An Embedded Fiber Optic Sensor Method for Determining Residual Stresses in Fiber-Reinforced Composite Materials

A method to determine process-induced residual stress in fiber-reinforced composite materials using strain measurements from embedded fiber optic sensors is presented. This method allows non-destructive, real-time determination of residual macrostress in these materials and may be useful for both process monitoring and control. Extrinsic Fabry-Perot interferometer strain sensors were embedded in Hercules AS4/3501-6 graphite/epoxy composite specimens prior to cure. The specimens were cured in a press, and the internal strains and temperatures developed during processing were monitored and recorded. Residual macrostresses were computed from these measurements using a viscoelastic model of the material. The results compare favorably with analytical predictions, previous experimental measurements from a destructive technique, and with measurements of warpage of a non-symmetric laminate.

[1]  A. J. Fletcher,et al.  Thermal residual microstress generation during the processing of unidirectional carbon fibre/epoxy resin composites: regular fibre arrays , 1994 .

[2]  John C. Halpin,et al.  Primer on Composite Materials Analysis , 1984 .

[3]  Costas Galiotis,et al.  Residual stress distribution in carbon fibre/thermoplastic matrix pre-impregnated composite tapes , 1992 .

[4]  G. Springer,et al.  Curing of Epoxy Matrix Composites , 1983 .

[5]  Scott R. White,et al.  Process Modeling of Composite Materials: Residual Stress Development during Cure. Part I. Model Formulation , 1992 .

[6]  C. Belleville,et al.  White-light interferometric multimode fiber-optic strain sensor. , 1993, Optics letters.

[7]  Raymond M. Measures,et al.  Composite-material-embedded fiber optic Fabry-Perot strain rosette , 1990, Other Conferences.

[8]  Isaac M Daniel,et al.  Thermoviscoelastic Analysis of Residual Stresses and Warpage in Composite Laminates , 1992 .

[9]  D. Morris,et al.  Time-Temperature Behavior of a Unidirectional Graphite/Epoxy Composite , 1979 .

[10]  N. G. Mccrum,et al.  Principles Of Polymer Engineering , 1988 .

[11]  Allan S. Crasto,et al.  On the Determination of Residual Stresses in Fiber-Reinforced Thermoset Composites , 1993 .

[12]  Scott R. White,et al.  Process-Induced Stress Relaxation Analysis of AS4/3501-6 Laminate , 1997 .

[13]  Craig M. Lawrence,et al.  Validation of the absolute extrinsic Fabry-Perot interferometer for strain measurements , 1995, Pacific Northwest Fiber Optic Sensor.

[14]  Scott R. White,et al.  Stress relaxation during cure of 3501-6 epoxy resin , 1995 .

[15]  S. Tsai,et al.  Introduction to composite materials , 1980 .

[16]  Craig M. Lawrence,et al.  Measurement of process-induced strains in composite materials using embedded fiber optic sensors , 1996 .

[17]  Harold E. Gascoigne,et al.  Residual surface stresses in laminated cross-ply fiber-epoxy composite materials , 1994 .

[18]  David R. Clarke,et al.  Measurement of residual stresses in sapphire fiber composites using optical fluorescence , 1993 .

[19]  Isaac M Daniel,et al.  Effect of laminate construction on residual stresses in graphite/polyimide composites , 1977 .

[20]  Isaac M Daniel,et al.  Determination of Chemical Cure Shrinkage in Composite Laminates , 1990 .

[21]  B. D. Agarwal,et al.  Analysis and Performance of Fiber Composites , 1980 .

[22]  Sung-Hoon Ahn,et al.  Effects of Processing Temperature and Layup on Springback , 1995 .

[23]  J. Sirkis.  Unified approach to phase-strain-temperature models for smart structure interferometric optical fiber sensors: part 1, development , 1993 .

[24]  G. Sendeckyj,et al.  Review of the mechanics of embedded optical sensors , 1995 .

[25]  Eric Udd.  Fiber optic smart structures , 1996 .