Nanoscale.
[39] J. Schoenung,et al. Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles , 2016 .
[40] C. Zhang,et al. Aluminum matrix composites reinforced with multi-walled boron nitride nanotubes fabricated by a high-pressure torsion technique , 2015 .
[41] Zan Li,et al. Synergistic strengthening effect of graphene-carbon nanotube hybrid structure in aluminum matrix composites , 2015 .
[42] J. Schoenung,et al. Influence of length-scales on spatial distribution and interfacial characteristics of B4C in a nanostructured Al matrix , 2015 .
[43] Junha Shin,et al. Strengthening behavior of few-layered graphene/aluminum composites , 2015 .
[44] X. M. Zhang,et al. Enhanced tensile properties of aluminium matrix composites reinforced with graphene encapsulated SiC nanoparticles , 2015 .
[45] S. Han,et al. Strength and strain hardening of aluminum matrix composites with randomly dispersed nanometer-length fragmented carbon nanotubes , 2013 .
[46] E. Ma,et al. Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility. , 2013, Nature materials.
[47] S. Seal,et al. Insight into reactions and interface between boron nitride nanotube and aluminum , 2012 .
[48] Zhi Xu,et al. Young modulus, mechanical and electrical properties of isolated individual and bundled single-walled boron nitride nanotubes , 2011, Nanotechnology.
[49] Junya Inoue,et al. Effect of interfacial bonding strength on tensile ductility of multilayered steel composites , 2009 .
[50] K. Peters,et al. A shear-lag model for three-dimensional, unidirectional multilayered structures , 2008 .
[51] Evan Ma,et al. Optimizing the strength and ductility of fine structured 2024 Al alloy by nano-precipitation , 2007 .
[52] Z. Zhang,et al. Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength , 2006 .
[53] Y. H. Zhao,et al. Enhanced mechanical properties in ultrafine grained 7075 Al alloy , 2005 .
[54] N. Hansen,et al. Hall–Petch relation and boundary strengthening , 2004 .
[55] R. Valiev,et al. Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing , 2004 .
[56] Abhijit P. Suryavanshi,et al. Elastic modulus and resonance behavior of boron nitride nanotubes , 2004 .
[57] Huajian Gao,et al. Materials become insensitive to flaws at nanoscale: Lessons from nature , 2003, Proceedings of the National Academy of Sciences of the United States of America.
[58] D. G. Morris,et al. An analysis of strengthening mechanisms in a mechanically alloyed, oxide dispersion strengthened iron aluminide intermetallic , 2002 .
[59] L. McCartney,et al. PREDICTING TRANSVERSE CRACK FORMATION IN CROSS-PLY LAMINATES 1 This article represents the author's , 1998 .
[60] S. Macewen,et al. Cross-slip of Orowan loops at incoherent particles , 1973 .