Nitrogen plasma-implanted titanium as bipolar plates in polymer electrolyte membrane fuel cells

Nitrogen plasma immersion ion implantation (PIII), a non-line-of-sight surface treatment technique suitable for bipolar plates in polymer electrolyte membrane fuel cells, is conducted at low and high temperature to improve the corrosion resistance and conductivity of titanium sheets. X-ray photoelectron spectroscopy (XPS) shows that high-temperature (HT) nitrogen PIII produces a thick oxy-nitride layer on the titanium surface. This layer which provides good corrosion resistance and high electrical conductivity as verified by electrochemical tests, inductively coupled plasma optical emission spectroscopy, and interfacial contact resistance (ICR) measurements renders the materials suitable for polymer electrolyte membrane fuel cells. In comparison, the low-temperature (LT) PIII titanium sample exhibits poorer corrosion resistance and electrical conductivity than the untreated titanium control.

[1]  Juncai Sun,et al.  Study on behavior of plasma nitrided 316L in PEMFC working conditions , 2008 .

[2]  J. J. Lee,et al.  Titanium oxynitride films for a bipolar plate of polymer electrolyte membrane fuel cell prepared by inductively coupled plasma assisted reactive sputtering , 2009 .

[3]  J. Marcinkoski,et al.  Progress in the US DOE fuel cell subprogram efforts in polymer electrolyte fuel cells , 2008 .

[4]  D. Hodgson,et al.  New lightweight bipolar plate system for polymer electrolyte membrane fuel cells , 2001 .

[5]  Yan Wang,et al.  An investigation of the electrochemical properties of PVD TiN-coated SS410 in simulated PEM fuel cell environments , 2007 .

[6]  P. J. Sebastian,et al.  Conducting polymer-coated stainless steel bipolar plates for proton exchange membrane fuel cells (PEMFC) , 2005 .

[7]  Dazhi Yang,et al.  EIS diagnosis on the corrosion behavior of TiN coated NiTi surgical alloy , 2005 .

[8]  Viral S. Mehta,et al.  Review and analysis of PEM fuel cell design and manufacturing , 2003 .

[9]  B. Popov,et al.  Performance of gold-coated titanium bipolar plates in unitized regenerative fuel cell operation , 2009 .

[10]  Suzhen Luo,et al.  Corrosion behavior of TiN coated type 316 stainless steel in simulated PEMFC environments , 2004 .

[11]  Nathan W. Cheung,et al.  Plasma immersion ion implantation—a fledgling technique for semiconductor processing , 1996 .

[12]  Yan Wang,et al.  An investigation into TiN-coated 316L stainless steel as a bipolar plate material for PEM fuel cells , 2007 .

[13]  Hitoshi Yashiro,et al.  Corrosion behavior of austenitic stainless steels as a function of pH for use as bipolar plates in polymer electrolyte membrane fuel cells , 2008 .

[14]  John A. Turner,et al.  Ferritic stainless steels as bipolar plate material for polymer electrolyte membrane fuel cells , 2004 .

[15]  Y. Show,et al.  Increased in output power from fuel cell used metal bipolar plate coated with a-C film , 2007 .

[16]  A. Pozio,et al.  Corrosion Study on Different Types of Metallic Bipolar Plates for Polymer Electrolyte Membrane Fuel Cells , 2007 .

[17]  Ramana G. Reddy,et al.  Corrugated bipolar sheets as fuel distributors in PEMFC , 2006 .

[18]  B. Elsener,et al.  Impedance Study on the Corrosion of PVD and CVD Titanium Nitride Coatings , 1991 .

[19]  P. Chu,et al.  Conductive amorphous carbon-coated 316L stainless steel as bipolar plates in polymer electrolyte membrane fuel cells , 2009 .

[20]  Junying Chen,et al.  Plasma-surface modification of biomaterials , 2002 .

[21]  P. Chu,et al.  Formation of titanium nitride barrier layer in nickel-titanium shape memory alloys by nitrogen plasma immersion ion implantation for better corrosion resistance , 2005 .

[22]  Bing Yang,et al.  Growth of Cr-Nitrides on commercial Ni–Cr and Fe–Cr base alloys to protect PEMFC bipolar plates , 2007 .

[23]  P. Adcock,et al.  Stainless steel as a bipolar plate material for solid polymer fuel cells , 2000 .

[24]  Jing Liu,et al.  Plasma nitrided titanium as a bipolar plate for proton exchange membrane fuel cell , 2009 .

[25]  Yoshiaki Matsuo,et al.  Carbon-coated stainless steel as PEFC bipolar plate material , 2007 .

[26]  Ramana G. Reddy,et al.  Materials and design development for bipolar/end plates in fuel cells , 2004 .

[27]  Allen M. Hermann,et al.  Bipolar plates for PEM fuel cells: A review , 2005 .

[28]  A. Pozio,et al.  Surface conductivity and stability of metallic bipolar plate materials for polymer electrolyte fuel cells , 2006 .

[29]  Ho Jang,et al.  Corrosion resistance of chromized 316L stainless steel for PEMFC bipolar plates , 2008 .

[30]  Heli Wang,et al.  Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells , 2003 .

[31]  Wai-Bun Lui,et al.  Surface modification and development of titanium bipolar plates for PEM fuel cells , 2006 .