Investigation of redox initiators for free radical frontal polymerization

BACKGROUND: The reaction temperature for frontal polymerization (FP) initiated by redox initiators can be greatly decreased compared with FP initiated by peroxide initiator and disulfide initiator. We report the synthesis of poly(hydroxyethyl acrylate)s via free radical FP using benzoyl peroxide (BPO)/N,N-dimethylaniline (DMA) and ammonium persulfate (APS)/N,N,N′,N′-tetramethylethylenediamine (TMEDA) couples as redox initiators at ambient pressure. RESULTS: The results show that unlike the phenomenon of bubbles and ‘fingers’ when using BPO alone, a self-sustaining and stable front can be obtained when the [DMA]/[BPO] ratio is higher than 1 (mol/mol). A slight increase of the DMA (or TMEDA) reductant concentration causes a marked decrease of front temperature to 53 °C (or 61 °C). CONCLUSION: We investigated the effects of the ratio of the oxidant to the reductant and the initiator and monomer concentrations on certain parameters of FP: formation of bubbles, front velocity and front temperature. This opens the way to the potential development of FP using more appropriate monomers with low boiling points. Copyright © 2009 Society of Chemical Industry

[1]  Su Chen,et al.  Solvent‐free free‐radical frontal polymerization: A new approach to quickly synthesize poly(N‐vinylpyrrolidone) , 2008 .

[2]  Huan Yu,et al.  First solvent-free synthesis of poly(N-methylolacrylamide) via frontal free-radical polymerization , 2007 .

[3]  Su Chen,et al.  Facile synthesis of poly(hydroxyethyl acrylate) by frontal free-radical polymerization , 2007 .

[4]  Huan Yu,et al.  Synthesis of poly(N-methylolacrylamide)/polymethylacrylamide hybrids via frontal free-radical polymerization , 2007 .

[5]  S. Ponrathnam,et al.  Water‐Triggered Frontal Polymerization , 2007 .

[6]  Su Chen,et al.  Frontal Free-Radical Copolymerization of Urethane-Acrylates , 2006 .

[7]  Yuan Tian,et al.  Epoxy resin/polyurethane hybrid networks synthesized by frontal polymerization , 2006 .

[8]  Su Chen,et al.  Polyurethane–nanosilica hybrid nanocomposites synthesized by frontal polymerization , 2005 .

[9]  Su Chen,et al.  Segmented polyurethane synthesized by frontal polymerization , 2005 .

[10]  J. Pojman,et al.  Free-Radical Frontal Polymerization with a Microencapsulated Initiator , 2004 .

[11]  G. Odian,et al.  Radical Chain Polymerization , 2004 .

[12]  J. Pojman,et al.  Frontal Polymerization with Thiol−Ene Systems , 2004 .

[13]  Roberta Maria Bongiovanni,et al.  UV‐ignited frontal polymerization of an epoxy resin , 2004 .

[14]  Nicole Gill,et al.  Polymer‐dispersed liquid‐crystal materials fabricated with frontal polymerization , 2003 .

[15]  M. Rustici,et al.  The effect of reactor geometry on frontal polymerization spin modes. , 2002, Chaos.

[16]  Burm-Jong Lee,et al.  Reaction condition dependency of propagating behavior in the polymerization reaction by thermal front , 2002 .

[17]  O. Steinbock,et al.  Frontal polymerization synthesis of temperature-sensitive hydrogels. , 2001, Journal of the American Chemical Society.

[18]  J. Pojman,et al.  Optical Gradient Materials Produced via Low-Temperature Isothermal Frontal Polymerization , 2001 .

[19]  J. Pojman,et al.  Preparation of functionally gradient materials via frontal polymerization , 2000 .

[20]  Baki Hazer,et al.  Dispersion redox copolymerization of methyl methacrylate with macromonomeric azoinitiator as a macrocrosslinker , 2000 .

[21]  Jonathan Masere,et al.  Period-doubling behavior in frontal polymerization of multifunctional acrylates. , 1999, Chaos.

[22]  M. Morbidelli,et al.  Polymer blends by self-propagating frontal polymerization , 1998 .

[23]  J. Pojman,et al.  Single-head spin modes in frontal polymerization. , 1998, Chaos.

[24]  V. Volpert,et al.  Mathematical Modeling of Free-Radical Polymerization Fronts , 1997 .

[25]  L. Mathias,et al.  Binary frontal polymerization: A new method to produce simultaneous interpenetrating polymer networks (SINs) , 1997 .

[26]  J. Pojman,et al.  The true molecular weight distributions of acrylate polymers formed in propagating fronts , 1996 .

[27]  J. Pojman,et al.  Frontal Polymerization in Solution , 1996 .

[28]  J. Pojman,et al.  Factors affecting propagating fronts of addition polymerization: Velocity, front curvature, temperatue profile, conversion, and molecular weight distribution , 1995 .

[29]  István Nagy,et al.  THERMOCHROMIC COMPOSITE PREPARED VIA A PROPAGATING POLYMERIZATION FRONT , 1995 .

[30]  J. Pojman,et al.  Traveling fronts of addition polymerization with a solid monomer , 1993 .

[31]  J. Pojman.  Traveling fronts of methacrylic acid polymerization , 1991 .

[32]  P. V. Zhirkov,et al.  Problems of Non-isothermal Character in Polymerisation Processes , 1984 .

[33]  K. Sugiyama,et al.  Cage effects in nitrogen radical formation , 1978 .