Model for on-line moisture-content control during solid-state fermentation.

In this study we describe a model that estimates the extracellular (nonfungal) and overall water contents of wheat grains during solid-state fermentation (SSF) with Aspergillus oryzae, using on-line measurements of oxygen, carbon dioxide, and water vapor in the gas phase. The model uses elemental balances to predict substrate dry matter losses from carbon dioxide measurements, and metabolic water production, water used in starch hydrolysis, and water incorporated in new biomass from oxygen measurements. Water losses caused by evaporation were calculated from water vapor measurements. Model parameters were determined using an experimental membrane-based model system, which mimicked the growth of A. oryzae on the wheat grains and permitted direct measurement of the fungal biomass dry weight and wet weight. The measured water content of the biomass depended heavily on the moisture content of the solid substrate and was significantly lower than the estimated values reported in the literature. The model accurately predicted the measured overall water content of fermenting solid substrate during fermentations performed in a 1.5-L scraped drum reactor and in a 35-L horizontal paddle mixer, and is therefore considered validated. The model can be used to calculate the water addition required to control the extracellular water content in a mixed solid-state bioreactor for cultivation of A. oryzae on wheat.

[1]  C. Larroche,et al.  Characterization of the growth and sporulation behavior of Penicillium roquefortii in solid substrate fermentation by material and bioenergetic balances , 1992, Biotechnology and bioengineering.

[2]  J Baranyi,et al.  Predicting fungal growth: the effect of water activity on Aspergillus flavus and related species. , 1994, International journal of food microbiology.

[3]  M. N. Karim,et al.  Effect of operating conditions on solid substrate fermentation , 1993, Biotechnology and bioengineering.

[4]  Johannes Tramper,et al.  Basic Bioreactor Design , 1991 .

[5]  B. K. Lonsane,et al.  Coffee husk: an inexpensive substrate for production of citric acid by Aspergillus niger in a solid-state fermentation system , 1994, World journal of microbiology & biotechnology.

[6]  Toshiomi Yoshida,et al.  Control of Water Content in a Solid-State Culture of Aspergillus oryzae , 1984 .

[7]  T. Uozumi,et al.  A New Method for Estimation of the Mycelial Weight in Koji , 1967 .

[8]  Gerardo Saucedo-Castañeda,et al.  Scale-up strategies for solid state fermentation systems , 1992 .

[9]  W. Knol,et al.  The influence of temperature on kinetics in solid-state fermentation , 1998 .

[10]  J. Whipps,et al.  Biology of Coniothyrium minitans and its potential for use in disease biocontrol , 1992 .

[11]  Ashok Pandey,et al.  Recent process developments in solid-state fermentation , 1992 .

[12]  G. Stephanopoulos,et al.  Application of macroscopic balances to the identification of gross measurement errors , 1983, Biotechnology and bioengineering.

[13]  Tae-Ho Lee,et al.  On the Convenient Method for Glucosamine Estimation in Koji , 1977 .

[14]  Vincent G. Murphy,et al.  Evaporative temperature and moisture control in a rocking reactor for solid substrate fermentation , 1991 .

[15]  Gerardo Saucedo-Castañeda,et al.  Maintenance of heat and water balances as a scale-up criterion for the production of ethanol by Schwanniomyces castellii in a solid state fermentation system , 1992 .

[16]  Christian Larroche,et al.  A convenient method for initial dry weight determination in samples from solid state cultivations , 1998 .

[17]  Tramper,et al.  Model-based bioreactor selection for large-scale solid-state cultivation of Coniothyrium minitans spores on oats. , 2000, Enzyme and microbial technology.

[18]  Y. Pomeranz,et al.  Amino Acid Composition of Wheat Varieties and Flours Varying Widely in Bread-Making Potentialities , 1966 .

[19]  M Carlsen,et al.  Growth and product formation of Aspergillus oryzae during submerged cultivations: verification of a morphologically structured model using fluorescent probes. , 1998, Biotechnology and bioengineering.

[20]  J Tramper,et al.  Temperature control in a continuously mixed bioreactor for solid-state fermentation. , 2001, Biotechnology and bioengineering.